Search NASA⌕ Search

Engineering topics

Singh, Ajay

Publications and source records attributed to Singh, Ajay.

29 records · Page 2

Study of thermal stability of Cu{sub 2}Se thermoelectric material

Sustainability of thermoelectric parameter in operating temperature range is a key consideration factor for fabricating thermoelectric generator or cooler. In present work, we have studied the stability of thermoelectric parameter of Cu{sub 2}Se within the temperature range of 50-800°C. Temperature dependent Seebeck coefficients and electrical resistivity measurement are performed under three continuous thermal cycles. X-ray diffraction pattern shows the presence of mixed cubic-monoclinic Cu{sub 2}Se phase in bare pellet which transforms to pure α-Cu{sub 2}Se phase with repeating thermal cycle. Significant enhancement in Seebeck coefficient and electrical resistivity is observed which may be attributed to (i) Se loss observed in EDS and (ii) the phase transformation from mixed cubic-monoclinic structure to pure monoclinic α-Cu{sub 2}Se phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Linking Semiconductor Nanocrystals into Gel Networks through All‐Inorganic Bridges

Abstract For colloidal semiconductor nanocrystals (NCs), replacement of insulating organic capping ligands with chemically diverse inorganic clusters enables the development of functional solids in which adjacent NCs are strongly coupled. Yet controlled assembly methods are lacking to direct the arrangement of charged, inorganic cluster‐capped NCs into open networks. Herein, we introduce coordination bonds between the clusters capping the NCs thus linking the NCs into highly open gel networks. As linking cations (Pt 2+ ) are added to dilute (under 1 vol %) chalcogenidometallate‐capped CdSe NC dispersions, the NCs first form clusters, then gels with viscoelastic properties. The phase behavior of the gels for variable [Pt 2+ ] suggests they may represent nanoscale analogues of bridged particle gels, which have been observed to form in certain polymer colloidal suspensions.

Singh, Amita↗

Linking Semiconductor Nanocrystals into Gel Networks through All‐Inorganic Bridges

Abstract For colloidal semiconductor nanocrystals (NCs), replacement of insulating organic capping ligands with chemically diverse inorganic clusters enables the development of functional solids in which adjacent NCs are strongly coupled. Yet controlled assembly methods are lacking to direct the arrangement of charged, inorganic cluster‐capped NCs into open networks. Herein, we introduce coordination bonds between the clusters capping the NCs thus linking the NCs into highly open gel networks. As linking cations (Pt 2+ ) are added to dilute (under 1 vol %) chalcogenidometallate‐capped CdSe NC dispersions, the NCs first form clusters, then gels with viscoelastic properties. The phase behavior of the gels for variable [Pt 2+ ] suggests they may represent nanoscale analogues of bridged particle gels, which have been observed to form in certain polymer colloidal suspensions.

Singh, Amita↗

Micro-structural characterization of low resistive metallic Ni germanide growth on annealing of Ni-Ge multilayer

Nickel-Germanides are an important class of metal semiconductor alloys because of their suitability in microelectronics applications. Here we report successful formation and detailed characterization of NiGe metallic alloy phase at the interfaces of a Ni-Ge multilayer on controlled annealing at relatively low temperature ∼ 250 °C. Using x-ray and polarized neutron reflectometry, we could estimate the width of the interfacial alloys formed with nanometer resolution and found the alloy stoichiometry to be equiatomic NiGe, a desirable low-resistance interconnect. We found significant drop in resistance (∼ 50%) on annealing the Ni-Ge multilayer suggesting metallic nature of alloy phase at the interfaces. Further we estimated the resistivity of the alloy phase to be ∼ 59μΩ cm.

36 MATERIALS SCIENCE↗

Flexible cobalt-phthalocyanine thin films with high charge carrier mobility

The structural and charge transport characteristics of cobalt phthalocyanine (CoPc) films deposited on flexible bi-axially oriented polyethylene terephthalate (BOPET) substrates are investigated. CoPc films exhibited a preferential (200) orientation with charge carrier mobility of {approx}118 cm{sup 2} V{sup -1} s{sup -1} (at 300 K). These films exhibited a reversible resistance changes upon bending them to different radius of curvature. The charge transport in CoPc films is governed by a bias dependent crossover from ohmic (J-V) to trap-free space-charge limited conduction (J-V{sup 2}). These results demonstrate that CoPc films on flexible BOPET having high mobility and high mechanical flexibility are a potential candidate for flexible electronic devices.

