Reversible Electrochemical Anionic Redox in Rechargeable Multivalent-Ion Batteries
Not provided.
Chemistry↗
Engineering topics
Smeu, Manuel
Publications and source records attributed to Smeu, Manuel.
Electron passivation in CaF 2 on calcium metal anodes
Current electrolytes in calcium-ion batteries suffer from a lack of stability and degradation caused by reduction from the anode. The solid-electrolyte interphase (SEI) that forms on the anodes during operation stems the flow of electrons from the anode to the electrolyte. CaF 2 is a common inorganic compound found in the SEI, and is derived from electrolyte salts such as Ca(PF 6 ) 2 . CaF 2 can exist in crystalline, polycrystalline, and amorphous phases in the SEI, and as recent work has shown, different phases of the same compound can have vastly different electronic conductivities. Using the non-equilibrium Green's function technique with density functional theory (NEGF-DFT), we find that amorphous phase systems enhance electron tunneling in thin CaF 2 films by 1–2 orders of magnitude when compared to crystalline and polycrystalline CaF 2 systems. Transport through several amorphous structures was considered showing that, despite their random structures, their conductance properties are similar. Finally, through analysis of the decay constant β and the low-bias conductance of each system, we show that crystalline and polycrystalline CaF 2 offer greater protection of the electrolyte than amorphous CaF 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Reaction Mechanism of Na-Ion Deintercalation in Na[subscript 2]CoSiO[subscript 4]
Explore the source record for details and available documents.
Wang, Jiwei↗
2D Ni 0.25 Mn 0.75 O 2 : A high-performance cathode for multivalent ion batteries
Although Li-ion batteries have driven portable energy storage in recent decades, there is increasing concern about their safety, cost, and abundance of constituents. Multivalent ion batteries (MVIBs) have the potential to remedy these issues, but they are limited by the currently known MVIB cathodes, which fail to deliver unanimously favorable voltage, energy density, and diffusion kinetics. Here we used density functional theory (DFT) to model the performance of Li, Na, Mg, Ca, and Al ions when paired with 2D Ni 0.25 Mn 0.75 O 2 , a novel cathode that uses increased layer separation to improve on the kinetics of its 3D analog. Our calculations yielded maximum voltages of 3.38 V for Na and 2.7 V for Ca, outperforming 2D Na x MnO 2 and Na x NiO 2 . Diffusion barriers for Li, Na, and Ca are below 300 meV, comparable to existing battery technology and the endpoint 2D cathodes; meanwhile, Mg and Al have prohibitively high diffusion barriers, implying their incompatibility with this cathode. Lastly, density of states calculations and Bader charge analysis show that the cathode becomes conducting following ion adsorption, which is necessary for high-rate performance. 2D Ni 0.25 Mn 0.75 O 2 maintains performance seen with other 2D transition metal oxides while increasing cathode conductivity, indicating that it is a promising candidate for experimental investigation with Li, Na, and Ca ions.
25 ENERGY STORAGE↗
Preventing Electrolyte Decomposition on a Ca Metal Electrode Interface Using an Artificial Solid‐Electrolyte Interphase
Abstract Calcium ion batteries are gaining attention as alternatives to lithium‐ion technology because they offer comparable properties at reduced cost and improved safety. However, progress has been limited because of the inability to efficiently and reversibly plate and strip Ca metal anodes in organic electrolytes. Moreover, the inorganic components of the solid‐electrolyte interphase (SEI) that form via decomposition of the electrolyte often do not allow for the diffusion of Ca ions. In this work, an approach combining density functional theory and ab initio molecular dynamics (AIMD) simulations is utilized to show that the use of a preformed artificial SEI layer of amorphous can potentially prevent electrolyte decomposition. First, Ca is shown to be able to intercalate into an amorphous layer (up to Ca 1.5 Al 2 O 3 ) and diffuse through on a reasonable time scale. Through calculation of the density of states, the system is found to remain insulating up to the equilibrium stoichiometry. Finally, AIMD simulations with a realistic organic electrolyte environment are used to show that this calcinated layer completely prevents the decomposition of solvent molecules. This approach can provide a route to efficient rechargeable Ca ion batteries, paving the way for cheap large‐scale energy storage.
Young, Joshua↗
Electron leakage through heterogeneous LiF on lithium–metal battery anodes
The solid–electrolyte interphase (SEI) that forms on lithium ion battery (LIB) anodes prevents degradation-causing transfer of electrons to the electrolyte. Grain boundaries (GBs) between different SEI components, like LiF, have been suggested to accelerate Li+ transport. However, using the non-equilibrium Green's function technique with density functional theory (NEGF-DFT), we find that GBs enhance electron tunneling in thin LiF films by 1–2 orders of magnitude, depending on the bias. Extrapolating to thicker films using the Wentzel–Kramers–Brillouin (WKB) method emphasizes that safer batteries require passivation of GBs in the SEI.
25 ENERGY STORAGE↗