Search NASA⌕ Search

Engineering topics

Smith, A. F.

Publications and source records attributed to Smith, A. F..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Dynamic response and stability of a composite prop-fan model

Results are presented for blade response and stability during wind tunnel tests of a 62.2 cm diameter model of a prop-fan, advanced turboprop, with swept graphite/epoxy composite blades. Measurements of dynamic response were made with the rotor mounted on an isolated nacelle, with varying tilt for nonuniform inflow, at flow speeds from 0.36 to 0.9 Mach number. The blade displayed no instabilities over the operating range tested, up to 0.9 Mach number and 10,000 RPM. Measurements are compared with those for other prop-fan models of both solid metal and graphite composite construction. The swept composite blade had less response than an unswept composite blade. Composite blades had more response than metal blades. Measurements are compared with theoretically based predictions. The 1-P blade response was significantly overpredicted using unimproved methods and somewhat overpredicted using improved methods. Unexpectedly high 2-P strain levels were measured and suggest the presence of nonlinear effects on blade response.

Smith, A. F.↗
NASA NTRS1985

Analysis and test evaluation of the dynamic response and stability of three advanced turboprop models

Results of dynamic response and stability wind tunnel tests of three 62.2 cm (24.5 in) diameter models of the Prop-Fan, advanced turboprop, are presented. Measurements of dynamic response were made with the rotors mounted on an isolated nacelle, with varying tilt for nonuniform inflow. One model was also tested using a semi-span wing and fuselage configuration for response to realistic aircraft inflow. Stability tests were performed using tunnel turbulence or a nitrogen jet for excitation. Measurements are compared with predictions made using beam analysis methods for the model with straight blades, and finite element analysis methods for the models with swept blades. Correlations between measured and predicted rotating blade natural frequencies for all the models are very good. The IP dynamic response of the straight blade model is reasonably well predicted. The IP response of the swept blades is underpredicted and the wing induced response of the straight blade is overpredicted. Two models did not flutter, as predicted. One swept blade model encountered an instability at a higher RPM than predicted, showing predictions to be conservative.

Bansal, P. N.↗
NASA NTRS1976

Application of Landsat imagery to metallic mineral exploration in Utah

Standard interpretive techniques were used to study the mosaic of two Landsat images of north central Utah including several major mining districts. Correlation of major Landsat-identified lineaments with the major metallic mining districts suggests that the Landsat-identified lineaments are fractures and that their distribution may be a valuable guide for identifying other mineralized areas. The imagery provides a more complete understanding of the geological information for identifying major tectonic and structural trends in the area. Several of the major mines are located on or closely adjacent to the intersections of at least two major lineaments. Landsat data should therefore be used to complement current mineral exploration programs.

Anderson, A. T.↗
NASA NTRS1975

Geological applications of LANDSAT-1 imagery to the Great Salt Lake area

The ERTS program has been designed as a research and development tool to demonstrate that remote sensing from orbital altitudes is a feasible and practical approach to efficient management of earth resources. From this synoptic view and repetitive coverage provided by ERTS imagery of the Great Salt Lake area, large geological and structural features, trends, and patterns have been identified and mapped. A comparative analysis of lineaments observed in September and December data was conducted, existing mineral locations were plotted, and areas considered prospective for mineralization based on apparent structure-mineralization relationships were defined. The additional information obtained using ERTS data provides an added source of information to aid in the development of more effective mineral exploration programs.

Anderson, A. T.↗
NASA NTRS1974

Environmental observations of the Great Salt Lake Basin from ERTS-1

Some ERTS-1 observations of snowcover, turbidity variations in the major lakes, surface water area changes, land use features, and phenomena associated with industrial emissions are described. Turbidity patterns in the major water bodies can be observed that appear to be related to the general wind flow, or to lake circulation patterns, and the chemical or biological constituents in the water. Monthly, seasonal, and annual changes in surface water extent can be monitored and serve as indicators of water availability. Time and space variations in snowcover that are a function of exposure or time of year were observed in some regions. Specific measurements of snowline altitude during the major snowmelt period of 1973 were obtained. The existence and effect of industrial emission on vegetation were found to be detectable.

Smith, A. F.↗