Engineering topics
Publications and source records attributed to Smart, M..
Lithium-ion rechargeable batteries have been demonstrated to have high energy density, high voltage, and excellent cycle life which make this technology more attractive than competing systems such as Ni-Cd and Ni-H2.
In this paper, we report our studies on the evaluation of these cells under various test conditions.
None given. This is a series of viewgraphs from a visual presentation to the workshop. From outline: JPL program overview; low temperature studies; cycle life studies; destructive physical analysis (DPA) of cycled cells; prototype cell development; summary of accomplishment.
Direct methanol fuel cells for portable power applications have been advanced significantly under DARPA- and ARO-sponsored programs over the last five years. A liquid-feed, direct methanol fuel cell developed under these programs, employs a proton exchange membrane as electrolyte and operates on aqueous solutions of methanol with air or oxygen as the oxidant.
Explore the source record for details and available documents.
The objective of this program is to develop rechargeable Li-ion cells for future NASA missions. Applications that would benefit from this project are: new millenium spacecraft; rovers; landers; astronaut equipment; and planetary orbiters. The approach of this program is: select electrode materials and electrolytes; identify failure modes and mechanisms and enhance cycle life; demonstrate Li-ion cell technology with liquid electrolyte; select candidate polymer electrolytes for Li-ion polymer cells; and develop Li-ion polymer cell technology.
Carbon materials, such as graphite, cokes, pitch and PAN fibers, are being evaluated in lithium batteries as alternate anode materials with some degree of success. There is an effort to look for other non-carbon anode materials which have larger Li capacity, higher rate capability, smaller first charge capacity loss and better mechanical stability during cycling. A Li-Mg-Si material is evaluated.
Reports by the staff of the University of Queensland on various research studies related to the advancement of scramjet technology are presented. These reports document the tests conducted in the reflected shock tunnel T4 and supporting research facilities that have been used to study the injection, mixing, and combustion of hydrogen fuel in generic scramjets at flow conditions typical of hypersonic flight. In addition, topics include the development of instrumentation and measurement technology, such as combustor wall shear and stream composition in pulse facilities, and numerical studies and analyses of the scramjet combustor process and the test facility operation.
The propagation of a train of acoustic shocks guided by diverging magnetic fields through a static model of the solar chromospheric network and transition region is investigated. For initial flux densities of 1,000,000 ergs/sq cm/sec in the lower chromosphere, the local efficiency of acoustic transmission into the corona can be much higher than that calculated for a plane parallel atmosphere. Acoustic energy will tend to be deposited at higher chromospheric levels in diverging magnetic fields, and magnetic guiding may influence the temperature profile of the network and plages. The total flux that can be transmitted into the corona along such diverging fields is severely limited since the magnetic elements occupy a small fractional area of the photosphere and the transmission efficiency is a rapidly decreasing function of initial flux density. Diverging magnetic fields and a varying ratio of specific heats are not likely to allow high frequency shocks to dissipate high enough in a static atmosphere to contribute significantly to the coronal energy balance.