Search NASA⌕ Search

Engineering topics

Singer, S.

Publications and source records attributed to Singer, S..

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Starting characteristics of direct current motors powered by solar cells

Direct current motors are used in photovoltaic systems. Important characteristics of electric motors are the starting to rated current and torque ratios. These ratios are dictated by the size of the solar cell array and are different for the various dc motor types. Discussed here is the calculation of the starting to rated current ratio and starting to rated torque ratio of the permanent magnet, and series and shunt excited motors when powered by solar cells for two cases: with and without a maximum-power-point-tracker (MPPT) included in the system. Comparing these two cases, one gets a torque magnification of about 3 for the permanent magnet motor and about 7 for other motor types. The calculation of the torques may assist the PV system designer to determine whether or not to include an MPPT in the system.

Singer, S.↗
NASA NTRS1989

Magnification of starting torques of dc motors by maximum power point trackers in photovoltaic systems

Direct current (dc) motors are used in terrestrial photovoltaic (PV) systems such as in water-pumping systems for irrigation and water supply. Direct current motors may also be used for space applications. Simple and low weight systems including dc motors may be of special interest in space where the motors are directly coupled to the solar cell array (with no storage). The system will operate only during times when sufficient insolation is available. An important performance characteristic of electric motors is the starting to rated torque ratio. Different types of dc motors have different starting torque ratios. These ratios are dictated by the size of solar cell array, and the developed motor torque may not be sufficient to overcome the load starting torque. By including a maximum power point tracker (MPPT) in the PV system, the starting to rated torque ratio will increase, the amount of which depends on the motor type. The starting torque ratio is calculated for the permanent magnet, series and shunt excited dc motors when powered by solar cell arrays for two cases: with and without MPPT's. Defining a motor torque magnification by the ratio of the motor torque with an MPPT to the motor torque without an MPPT, a magnification of 3 was obtained for the permanent magnet motor and a magnification of 7 for both the series and shunt motors. The effect of the variation of solar insolation on the motor starting torque was covered. All motor types are less sensitive to insolation variation in systems including MPPT's as compared to systems with MPPT's. The analysis of this paper will assist the PV system designed to determine whether or not to include an MPPT in the system for a specific motor type.

Appelbaum, Joseph↗
NASA NTRS1989

Magnification of starting torques of dc motors by maximum power point trackers in photovoltaic systems

A calculation of the starting torque ratio of permanent magnet, series, and shunt-excited dc motors powered by solar cell arrays is presented for two cases, i.e., with and without a maximum-power-point tracker (MPPT). Defining motor torque magnification by the ratio of the motor torque with an MPPT to the motor torque without an MPPT, a magnification of 3 for the permanent magnet motor and a magnification of 7 for both the series and shunt motors are obtained. The study also shows that all motor types are less sensitive to solar insolation variation in systems including MPPTs as compared to systems without MPPTs.

Appelbaum, J.↗
NASA NTRS1978

Bidirectional anisotropies in solar cosmic ray events - Evidence for magnetic bottles

During the period 1967-1973 data were obtained from five satellites in order to investigate bidirectional anisotropies in low-energy solar protons and to study electron events. Detailed consideration is given to the characteristics of two observed solar electron events. It is particularly noted that (1) the mean duration of bidirectional anisotropy is about 9 hours, (2) for most events the bidirectional anisotropy occurs at the minimum of the associated Forbush decrease, (3) the existence of bidirectional anisotropy in subrelativistic electrons associated with an interplanetary shock is not expected as anisotropies in impulsive solar electron events usually decay quickly within a time of not more than an hour at 1 AU, and (4) simultaneous observations show a significant difference in the nature of the angular distributions first between electrons and protons and second between different proton energies. The formation of bidirectional anisotropy by propagation and by energy change is also discussed.

Palmer, I. D.↗
NASA NTRS1971

Magnetospheric substorm of August 25-26, 1967

Temporal history of 25-26 August 1967 magnetospheric substorm, discussing magnetotail plasma sheet thinning, partial ring current buildup and magnetic bays development

Hones, E. W., Jr.↗
NASA NTRS1970

Nuclear alkylated pyridine aldehyde polymers and conductive compositions thereof

A thermally stable, relatively conductive polymer was disclosed. The polymer was synthesized by condensing in the presence of catalyst a 2, 4, or 6 nuclear alklylated 2, 3, or 4 pyridine aldehyde or quaternary derivatives thereof to form a polymer. The pyridine groups were liked by olefinic groups between 2-4, 2-6, 2-3, 3-4, 3-6 or 4-6 positions. Conductive compositions were prepared by dissolving the quaternary polymer and an organic charge transfer complexing agent such as TCNQ in a mutual solvent such as methanol.

Rembaum, A.↗
NASA NTRS1969

Ionene polymers. III

Dicationic crosslinking agents isolation and characterization and formation of polymers with ionic crosslinks

Keyzer, H.↗