Search NASA⌕ Search

Engineering topics

Skoropata, Elizabeth

Publications and source records attributed to Skoropata, Elizabeth.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hole doping in compositionally complex correlated oxide enables tunable exchange biasing

Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO 3 perovskite oxide La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing Magnetism in High Entropy Oxides

Abstract In magnetic systems, spin and exchange disorder can provide access to quantum criticality, frustration, and spin dynamics, but broad tunability of these responses and a deeper understanding of strong limit disorder are lacking. Here, it is demonstrated that high entropy oxides present a previously unexplored route to designing materials in which the presence of strong local compositional disorder may be exploited to generate tunable magnetic behaviors—from macroscopically ordered states to frustration‐driven dynamic spin interactions. Single‐crystal La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 films are used as a model system hosting a magnetic sublattice with a high degree of microstate disorder in the form of site‐to‐site spin and exchange type inhomogeneity. A classical Heisenberg model simplified to represent the highest probability microstates well describes how compositionally disordered systems can paradoxically host magnetic uniformity and demonstrates a path toward continuous control over ordering types and critical temperatures. Model‐predicted materials are synthesized and found to possess an incipient quantum critical point when magnetic ordering types are designed to be in direct competition, this leads to highly controllable exchange bias behaviors previously accessible only in intentionally designed bilayer heterojunctions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetism dynamics driven by phase separation in Pr-doped manganite thin films: A ferromagnetic resonance study

In this work, we performed ferromagnetic resonance measurements of a (La 1–x Pr x ) 1–y Ca y MnO 3–δ with x = 0.52 ± 0.05, y = 0.23 ± 0.04, and δ = 0.14 ± 0.10 thin single crystalline film which, in combination with micromagnetic simulations, reveal three temperature regions consistent with (i) a ferromagnetic-paramagnetic transition in which ferromagnetic domains nucleate and grow, (ii) followed by a filamentary fluidlike percolation of magnetic domains exhibiting dynamic processes and finally, iii) the existence of a blocking temperature below which the magnetism is a metastable glassy-like state with strong decoherence of the uniform resonance mode. Our results suggest a strain-liquid to strain-glass spin order transition in which the magnetism and fluidlike dynamics of the separated phases freeze at low temperatures. We show the magnetism dynamics depend strongly on the phase-separated state and morphology of the magnetic domains suggesting a route to control of phase separation and realization of spintronic and magnonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Extremely large magnetoresistance in high-mobility SrNbO 3 /SrTiO 3 heterostructures

In this report an extremely large linear magnetoresistance (LMR) is a ubiquitous phenomenon emerging from topological Dirac and Weyl semimetals. However, the connection between an LMR and a nontrivial topology is under extensive debate. In this paper, by precisely controlling the thickness of SrNbO 3 thin films grown on SrTiO 3 substrates, we observe an LMR over a large carrier density range with a magnetoresistance as high as 150000% at a carrier density n~10 21 cm -3 , far away from the quantum-limit regime. The temperature-, magnetic-field-, and carrier-density-dependent LMR in SrNbO 3 /SrTiO 3 heterostructures provides compelling evidence of a mobility-driven LMR in coherent electronic systems. Our results uncover the general principle of an LMR and shed light on proper categorization of transport properties in topological and correlated materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Charge doping effects on magnetic properties of single-crystal La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 (0 ≤ x ≤ 0.5) high-entropy perovskite oxides

The observed influence of hole doping on magnetic properties is mapped for the compositionally complex high-entropy oxide ABO 3 perovskite La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 (0 ≤ x ≤ 0.5). It is found that aliovalent A -site substitution is a viable means to manipulate the magnetically active B -site sublattice. A series of single-crystal films are synthesized and show a general trend toward stronger ferromagnetic response and a shift in magnetic anisotropy as the Sr concentration increases. Magnetometry demonstrates complex and nonuniform responses similar to rigid and uncoupled composites at intermediate dopings. This behavior points to the presence of locally inhomogeneous magnetic phase competition, where ferromagnetic and antiferromagnetic magnetic contributions create a frustrated matrix containing uncompensated spins at the boundaries between these regions. The observations are discussed in the context of known responses to hole doping in the less complex ternary LaT M O 3 (T M =Cr,Mn,Fe,Co,Ni) oxides, and they are found to be different from a simple sum of the doped parents. The results are summarized in a preliminary magnetic phase diagram.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Correlated oxide Dirac semimetal in the extreme quantum limit

Quantum materials (QMs) with strong correlation and nontrivial topology are indispensable to next-generation information and computing technologies. Exploitation of topological band structure is an ideal starting point to realize correlated topological QMs. Here, we report that strain-induced symmetry modification in correlated oxide SrNbO 3 thin films creates an emerging topological band structure. Dirac electrons in strained SrNbO 3 films reveal ultrahigh mobility (μ max ≈ 100,000 cm 2 /Vs), exceptionally small effective mass (m* ~ 0.04m e ), and nonzero Berry phase. Strained SrNbO 3 films reach the extreme quantum limit, exhibiting a sign of fractional occupation of Landau levels and giant mass enhancement. Our results suggest that symmetry-modified SrNbO 3 is a rare example of correlated oxide Dirac semimetals, in which strong correlation of Dirac electrons leads to the realization of a novel correlated topological QM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effective reduction of PdCoO 2 thin films via hydrogenation and sign tunable anomalous Hall effect

