Search NASA⌕ Search

Engineering topics

Smaha, Rebecca W.

Publications and source records attributed to Smaha, Rebecca W..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Co 3 Ga 2 Ge 5 : Probing site mixing of the Ru 3 Sn 7 structure type with elements difficult to distinguish by diffraction

Co 3 Ga 2 Ge 5 was synthesized through arc-melting stoichiometric ratios of the elements, and a Ru 3 Sn 7 -type structure was confirmed by X-ray diffraction. Because Co 3 Ga 2 Ge 5 contains Ga and Ge, which have very similar X-ray and neutron scattering factors, any Ga/Ge crystallographic site preference cannot be determined with diffraction alone. The purpose of this study is to highlight the importance of using multiple techniques to characterize otherwise structurally ambiguous intermetallic compounds. Here, we utilize 71 Ga nuclear magnetic resonance spectroscopy and an analysis of the X-ray absorption fine structure to clarify the amount of Ga/Ge site mixing. Our combined use of X-ray diffraction and spectroscopy provides a comprehensive structural analysis of Ga site mixing across the Ge crystallographic sites, enhancing the understanding of the structure and properties of Co 3 Ga 2 Ge 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

GdWN 3 is a nitride perovskite

Nitride perovskites ABN3 are an emerging and highly underexplored class of materials that are of interest due to their intriguing calculated ferroelectric, optoelectronic, and other functional properties. Incorporating novel A-site cations is one strategy to tune and expand such properties; for example, Gd 3+ is compelling due to its large magnetic moment, potentially leading to multiferroic behavior. However, the theoretically predicted ground state of GdWN 3 was a non-perovskite monoclinic structure. Here, we experimentally show that GdWN 3-y crystallizes in a perovskite structure. High-throughput combinatorial sputtering with activated nitrogen is employed to synthesize thin films of Gd 2-x W x N 3-y O y with oxygen content y < 0.05. Ex situ annealing crystallizes a polycrystalline perovskite phase in a narrow composition window near x = 1. LeBail fits of synchrotron grazing incidence wide angle x-ray scattering data are consistent with a perovskite ground-state structure. Refined density functional theory calculations that included antiferromagnetic configurations confirm that the ground-state structure of GdWN 3 is a distorted Pnma perovskite with antiferromagnetic ordering, in contrast to prior predictions. Initial property measurements find that GdWN 3-y is paramagnetic down to T = 2 K with antiferromagnetic correlations and that the absorption onset depends on cation stoichiometry. This work provides an important path toward both the rapid expansion of the emerging family of nitride perovskites and understanding their potential multiferroic properties.

14 SOLAR ENERGY↗
DOE OSTI2024

Synthesis pathways to thin films of stable layered nitrides

Controlled synthesis of metastable materials away from equilibrium is of interest in materials chemistry. Thin-film deposition methods with rapid condensation of vapour precursors can readily synthesize metastable phases but often struggle to yield the thermodynamic ground state. Growing thermodynamically stable structures using kinetically limited synthesis methods is important for practical applications in electronics and energy conversion. Here, in this study, we reveal a synthesis pathway to thermodynamically stable, ordered layered ternary nitride materials, and discuss why disordered metastable intermediate phases tend to form. We show that starting from elemental vapour precursors leads to a 3D long-range-disordered MgMoN 2 thin-film metastable intermediate structure, with a layered short-range order that has a low-energy transformation barrier to the layered 2D-like stable structure. This synthesis approach is extended to ScTaN 2 , MgWN 2 and MgTa 2 N 3 , and may lead to the synthesis of other layered nitride thin films with unique semiconducting and quantum properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

“Mn 3 AlN” is Really Mn 4 N

We investigate the synthesis of antiperovskite “Mn 3 AlN” using the published synthesis procedure, as well as several new reaction pathways. In each case, only a combination of antiperovskite Mn 4 N and Mn 5 Al 8 or precursors is obtained. The identity of the obtained antiperovskite phase is unambiguously determined to be Mn4N via synchrotron powder X-ray diffraction (SPXRD), X-ray absorption spectroscopy (XAS), and magnetometry. The experimental results are further supported by thermochemical calculations informed by density functional theory (DFT), which find Mn 3 AlN to be metastable versus decomposition into Mn and AlN. The DFT-based calculations also predict an antiferromagnetic ground state for Mn3AlN. This directly contradicts the previously reported ferromagnetic behavior of "Mn 3 AlN". Instead, the observed magnetic behavior is consistent with ferrimagnetic Mn 4 N. We examine the data in the original publication and conclude that the compound reported to be Mn 3 AlN is in fact Mn 4 N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors [Slides]

Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are "critical" (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L10 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs?

