Search NASA⌕ Search

Engineering topics

Smith, G. W.

Publications and source records attributed to Smith, G. W..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Debris control design achievements of the booster separation motors

The stringent debris control requirements imposed on the design of the Space Shuttle booster separation motor are described along with the verification program implemented to ensure compliance with debris control objectives. The principal areas emphasized in the design and development of the Booster Separation Motor (BSM) relative to debris control were the propellant formulation and nozzle closures which protect the motors from aerodynamic heating and moisture. A description of the motor design requirements, the propellant formulation and verification program, and the nozzle closures design and verification are presented.

Smith, G. W.↗
NASA NTRS1977

Orbital servicing and remotely manned systems

The potential of the concepts and techniques of remotely manned aerospace systems to fully exploit the utility and benefits of orbital servicing is discussed. Orbital servicing has been shown to benefit the Space Transportation System by helping to satisfy spacecraft program objectives of long operating times on-orbit while reducing program costs. The wide range of servicer mechanisms postulated in the literature is reduced to two concepts which are used to generate a set of control system requirements. Three control mode alternatives - automatic, supervisory control, and remotely manned control - are introduced, defined, evaluated and each found wanting in certain areas. A combination of supervisory and remotely manned control is shown to overcome most problems.

Smith, G. W.↗
NASA NTRS1977

Surface temperatures and temperature gradient features of the US Gulf Coast waters

Satellite thermal infrared data on the Gulf of Mexico show that a seasonal cycle exists in the horizontal surface temperature structure. In the fall, the surface temperatures of both coastal and deep waters are nearly uniform. With the onset of winter, atmospheric cold fronts, which are accompanied by dry, low temperature air and strong winds, draw heat from the sea. A band of cooler water forming on the inner shelf expands, until a thermal front develops seaward along the shelf break between the cold shelf waters and the warmer deep waters of the Gulf. Digital analysis of the satellite data was carried out in an interactive mode using a minicomputer and software. A time series of temperature profiles illustrates the temporal and spatial changes in the sea-surface temperature field.

Huh, O. K.↗
NASA NTRS1976

Space shuttle booster separation motor design

The separation characteristics of the space shuttle solid rocket boosters (SRBs) are introduced along with the system level requirements for the booster separation motors (BSMs). These system requirements are then translated into specific motor requirements that control the design of the BSM. Each motor component is discussed including its geometry, material selection, and fabrication process. Also discussed is the propellant selection, grain design, and performance capabilities of the motor. The upcoming test program to develop and qualify the motor is outlined.

Smith, G. W.↗
NASA NTRS1976

Design, fabrication, testing and delivery of a solar collector

A two phase program encompassing the redesign and fabrication of a solar collector which is low in cost and aesthetically appealing is described. Phase one work reviewed the current collector design and developed a low-cost design based on specific design/performance/cost requirements. Throughout this phase selected collector component materials were evaluated by testing and by considering cost, installation, maintainability and durability. The resultant collector design was composed of an absorber plate, insulation, frame, cover, desiccant and sealant. In Phase two, three collector prototypes were fabricated and evaluated for both nonthermal and thermal characteristics. Tests included static load tests of covers, burst pressure tests of absorber plates, and tests for optical characteristics of selective absorber plate coatings. The three prototype collectors were shipped to Marshall Space Flight Center for use in their solar heating and cooling test facility.

Sims, W. H.↗
NASA NTRS1975

Orbital servicing, and remotely manned systems

The potential of concepts and techniques of remotely manned aerospace systems to fully exploit the utility and benefits of orbital servicing is discussed. Orbital servicing in the form of module exchange enhances the STS goals through replacement of failed equipment, resupply of consumables, and updating of obsolete equipment.

Smith, G. W.↗
NASA NTRS1975

The assembly of large structures in space

Techniques developed for orbital assembly of the support structure for a 1000 meter diameter microwave power transmission system antenna are described. The operation is performed in two phases using the shuttle remote manipulator system in low earth orbit, and a mobile assembler in geosynchronous orbit.

Smith, G. W.↗
NASA NTRS1972

Pulse performance analysis for small hypergolic propellant rocket engines

Small rocket engine tests were conducted for the purpose of obtaining pulse performance data to aid in preliminary design and evaluation of attitude control systems. Both monopropellant and hypergolic bipropellant engines of thrust levels from 5 to 445 N (1 to 100 lb) were tested. The performance data for the hypergolic propellant rockets are compared with theoretical performance calculated from idealized chamber filling and evacuation characteristics. Electromechanical delays in valve response and heat transfer characteristics were found to cause substantial deviation between theoretical performance and test performance. The theoretical analysis is modified to obtain a semiempirical model for hypergolic propellant rockets.

Smith, G. W.↗
NASA NTRS1972

Pulse performance analysis for small hypergolic-propellant rocket engines

Small rocket engine tests were conducted for the purpose of obtaining pulse performance data to aid in preliminary design and evaluation of attitude control systems. Both monopropellant and hypergolic bipropellant engines of thrust levels from 1 to 100 lbs were tested. The performance data for the hypergolic propellant rockets are compared with theoretical performance calculated from idealized chamber filling and evacuation characteristics. Electromechanical delays in valve response and heat transfer characteristics were found to cause substantial deviation between theoretical and test performance. The theoretical analysis is modified to obtain a semi-empirical model for hypergolic propellant rockets which is demonstrated to be reasonably accurate for two different engine configurations over a considerable range of duty cycles.

Smith, G. W.↗