Engineering topics

Smith, Arthur R.

Publications and source records attributed to Smith, Arthur R..

9 records

DOE OSTI2024

Accommodating a hexagonal ζ- phase Mn 2 N film on a cubic MgO (001) substrate

The thin films of c -plane dominated hexagonal ζ- phase Mn 2 N were successfully grown on a cubic MgO (001) substrate directly using plasma-assisted molecular beam epitaxy. The surface was comprehensively studied through experimental and theoretical approaches. Reflection high energy electron diffraction revealed two pseudo-cubic domains along [100] MgO and [110] MgO , and one hexagonal domain, which is 30° apart from the [100] MgO direction. Scanning tunneling microscopy was used to image and resolve the high-quality surface, revealing a distorted hexagonal surface structure. Furthermore, atomic resolution of the hexagonal domain with a 2 × 2 reconstructed surface is presented. For c-plane surface, theoretical investigations were carried out using first principles studies to determine the surface formation energy for various reconstructed surfaces. The theoretical study shows that the nitrogen terminated 2 × 2 structure with a manganese adatom on the surface as the most stable reconstruction that reproduces the experimental results. A corresponding simulated scanning tunneling microscopy model is also presented, providing strong support for the experimentally observed in-plane lattice structures. Furthermore, the manganese: nitrogen stoichiometry within the bulk and surface is in good agreement with the expected ratio of 2:1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Co-deposition of bismuth-nitrogen films on MgO (001) by molecular beam epitaxy

Here, we attempted to grow a thin film of BiN by co-deposition of bismuth and nitrogen on rock-salt structure MgO (001) substrates. Furthermore, we studied the effect of variation of the growth temperature and the nitrogen to bismuth flux ratios on sample growth. For the samples grown and conditions used, we do not find strong evidence for the formation of a bulk Bi-N alloy. Even for very high nitrogen to bismuth flux ratio, we observed only bismuth and no nitrogen using bulk Rutherford back-scattering spectroscopy measurements, and only 1%–2% nitrogen was seen through surface Auger electron spectroscopy measurements. The in-plane lattice measurements show that the resulting Bi (110) samples are strained, which is presumably caused by lattice mismatch between the sample and the substrate when grown without any buffer layer. The use of a high-temperature buffer layer helps to release strain in the sample but only along one axis. Measurements of the atomic layer spacing using x-ray diffraction and also scanning tunneling microscopy confirm the Bi (110) thin film sample structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Exploring the interfacial structure and crystallinity for direct growth of Mn 3 Sn(0001) on sapphire (0001) by molecular beam epitaxy

The Kagome antiferromagnet Mn 3 Sn has garnered a lot of attention due to the presence of interesting properties such as anomalous Hall effects and Nernst effects. Until now, few papers have been reported to grow using molecular beam epitaxy with a buffer layer or on other substrates. In this paper, we discuss the synthesis of crystalline Mn 3 Sn layers, prepared on Al 2 O 3 (0001) without a buffer layer using molecular beam epitaxy. The growth is monitored in-situ using reflection high energy electron diffraction and measured ex-situ using X-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. The samples were deposited at 524 ± 5 °C, with an Mn: Sn atomic flux ratio of 3.2:1 for 90 minutes. Orientation relationships between the Mn 3 Sn films and the sapphire substrates are determined from in-plane and out-of-plane measurements. Our analysis indicates that the resulting film is predominantly c−plane oriented. Lastly, the samples prepared in this way were found to be discontiguous, showing a 3-dimensional morphology. According to first-principles calculations, the Mn 3 Sn exhibits a displaced Kagome structure in the very first stages of growth, for 2ML and 4ML growth on Al 2 O 3 (0001). This result is corroborated by calculating the surface formation energies and explains the observed RHEED patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Study of the structure, structural transition, interface model, and magnetic moments of CrN grown on MgO(001) by molecular beam epitaxy

Structural phase transition is studied in high quality CrN thin films grown by molecular beam epitaxy on MgO(001) substrates. Cross-sectional transmission electron microscopy and x-ray diffraction reveal that the epitaxial relationship between CrN film and MgO substrate is [100] CrN /[100] MgO , [110] CrN /[110] MgO , and [001] CrN /[001] MgO . The films show tensile strain/compression at the CrN/MgO(001) interface, which relaxes gradually with the film growth. Temperature dependent x-ray diffraction measurements show a first-order structural phase transition. In addition to the experimental measurements, first-principles theoretical calculations have been carried out for finding a stable model for the CrN/MgO interface. Furthermore, these calculations determine two possible models for the interface, where a monolayer of chromium oxide is formed between the CrN and MgO layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Molecular beam epitaxy and crystal structure of majority a -plane-oriented and substrate-strained Mn 3 Sn thin films grown directly on sapphire (0001)

