Engineering topics
Publications and source records attributed to Skoog, Mark A..
This presentation and companion paper discuss the four critical concepts required for using the ASTM industry standard towards the certification of a highly autonomous aircraft.
This paper expands upon the ASTM industry standard F3269-17 to outline a run-time assurance (RTA) network architecture for use in ensuring safe flight operations of a highly autonomous aircraft. An RTA network architecture is proposed and critical features discussed to implement functions where automation is primarily responsible for the safety of the aircraft instead of a pilot. This shift in responsibility, made possible by the proposed architecture, is key to highly resilient automation and is a core enabler for future “pilotless” transportation concepts. The findings in this paper stem from the researcher’s experiences with ASTM in the generation of the standard and some seven years of RTA system development on various flight programs leveraging the RTA concepts outlined in the ASTM standard.
This describes a method that could enable the civil use of autonomous aircraft in mission such as airborne package delivery. Establishing such a method greatly strengthens U.S. technology position.
This presentation discusses key accomplishments of the MM-RTA project.
This poster addresses a multi-monitor RTA approach to safety bound behavior.
No abstract available
This presentation discusses the FAA belief that this research may hold the key to enabling safe autonomous operation of vehicles.
Part 23 aircraft operation, and in particular general aviation, is relatively unsafe when compared to other common forms of vehicle travel. Currently, there exists technologies that could increase safety statistics for these aircraft; however, the high burden and cost of performing the requisite safety critical certification processes for these systems limits their proliferation. For this reason, many entities, including the Federal Aviation Administration, NASA, and the US Air Force, are considering new options for certification for technologies that will improve aircraft safety. Of particular interest, are low cost autopilot systems for general aviation aircraft, as these systems have the potential to positively and significantly affect safety statistics. This paper proposes new systems and techniques, leveraging run-time verification, for the assurance of general aviation autopilot systems, which would be used to supplement the current certification process and provide a viable path for near-term low-cost implementation. In addition, discussions on preliminary experimentation and building the assurance case for a system, based on these principles, is provided.
NASAs Armstrong Flight Research Center has been engaged in the development of highly automatic safety systems for aviation since the mid 80s. For the past three years under Seedling and Center Innovation funding this work has moved toward the development of a software architecture applicable to autonomous safety. This work is now broadening and accelerating to address the airworthiness issues surrounding making a case for trustworthy autonomy. This software architecture is called the expandable variable-autonomy architecture (EVAA) and utilizes a run-time assurance approach to safety assurance.
This slide presentation reviews the work of the Flight testing Automatic Collision Avoidance Technology/Fighter Risk Reduction Project (ACAT/FRRP). The goal of this project is to develop common modular architecture for all aircraft, and to enable the transition of technology from research to production as soon as possible to begin to reduce the rate of mishaps. The automated Ground Collision Avoidance System (GCAS) system is designed to prevent collision with the ground, by avionics that project the future trajectory over digital terrain, and request an evasion maneuver at the last instance. The flight controls are capable of automatically performing a recovery. The collision avoidance is described in the presentation. Also included in the presentation is a description of the flight test.
This document represents two views of the Automatic Collision Avoidance Technology (ACAT). One viewgraph presentation reviews the development and system design of Automatic Collision Avoidance Technology (ACAT). Two types of ACAT exist: Automatic Ground Collision Avoidance (AGCAS) and Automatic Air Collision Avoidance (AACAS). The AGCAS Uses Digital Terrain Elevation Data (DTED) for mapping functions, and uses Navigation data to place aircraft on map. It then scans DTED in front of and around aircraft and uses future aircraft trajectory (5g) to provide automatic flyup maneuver when required. The AACAS uses data link to determine position and closing rate. It contains several canned maneuvers to avoid collision. Automatic maneuvers can occur at last instant and both aircraft maneuver when using data link. The system can use sensor in place of data link. The second viewgraph presentation reviews the development of a flight test and an evaluation of the test. A review of the operation and comparison of the AGCAS and a pilot's performance are given. The same review is given for the AACAS is given.
Briefing charts from presentation on the Automatic Air Collision Avoidance System(Auto-ACAS).