42 ENGINEERING↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors

Abstract Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are “critical” (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L1 0 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs? Graphical abstract

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Defect control strategies for Al 1- x Gd x N alloys

Tetrahedrally bonded III-N and related alloys are useful for a wide range of applications from optoelectronics to dielectric electromechanics. Heterostructural AlN-based alloys offer unique properties for piezoelectrics, ferroelectrics, and other emerging applications. Atomic-scale point defects and impurities can strongly affect the functional properties of materials, and therefore, it is crucial to understand the nature of these defects and the mechanisms through which their concentrations may be controlled in AlN-based alloys. In this study, we employ density functional theory with alloy modeling and point defect calculations to investigate native point defects and unintentional impurities in Al 1-x Gd x N alloys. Among the native defects that introduce deep midgap states, nitrogen vacancies (V N ⁠) are predicted to be in the highest concentration, especially under N-poor growth conditions. We predict and experimentally demonstrate that V N formation can be suppressed in thin films through growth in N-rich environments. We also find that Al 1-x Gd x N alloys are prone to high levels of unintentional O incorporation, which indirectly leads to even higher concentrations of deep defects. Growth under N-rich/reducing conditions is predicted to minimize and partially alleviate the effects of O incorporation. The results of this study provide valuable insights into the defect behavior in wurtzite nitride-based alloys, which can guide their design and optimization for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local probe investigation of the spin dynamics in the kagome and interlayers of orthorhombic barlowite $\mathrm{Cu4(OD)_6FBr; ^{79}Br}$ and $\mathrm{^{63}Cu}$ NQR study

Here we report 79 Br and 63 Cu nuclear quadrupole resonance (NQR) in the paramagnetic state above T N =15 K of the antiferromagnetic orthorhombic phase of barlowite Cu 4 (OD) 6 FBr consisting of a layered kagome structure. The divergent behavior of the longitudinal 79 (1/T 1 ) and transverse 79 (1/T 2 ) relaxation rates observed at 79Br sites evidences that critical slowing down of Cu spin fluctuations sets in below ~20 K. This means that one or more Cu sites, most likely at the interlayer Cu(3,4,5) sites between the kagome planes, undergo the antiferromagnetic phase transition in a fairly conventional way. On the other hand, the 63 Cu NQR signal intensity is gradually wiped out below ~30 K, pointing toward gradual spin freezing of the kagome layers instead. These contrasting findings suggest significant roles played by magnetic frustration effects within the kagome layers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Autonomous sputter synthesis of thin film nitrides with composition controlled by Bayesian optimization of optical plasma emission

Autonomous experimentation has emerged as an efficient approach to accelerate the pace of material discovery. Although instruments for autonomous synthesis have become popular in molecular and polymer science, solution processing of hybrid materials, and nanoparticles, examples of autonomous tools for physical vapor deposition are scarce yet important for the semiconductor industry. Here, we report the design and implementation of an autonomous workflow for sputter deposition of thin films with controlled composition, leveraging a highly automated sputtering reactor custom-controlled by Python, optical emission spectroscopy (OES), and a Bayesian optimization algorithm. We modeled film composition, measured by x-ray fluorescence, as a linear function of plasma emission lines monitored during co-sputtering from elemental Zn and Ti targets in an N 2 and Ar atmosphere. A Bayesian control algorithm, informed by OES, navigates the space of sputtering power to fabricate films with user-defined compositions by minimizing the absolute error between desired and measured optical emission signals. We validated our approach by autonomously fabricating Zn x Ti 1-x N y films that deviate from the targeted cation composition by a relative ±3.5%, even for 15 nm thin films, demonstrating that the proposed approach can reliably synthesize thin films with a specific composition and minimal human interference. Moreover, the proposed method can be extended to more difficult synthesis experiments where plasma intensity lines depend non-linearly on pressure, or the elemental sticking coefficients strongly depend on the substrate temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-energy spin excitations in the quantum spin liquid candidate Zn-substituted barlowite probed by resonant inelastic x-ray scattering

A quantum spin liquid is a novel ground state that can support long-range entanglement between magnetic moments, resulting in exotic spin excitations involving fractionalized $S$ = $\frac{1}{2}$ spinons. Here, we measure the excitations in single crystals of the spin liquid candidate Zn-barlowite using resonant inelastic X-ray scattering. By analyzing the incident polarization and temperature dependences, we deduce a clear magnetic scattering contribution forming a broad continuum that surprisingly extends up to ~ $200$ meV (~14$J$, where $J$ is the magnetic exchange). In conclusion, the excitation spectrum reveals that significant contributions arise from multiple pairs of spinons and/or antispinons at high energies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Emergence of the spin polarized domains in the kagome lattice Heisenberg antiferromagnet Zn-barlowite (Zn 0.95 Cu 0.05 )Cu 3 (OD) 6 FBr

Kagome lattice Heisenberg antiferromagnets are known to be highly sensitive to perturbations caused by the structural disorder. NMR is a local probe ideally suited for investigating such disorder-induced effects, but in practice, large distributions in the conventional one-dimensional NMR data make it difficult to distinguish the intrinsic behavior expected for pristine kagome quantum spin liquids from disorder-induced effects. Here we report the development of a two-dimensional NMR data acquisition scheme applied to Zn-barlowite (Zn 0.95 Cu 0.05 )Cu 3 (OD) 6 FBr kagome lattice, and successfully correlate the distribution of the low energy spin excitations with that of the local spin susceptibility. We present evidence for the gradual growth of domains with a local spin polarization induced by 5% Cu 2+ defect spins occupying the interlayer non-magnetic Zn 2+ sites. These spin-polarized domains account for ~60% of the sample volume at 2 K, where gapless excitations induced by interlayer defects dominate the low-energy sector of spin excitations within the kagome planes.

36 MATERIALS SCIENCE↗