The Kagome antiferromagnet Mn 3 Sn has garnered much attention due to the presence of exciting properties such as anomalous Hall and Nernst effects. This paper discusses the synthesis of crystalline Mn 3 Sn thin films, prepared on Al 2 O 3 (0001) substrates at 453 ± 5°C using molecular beam epitaxy. The growth is monitored in situ using reflection high energy electron diffraction and measured ex situ using x-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. Our analysis shows the in-plane lattice constants of a 1,M = 4.117 ± 0.027 Å and a 2,M = 4.943 ± 0.033 Å, which is a very unexpected result when compared to the bulk a-plane Mn 3 Sn. This indicates a strain in the film and makes it challenging to provide a straightforward explanation. In an effort to explain our results, we discuss two possible orientation relationships between the Mn 3 Sn films and the sapphire substrates. Samples prepared under these conditions appear to have smooth surfaces locally, but overall the film has a 3D island morphology. First-principles calculations provide atomic models of the Mn 3 Sn (112¯0) lattice on Al 2 O 3 (0001) high symmetry sites, indicating that the L3-R90° is the most stable configuration. A detailed discussion of the experimental data and theoretical results, as well as strain effects, is provided.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Investigating the magnetic and atomic interface configuration for a model Fe/CrN bilayer system

A bilayer of iron on chromium nitride (Fe/CrN) is an interesting system for exchange biasing and sensing applications as the Néel temperature of CrN is 280 K and the Curie temperature of Fe is 1043 K. In this paper, we study the crystal and magnetic structures of the Fe/CrN interface at the atomic level. High quality epitaxial Fe/CrN bilayers prepared by molecular beam epitaxy grow in 001 orientation on MgO(001) substrates with uniform layer thicknesses and sharp interfaces. Our data reveal the epitaxial correlation between Fe and CrN crystals and their magnetic structures at the interface. The magnetic anisotropy directions of Fe and CrN are found parallel to [110] MgO . We studied the electronic and magnetic properties of the interface by performing the first-principles total-energy calculations. Here, we present a model that combines the crystal and magnetic structures of the Fe/CrN bilayer and fully explains all results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Surface structures of magnetostrictive D0 3 -Fe 3 Ga(0 0 1)

First-principles total energy calculations and scanning tunneling microscopy experiments were performed to study the surface reconstruction of the magnetostrictive Fe 3 Ga alloy. The inverse magnetostrictive behavior was evaluated in the bulk by compressing and stretching its lattice parameter, showing an increase in magnetic moments as strain increases. Surface analysis demonstrates two thermodynamically stable surfaces, the (1 × 1) and (3 × 1). The (1 × 1) is an ideal FeGa terminated surface, whereas the (3 × 1) is also FeGa terminated but it has a first-layer Fe atom substituted by a Ga atom every three unit-cells, forming a row-like surface structure. Tersoff–Hamann scanning tunneling microscopy simulations were obtained and compared with experimental results. We found good agreement between theory and experiment, in which the distance between rows is ~12.3 Å. Theoretical findings suggest that the substrate-induced strain may increase the stability of the (3 × 1) reconstruction. Analysis of the magnetic moments in the reconstructions showed that their behavior is affected by a surface effect, as well as by the inverse magnetostriction of the structure. A good understanding of the FeGa surface reconstructions is an important step towards further improvements in magnetic storage devices and sensors.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Noncollinear magnetic configurations and substrate-mediated interactions in Mn trimers on the GaN (000$\bar{1}$) surface

Collinear and noncollinear calculations based on density functional theory are carried out to elucidate the magnetic ordering of Mn trimers on a GaN ($000\bar{1}$) substrate. These trimers had previously been observed in $3a \times 3a$ surface reconstructions through Mn deposition onto the N-polar face of wurtzite GaN($000\bar{1}$). In this work, we start off by studying the effect of spin orbit coupling for the case of monomers and dimers of Mn atoms on top of a GaN surface. Based on an effective spin Hamiltonian, we estimate the magnetic anisotropy energy (MAE) for those cases and found that it is four orders of magnitude weaker than the exchange magnetic coupling between Mn adatoms. In the Mn trimer case, the magnetic ground state has the Mn spins in-plane with the GaN surface in which the relative spin orientation within each trimer is noncollinear due to the competition between the two antiferromagnetic interactions that affect each Mn spin in the trimer, which leads to the found energy minimum with 120 degree angles between the spins. By exploring the nature and fundamental mechanisms for the magnetic interaction among the Mn trimers, we find that the surface states of the substrate play a key role, involving a Ruderman-Kittel-Kasuya-Yosida (RKKY)-type interaction. We report on an electron-mediated long-distance exchange coupling between localized magnetic moments on a GaN($000\bar{1}$) surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Local strain-dependent electronic structure and perpendicular magnetic anisotropy of a MnGaN 2D magnetic monolayer

Local strain-dependent spin-polarized electronic structure of a two-dimensional (2D) magnetic layer is an exciting property for practical applications. For example, it holds the promise for advanced ultrathin spintronic nanodevices with customized electronic and magnetic properties by local strain engineering. Here, we demonstrate that the spin-polarized electronic structure of a 2D manganese gallium nitride (MnGaN-2D) magnetic monolayer is sensitive to intrinsic local lattice strain, as proven by first-principles calculations and indicated by scanning tunneling spectroscopy measurements. Atomic resolution images reveal a highly non-Gaussian lattice spacing/strain distribution, while the spectroscopy reveals variations in the electronic density of states. Simulations of the MnGaN-2D monolayer based on first-principles calculations, including both isotropic and anisotropic strains, confirm a highly strain-dependent manganese partial density of states. Spin-orbit coupling is included which indicates either out-of-plane perpendicular magnetic anisotropy (PMA) or in-plane magnetic anisotropy, dependent on the type of strain whether compressive or tensile, suggesting that MnGaN-2D is magnetoelastic. The MnGaN-2D PMA is further supported by superconducting quantum interference device magnetometry measurements which reveal a high spin polarization of ~ 79 % at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