PdCoO 2 , belonging to a family of triangular oxides called delafossite, is one of the most conducting oxides. Its in-plane conductivity is comparable to those of the best metals and exhibits hydrodynamic electronic transport with an extremely long mean free path at cryogenic temperatures. Nonetheless, it is nonmagnetic despite the presence of the cobalt ion. In this work, we show that a mild hydrogenation process reduces PdCoO 2 thin films to an atomically mixed alloy of PdCo with strong out-of-plane ferromagnetism and sign-tunable anomalous Hall effect. Considering that many other compounds remain little affected under a similar hydrogenation condition, this discovery may provide a route to creating novel spintronic heterostructures combining strong ferromagnetism, involving oxides and other functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next-generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators that can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling, which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single-crystal (Mg 0.2 Ni 0.2 Fe 0.2 Co 0.2 Cu 0.2 )Fe 2 O 4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Furthermore, local and global magnetic measurements further demonstrate how strain can be used to manipulate the magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next-generation magnetic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Epitaxial Stabilization of Single-Crystal Multiferroic YCrO 3 Thin Films

We report on the growth of stoichiometric, single-crystal YCrO 3 epitaxial thin films on (001) SrTiO 3 substrates using pulsed laser deposition. X-ray diffraction and atomic force microscopy reveal that the films grew in a layer-by-layer fashion with excellent crystallinity and atomically smooth surfaces. Magnetization measurements demonstrate that the material is ferromagnetic below 144 K. The temperature dependence of dielectric permittivity shows a characteristic relaxor-ferroelectric behavior at T C = 375–408 K. A dielectric anomaly at the magnetic transition temperature indicates a close correlation between magnetic and electric order parameters in these multiferroic YCrO 3 films. These findings provide guidance to synthesize rare-earth, chromite-based multifunctional heterostructures and build a foundation for future studies on the understanding of magnetoelectric effects in similar material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Interfacial tuning of chiral magnetic interactions for large topological Hall effects in LaMnO 3 /SrIrO 3 heterostructures

Chiral interactions in magnetic systems can give rise to rich physics manifested, for example, as nontrivial spin textures. The foremost interaction responsible for chiral magnetism is the Dzyaloshinskii-Moriya interaction (DMI), resulting from inversion symmetry breaking in the presence of strong spin-orbit coupling. However, the atomistic origin of DMIs and their relationship to emergent electrodynamic phenomena, such as topological Hall effect (THE), remain unclear. Here, we investigate the role of interfacial DMIs in 3 d –5 d transition metal-oxide-based LaMnO 3 /SrIrO 3 superlattices on THE from a chiral spin texture. By additively engineering the interfacial inversion symmetry with atomic-scale precision, we directly link the competition between interfacial collinear ferromagnetic interactions and DMIs to an enhanced THE. The ability to control the DMI and resulting THE points to a pathway for harnessing interfacial structures to maximize the density of chiral spin textures useful for developing high-density information storage and quantum magnets for quantum information science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unexpected crystalline homogeneity from the disordered bond network in La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 films

Designing and understanding functional electronic and magnetic properties in perovskite oxides requires controlling and tuning the underlying crystal lattice. In this work, we report the structure, including oxygen and cation positions, of a single-crystal, entropy stabilized perovskite oxide film of La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 grown on SrTiO3 (001). The parent materials range from orthorhombic (LaCrO 3 , LaMnO 3 , and LaFeO 3 ) to rhombohedral (LaCoO 3 and LaNiO 3 ), and first principles calculations indicate that these structural motifs are nearly degenerate in energy and should be highly distorted site to site. Despite this extraordinary local configurational disorder on the B-site sublattice, we find a structure with unexpected macroscopic crystalline homogeneity with a clear orthorhombic unit cell, whose orientation is demonstrated to be controlled by the strain and crystal structure of the substrate for films grown on (La 0.3 Sr 0.7 )(Al 0.65 Ta 0.35 )O 3 and NdGaO 3 (110). Furthermore, quantification of the atom positions within the unit cell reveals that the orthorhombic distortions are small, close to LaCrO 3, which may be driven by a combination of disorder averaging and the average ionic radii. This is a step toward understanding the rules for designing crystal motifs and tuning functional properties through controlled configurational complexity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pulsed-laser epitaxy of metallic delafossite PdCrO 2 films

Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO 2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of delafossites may enable not only the tuning of the basic physical properties beyond what bulk materials can exhibit, but also the development of novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO 2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinity, the direct growth of epitaxial PdCrO 2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities with the substrate and volatile nature of the PdO sublayer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO 2 buffer layers before PdCrO 2 films were grown. Unlike PdCrO 2 , CuCrO 2 films were readily grown with a relatively wide growth window. Only a monolayer thick buffer layer was sufficient to grow the correct PdCrO 2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness. This work provides key insights into advancing the epitaxial growth of the broader class of metallic delafossites for both studying the basic physical properties and developing new spintronic and computing devices.

36 MATERIALS SCIENCE↗