36 MATERIALS SCIENCE↗

Charge transport of ultrathin CoPc films on LaAlO{sub 3}(001) substrate

We have grown cobalt-phthalocyanine (CoPc) films of thickness 20nm on LaAlO{sub 3} (001) substrate using molecular beam epitaxy (MBE). The existence of natural twin boundary in LaAlO{sub 3} single crystal assist in ordering of molecule along the twin boundary direction. The ordering is confirmed by GIXRD and rocking measurement. The charge transport measurement along ordered direction shows a very high mobility of 7 cm{sup 2}V{sup -1}Sec{sup -1} at room temperature and current-voltage (J-V) characteristics can be described by trap free space charge limited conduction (SCLC). In contrast conductivity, measured across the ordered direction, is four orders lower as compared to the conductivity, along the ordered direction. The low conductivity is attributed to the traps at the grain boundary between two ordered regions. The J-V characteristics, measured across the ordered direction, can easily be described by trap controlled space charge limited conduction.

36 MATERIALS SCIENCE↗

Mechanism of Charge Transport in Cobalt and Iron Phthalocyanine Thin Films Grown by Molecular Beam Epitaxy

Cobalt phthalocyanine (CoPc), iron phthalocyanine (FePc) and their composite (CoPc-FePc) films have been grown by molecular beam epitaxy (MBE). Grazing incidence X-ray diffraction (GIXRD) and scanning electron microscope (SEM) studies showed that composite films has better structural ordering compared to individual CoPc and FePc films. The temperature dependence of resistivity (in the temperature range 25 K- 100 K) showed that composite films are metallic, while individual CoPc and FePc films are in the critical regime of metal-to-insulator (M-I) transition The composite films show very high mobility of 110 cm{sup 2} V{sup -1} s{sup -1} at room temperature i.e. nearly two order of magnitude higher compared to pure CoPc and FePc films.

36 MATERIALS SCIENCE↗

Holographic quantum critical transport without self-duality

We describe general features of frequency-dependent charge transport near strongly interacting quantum critical points in 2+1 dimensions. The simplest description using the AdS/CFT correspondence leads to a self-dual Einstein-Maxwell theory on AdS{sub 4}, which fixes the conductivity at a frequency-independent self-dual value. We describe the general structure of higher-derivative corrections to the Einstein-Maxwell theory, and compute their implications for the frequency dependence of the quantum critical conductivity. We show that physical consistency conditions on the higher-derivative terms allow only a limited frequency dependence in the conductivity. The frequency dependence is amenable to a physical interpretation using transport of either particlelike or vortexlike excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical And Positron Study Of The Interface Of Organic Semiconductor Heterojunction

Single layer of CoPc, F{sub 16}CuPc and heterostructure of CoPc/F{sub 16}CuPc were prepared by thermal evaporation system. Charge transport measurement across the interface shows a two order higher free carrier density than that of the single layer device. This confirms a charge accumulation layer at the interface which may arise due to charge transfer from CoPc layer to F{sub 16}CuPc. Slow positron study also shows a sharp S-parameter profile at the interface which is a convoluted effect of defects arising due to the growth behavior of different type of organic molecules and the intrinsic electric field due to interfacial dipole at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transport Characteristics Of Cobalt Phthalocyanine Thin Films Grown By Molecular Beam Epitaxy

In the recent times organic semiconductors (OSC) have received attention because of their application in low-cost, flexible, and large area electronics devices. The application of OSC thin films has been limited due to their low charge carrier mobility ({approx}0.1 cm{sup 2}/V-s). We have investigated the effect of substrate on structure and charge transport characteristics of cobalt phthalocyanine (CoPc) films. Thin films have been grown on both single crystal (sapphire and LaAlO{sub 3}) and amorphous (quartz) substrates using molecular beam epitaxy system. The films grown on LaAlO{sub 3} substrates exhibited a higher value of mobility ({approx}4 cm{sup 2}/V-s) while those grown on Al{sub 2}O{sub 3} and quartz showed mobility value of {approx}1 cm{sup 2}/V-s. High mobility for LaAlO{sub 3} substrates has been attributed to the enhanced ordering of the molecules due to natural twin boundaries of substrates. In order to further confirm role of grain boundaries in aligning the CoPc molecules, we measured the charge transport on films deposited at bi-crystal SrTiO{sub 3} substrates. The results showed that current along bi-crystal grain boundary is three orders of magnitude higher than for films on SrTiO{sub 3} substrate without grain boundary, which confirms our hypothesis of ordering of molecules along grain boundaries.

36 MATERIALS SCIENCE↗

Molecular Beam Epitaxy Growth of Iron Phthalocyanine Nanostructures

FePc films of different thickness have been deposited by molecular beam epitaxy (MBE) as a function of substrate temperature (25-300 deg. C) and deposition rate (0.02-0.07 nm/s). The morphology of a 60 nm alpha-phase film has been tuned from nanobrush (nearly parallel nanorods aligned normal to the substrate plane) to nanoweb (nanowires forming a web-like structure in the plane of the substrate) by changing the deposition rate from 0.02 to 0.07 nm/s. We propose growth mechanisms of nanoweb and nanobrush morphology based on the van der Waals (vdW) epitaxy. For air exposed FePc films I-V hysteresis was observed at 300 K and it is attributed to surface traps created by chemisorbed oxygen.

36 MATERIALS SCIENCE↗