Engineering topics

Siochi, Emilie J.

Publications and source records attributed to Siochi, Emilie J..

83 records · Page 5

NASA NTRS2003

Design and Characterization of Carbon Nanotube Nanocomposites

Revolutionary design concepts in future aerospace vehicles will depend on extraordinary material properties to permit significant reduction of mass and size of components, while imparting intelligence. Due to their combination of remarkable electrical and mechanical properties, carbon nanotubes (CNT) are expected to enable this paradigm shift in design concepts. However, significant challenges still exist in translating these CNT properties into the macrostructures required for future generations of aerospace vehicles. While an accepted route for making the leap from nanostructures to useful macrostructures has not been fully charted, this paper will give an overview of the approach taken by some researchers at NASA Langley Research Center to sort out issues involved in the development of CNT nanocomposites for multifunctional structures. Specifically, the dispersion of carbon nanotubes in polymer matrices, characterization of nanocomposites, the role of quantum computation in providing guidance for processing and the use of computational analysis in data interpretation will be covered. Significant improvements in mechanical and electrical properties of CNT nanocomposites with very low loadings of CNTs are described and lend credence to the potential for using CNTs in achieving technological leaps in composite development.

Siochi, Emilie J.↗

NASA NTRS2003

Electrospun Electroactive Polymers for Aerospace Applications

Electrospun piezoelectric polymers are being developed for use as a component on lightweight wings for micro-air vehicles (MAV). The goal is to incorporate fibers with tailored properties to permit dynamic control and maneuverability during flight. In particular, electrospun fiber mats of two piezoelectric polymers were investigated to ascertain their potential for the MAV application. In the work reported here, the typical experimental set-up for electrospinning was modified to induce fiber orientation in the spun mats. The morphologies of the resulting fibers and fiber mats were evaluated for various experimental conditions, and a comparison between oriented and unoriented fiber mats was carried out.

Pawlowski, Kristin J.↗

NASA NTRS2002

Imaging Carbon Nanotubes in High Performance Polymer Composites via Magnetic Force Microscope

Application of carbon nanotubes as reinforcement in structural composites is dependent on the efficient dispersion of the nanotubes in a high performance polymer matrix. The characterization of such dispersion is limited by the lack of available tools to visualize the quality of the matrix/carbon nanotube interaction. The work reported herein demonstrates the use of magnetic force microscopy (MFM) as a promising technique for characterizing the dispersion of nanotubes in a high performance polymer matrix.

Lillehei, Peter T.↗

NASA NTRS2002

Dispersion of Single Wall Carbon Nanotubes by in situ Polymerization Under Sonication

Single wall nanotube reinforced polyimide nanocomposites were synthesized by in situ polymerization of monomers of interest in the presence of sonication. This process enabled uniform dispersion of single wall carbon nanotube (SWNT) bundles in the polymer matrix. The resultant SWNT-polyimide nanocomposite films were electrically conductive (antistatic) and optically transparent with significant conductivity enhancement (10 orders of magnitude) at a very low loading (0.1 vol%). Mechanical properties as well as thermal stability were also improved with the incorporation of the SWNT.

Park, Cheol↗

NASA NTRS2002

Biomimetics for NASA Langley Research Center: Year 2000 Report of Findings From a Six-Month Survey

This report represents an attempt to see if some of the techniques biological systems use to maximize their efficiency can be applied to the problems NASA faces in aeronautics and space exploration. It includes an internal survey of resources available at NASA Langley Research Center for biomimetics research efforts, an external survey of state of the art in biomimetics covering the Materials, Structures, Aerodynamics, Guidance and Controls areas. The Biomimetics Planning team also included ideas for potential research areas, as well as recommendations on how to implement this new program. This six-month survey was conducted in the second half of 1999.

Siochi, Emilie J.↗

NASA NTRS2002

Recent Results from NASA's Morphing Project

The NASA Morphing Project seeks to develop and assess advanced technologies and integrated component concepts to enable efficient, multi-point adaptability in air and space vehicles. In the context of the project, the word "morphing" is defined as "efficient, multi-point adaptability" and may include macro, micro, structural and/or fluidic approaches. The project includes research on smart materials, adaptive structures, micro flow control, biomimetic concepts, optimization and controls. This paper presents an updated overview of the content of the Morphing Project including highlights of recent research results.

McGowan, Anna-Maria R.↗

NASA NTRS1998

Stability of Poly(amide acid) Solutions

Aging characteristics of four poly(amide acid) solutions were followed using gel permeation chromatography. NASA LaRC(Tm) PETI-5 was found to be the most stable over a period of about 270 days.

