Influence of microstructure and phase morphology on the stability of high temperature irradiation resistant thermocouples
Not Available
Riley, Scott (ORCID:000000027498065X)↗
Engineering topics
Skifton, Richard
Publications and source records attributed to Skifton, Richard.
High-temperature irradiation-resistant thermocouple instability model for in-pile reactor use
This article presents an instability model for the high-temperature irradiation-resistant thermocouple (HTIR-TC). Here the term instability defines the superposition of both drift and inhomogeneity of TC thermoelements occurring simultaneously. The HTIR-TC is an advanced thermocouple (TC) that uses the refractory metals niobium and molybdenum as sensing thermoelements for generating electromotive force (EMF) in a field of neutrons and at temperatures upward of 1,600°C. In the Advanced Gas Reactor (AGR) 5/6/7 tests conducted at Idaho National Laboratory’s Advanced Test Reactor (ATR), the HTIR-TCs showed low to moderate instability throughout the life of the test. The instability model reveals that HTIR-TCs can, when the operating temperature of the reactor fuel is normal, maintain performance throughout an 18-month refueling cycle typical of nuclear power plants, reflecting an instability of less than ±1%. The HTIR-TC is also qualified for incorporation into a test fixture during the testing of new fuels.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Integration Testing of Ultrasonic Deformation Sensor for TREAT Experiments
Fuel deformation (both axial and radial) information provides insights into fuel performance and failure limits. Traditionally, fuel deformation has been quantified using post-irradiation examinations due to the lack of an appropriate sensor for monitoring deformation in situ. Recent developments in sensor and instrumentation design have led to the use of linear variable differential transformers (LVDT) for monitoring axial strain in fuel during irradiation. Size and operational constraints limit the use of LVDT sensors for radial deformation monitoring, and alternatives are needed. One possible alternative to LVDT sensors is an ultrasonic sensor. Ultrasonic sensors monitor the interaction of high-frequency stress waves with the test object. The resulting response may be analyzed to determine the properties of the material, including stress, strain, microstructure, presence of defects, and the elastic constants. While ultrasonic measurements have been successfully applied for monitoring strain in a number of applications, their use for in-core measurements has been limited. Largely, the limitations are due to the challenges associated with designing sensors that can operate under typical in-core conditions. This report documents testing performed to confirm that the prototypic ultrasonic deformation sensor can be integrated into TREAT irradiation experiments using the SETH capsule.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
HOT R&D100
Explore the source record for details and available documents.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
HOT video presentation
Explore the source record for details and available documents.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