Engineering topics

Smith, Doug

Publications and source records attributed to Smith, Doug.

7 records

DOE OSTI2022

Unraveling the effects of management and climate on carbon fluxes of U.S. croplands using the USDA Long-Term Agroecosystem (LTAR) network

Understanding the carbon fluxes and dynamics from a broad range of agricultural systems has the potential to improve our ability to increase carbon sequestration while maintaining crop yields. Short-term, single-location studies have limited applicability, but long-term data from a network of many locations can provide a broader understanding across gradients of climate and management choices. Here we examine eddy covariance measured carbon dioxide (CO 2 ) fluxes from cropland sites across the United States Department of Agriculture's Long-Term Agroecosystem Research (LTAR) network. The dataset was collected between 2001 and 2020, spanning 13 sites for a total of 182 site-years. Average seasonal patterns of net ecosystem CO 2 exchange (NEE), gross primary productivity (GPP), and ecosystem respiration (R eco ) were determined, and subsequent regression analysis on these “flux climatologies” was used to identify relationships to mean annual temperature (MAT), mean annual precipitation (MAP), cropping systems, and management practices. At rainfed sites, carbon fluxes were better correlated with MAP (r2 ≤ 0.5) than MAT (r2 ≤ 0.22). Net carbon balance was different among cropping systems (p < 0.001), with the greatest net carbon uptake occurring in sugarcane (Saccharum spp. hybrids) and the least in soybean (Glycine max) fields. Crop type had a greater effect on carbon balance than irrigation management at a Nebraska site. Across cropping systems, grain crops often had higher GPP and were more likely to have net uptake when compared to legume crops. This multi-site analysis highlights the potential of the LTAR network to further carbon flux research using eddy covariance measurements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

The effects of bias, drift, and trends in calculating anomalies for evaluating skill of seasonal-to-decadal initialized climate predictions

In initialized seasonal to decadal (S2D) predictions, model hindcasts rapidly drift away from the initial observed state and converge toward a preferred state characterized by systematic error, or bias. Bias and drift are among the greatest challenges facing initialized prediction today. Differences in trends between initial states and drifted states, combined with bias and drift, introduce complexities in calculating anomalies to assess skill of initialized predictions. We examine several methods of calculating anomalies using the Decadal Prediction Large Ensemble (DPLE) using the Community Earth System Model (CESM) initialized hindcasts and focus on Pacific and Atlantic SSTs to illustrate issues with anomaly calculations. Three methods of computing anomalies, one as differences from a long term model climatology, another as bias-adjusted differences from the previous 15 year average from observations, and a third as differences from the previous 15 year average from the model, are contrasted and each is shown to have limitations. For the first, trends in bias and drift introduce higher skill estimates earlier and later in the hindcast period due to the trends that contribute to skill. For the second, higher skill can be introduced in situations where low frequency variability in the observations is large compared to the hindcasts on timescales greater than 15 years, while lower skill can result if the predicted signal is small and the bias-correction itself produces a transition of SST anomalies to the opposite sign of those that are observed. The third method has somewhat lower skill compared to each of the others, but has less difficulties with not only the long term trends in the model climatology, but also with the unrealistic situational skill from using observations as a reference. However, the first 15 years of the hindcast period cannot be evaluated due to having to wait to accumulate the previous 15 year model climatology before the method can be applied. Here, the IPO transition in the 2014–2016 time frame from negative to positive (predicted by Meehl et al. in in Nat Commun, 10.1038/NCOMMS11718, 2016) did indeed verify using all three methods, though each provides somewhat different skill values as a result of the respective limitations. There is no clear best method, as all are roughly comparable, and each has its own set of limitations and caveats. However, all three methods show generally higher overall skill in the AMO region compared to the IPO region.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Decadal climate variability in the tropical Pacific: Characteristics, causes, predictability, and prospects

Decadal climate variability and change affects nearly every aspect of our world, including weather, agriculture, ecosystems, and the economy. Predicting its expression is thus of critical importance on multiple fronts. Power et al. review what is known about tropical Pacific decadal climate variability and change, the degree to which it can be simulated and predicted, and how we might improve our understanding of it. Here, more accurate projections will require longer and more detailed instrumental and paleoclimate records, improved climate models, and better data assimilation methods. —HJS.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Initialized Earth system prediction from subseasonal to decadal timescales

Initialized Earth system predictions are made by starting a numerical prediction model in a state as consistent as possible to observations, and running it forward in time for up to ten years. Skillful predictions at time slices from subseasonal to seasonal (S2S), seasonal to interannual (S2I) and seasonal to decadal (S2D) offer information useful for various stakeholders, from agriculture to water resource management, and human and infrastructure safety. In this Review, we examine the processes influencing predictability, and discuss estimates of skill across S2S, S2I and S2D timescales. There are encouraging signs that skillful predictions can be made: at S2S timescales, there has been some skill in predicting the Madden-Julian Oscillation and North Atlantic Oscillation; at S2I in predicting the El Niño-Southern Oscillation; and at S2D, in predicting variability in North Atlantic sea surface temperatures. However, challenges remain, and future work must prioritise reducing model error, more effectively communicating forecasts to users, and increasing process and mechanistic understanding that could increase predictive skill and, in turn, confidence. As numerical models progress towards Earth system models, initialized predictions are expanding to include prediction of sea-ice, air pollution, terrestrial and ocean biochemistry which can bring clear benefit to society and various stakeholders.

climate prediction↗

NASA NTRS2003

Measuring the Internal Environment of Solid Rocket Motors During Ignition

A new instrumentation system has been developed to measure the internal environment of solid rocket test motors during motor ignition. The system leverages conventional, analog gages with custom designed, electronics modules to provide safe, accurate, high speed data acquisition capability. To date, the instrumentation system has been demonstrated in a laboratory environment and on subscale static fire test motors ranging in size from 5-inches to 24-inches in diameter. Ultimately, this system is intended to be installed on a full-scale Reusable Solid Rocket Motor. This paper explains the need for the data, the components and capabilities of the system, and the test results.

Weisenberg, Brent↗

NASA NTRS2003

A Novel Data System for Verification of Internal Parameters of Motor Design

Three major obstacles have limited the amount of information that can be obtained from inside an operating solid rocket motor. The first is a safety issue due to the presence of live propellant interacting with classical, electrical instrumentation. The second is a pressure vessel feed through risk arising from bringing a large number of wires through the rocket motor wall safely. The third is an attachment/protection issue associated with connecting gages to live propellant. Thiokol has developed a highly miniaturized, networked, electrically isolated data system that has safely delivered information from classical, electrical instrumentation (even on the burning propellant surface) to the outside world. This system requires only four wires to deliver 80 channels of data at 2300 samples/second/channel. The feed through leak path risk is massively reduced from the current situation where each gage requires at least three pressure vessel wire penetrations. The external electrical isolation of the system is better than that of the propellant itself. This paper describes the new system.

Smith, Doug↗

NASA NTRS2001

Reducing Bolt Preload Variation with Angle-of-Twist Bolt Loading

Critical high-pressure sealing joints on the Space Shuttle reusable solid rocket motor require precise control of bolt preload to ensure proper joint function. As the reusable solid rocket motor experiences rapid internal pressurization, correct bolt preloads maintain the sealing capability and structural integrity of the hardware. The angle-of-twist process provides the right combination of preload accuracy, reliability, process control, and assembly-friendly design. It improves significantly over previous methods. The sophisticated angle-of-twist process controls have yielded answers to all discrepancies encountered while the simplicity of the root process has assured joint preload reliability.

Thompson, Bryce↗