Siochi, Emilie J.↗

NASA NTRS1995

LDEF polymeric materials: A summary of Langley characterization

The NASA Long Duration Exposure Facility (LDEF) enabled the exposure of a wide variety of materials to the low earth orbit (LEO) environment. This paper provides a summary of research conducted at the Langley Research Center into the response of selected LDEF polymers to this environment. Materials examined include graphite fiber reinforced epoxy, polysulfone, and additional polyimide matrix composites, films of FEP Teflon, Kapton, several experimental high performance polyimides, and films of more traditional polymers such as poly(vinyl toluene) and polystyrene. Exposure duration was either 10 months or 5.8 years. Flight and control specimens were characterized by a number of analytical techniques including ultraviolet-visible and infrared spectroscopy, thermal analysis, scanning electron and scanning tunneling microscopy, x-ray photoelectron spectroscopy, and, in some instances, selected solution property measurements. Characterized effects were found to be primarily surface phenomena. These effects included atomic oxygen-induced erosion of unprotected surfaces and ultraviolet-induced discoloration and changes in selected molecular level parameters. No gross changes in molecular structure or glass transition temperature were noted. The intent of this characterization is to increase our fundamental knowledge of space environmental effects as an aid in developing new and improved polymers for space application. A secondary objective is to develop benchmarks to enhance our methodology for the ground-based simulation of environmental effects so that polymer performance in space can be more reliably predicted.

Young, Philip R.↗

NASA NTRS1994

The effect of Low Earth Orbit exposure on some experimental fluorine and silicon-containing polymers

Several experimental fluorine and silicon-containing polymers in film form were exposed to low Earth orbit (LEO) on a Space Shuttle flight experiment (STS-46, Evaluation of Oxygen Interaction with Materials, EOIM-3). The environmental parameters of primary concern were atomic oxygen (AO) and ultraviolet (UV) radiation. The materials were exposed to 2.3 plus or minus 0.1 x 10(exp 20) oxygen atoms/sq cm and 30.6 UV sun hours during the flight. In some cases, the samples were exposed at ambient, 120 C and 200 C. The effects of exposure on these materials were assessed utilizing a variety of characterization techniques including optical, scanning electron (SEM) and scanning tunneling (STM) microscopy, UV-visible (UV-VIS) transmission, diffuse reflectance infrared (DR-FTIR), x-ray photoelectron (XPS) spectroscopy, and in a few cases, gel permeation chromatography (GPC). In addition, weight losses of the films, presumably due to AO erosion, were measured. The fluorine-containing polymers exhibited significant AO erosion and exposed films were diffuse or 'frosted' in appearance and consequently displayed dramatic reductions in optical transmission. The silicon-containing films exhibited minimum AO erosion and the optical transmission of exposed films was essentially unchanged. The silicon near the exposed surface in the films was converted to silicate/silicon oxide upon AO exposure which subsequently provided protection for the underlying material. The silicon-containing epoxies are potentially useful as AO resistant coatings and matrix resins as they are readily processed into carbon fiber reinforced composites and cured via electron radiation.

Connell, John W.↗

NASA NTRS1992

Isothermal aging of IM7/8320 and IM7/5260

Isothermal aging was conducted on two composite systems being considered as possible candidates for the next generation supersonic transport. The composite systems were IM7/5260, a carbon/thermoset, and IM7/8320, a carbon/amorphous thermoplastic. The materials were isothermally aged for a total of 5000 hours at 125 C and 175 C. These temperatures are approximately equivalent to the upper skin temperatures of an aircraft flying at Mach 2.0 and Mach 2.4, respectively. The variations of the following properties were determined as a function of aging time: weight loss, moduli, glass transition temperature, microcracking, and modulus and strength of a +/- 45 laminate. The difficulties and accuracy of strain measurements are also discussed.

Martin, Roderick H.↗

NASA NTRS1992

Analysis of a space-exposed thermoplastic resin

The chemical characterization of a thermoplastic resin exposed to the low Earth orbit (LEO) environment for 10 months and for 5.8 years is reported. The resin, processed as a thick film and as a matrix for a graphite fiber reinforced composite, few exposed in the RAM direction on the NASA Long Duration Exposure Facility (LDEF). Differences attributable to environmental exposure were detected in infrared spectra and in various molecular weight parameters of film after 10 months in LEO. Those effects were not as apparent in composites after 5.8 years in LEO. Increased exposure to atomic oxygen toward the end of the LDEF mission probably scrubbed these effects from specimens exposed for 5.8 years. The intent of this study is to increase our fundamental understanding of space environmental effects on polymeric materials and to develop a benchmark for enhancing our methodology for and understanding of the ground-based simulation of space environmental effects.

Young, Philip R.↗