Search NASA⌕ Search

Engineering topics

Sinars, Daniel

Publications and source records attributed to Sinars, Daniel.

At least 109 records · Page 6

The Magnetically Driven Direct Drive Approach to Ignition: Responses to Questions by Panel 1 of the FY15 ICF Program Review

The long-term goal of the pulsed-­power based, magnetically driven target approach is to achieve high single­-shot yields (0.5-­1 GJ per shot). This goal may take decades to achieve, but if successful we believe it would be a key capability for the Stockpile Stewardship program, as noted as far back as 1988 in the Laboratory Microfusion Capability Phase 1 (U) study. If this approach is successful, it may be possible to achieve these yields from targets absorbing up to 10 MJ in a laboratory pulsed power facility with a stored energy of roughly 130 MJ. Such a facility would be substantially cheaper, and not as complex, than the corresponding pulsed power facility required for producing comparable yields from x-ray driven capsule targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low Adiabat Compression of Liquid Deuterium Filled Cylindrical Liners to 0.1?2 Gbar.

We report on experiments where cylindrical beryllium liners filled with liquid deuterium were compressed to extreme pressure and density with current pulse shaping. In one set of experiments the pressure at stagnation is inferred to be & 100 Mbar using penetrating radiography. A peak liner convergence ratio (initial radius over final radius) of 7.6 was measured resulting in an average deuterium density of 10 g=cm 3 and areal density of 0.45 g=cm 2 . The stagnation shock propagating radially outward through the liner wall was directly measured with a strength of ≈ 120 Mbar. In a second set of experiments the liner was imploded to a peak convergence of 19 resulting in a density of 55 g=cm 3 and areal density of 0.5 g=cm 2 . The pressure at stagnation in this experiment is estimated to be 2 Gbar. This platform enables the study of high-pressure, high-density, implosion deceleration and stagnation dynamics at spatial scales that are readily diagnosable (R ~ 0.1 -- 0.4 mm). Thus, these experiments are directly relevant to both Inertial Con nement Fusion and the study of material properties under extreme conditions.

Knapp, Patrick↗

Recent Progress and Future Potential of Magnetized Liner Inertial Fusion (MagLIF)

The standard approaches to inertial confinement fusion (ICF) rely on implosion velocities greater than 300 km/s and spherical convergence to achieve the high fuel temperatures (T > 4 keV) and areal densities (ρr > 0.3 g/cm2) required for ignition1. Such high velocities are achieved by heating the outside surface of a spherical capsuleeither directly with a large number of laser beams (Direct Drive) or with x-rays generated within a hohlraum (Indirect Drive). A much more energetically efficient approach is to use the magnetic pressure generated by a pulsed power machine to directly drive an implosion. In this approach 5-10% of the stored energy can be converted to the implosion of a metal tube generally referred to as a “liner”. However, the implosion velocity is not very high 70-100 km/s and the convergence is cylindrical (rather than spherical) making it more difficult to achieve the high temperatures and areal densities needed for ignition.

Slutz, Stephen A.↗