Operation of the 56 MHz superconducting rf cavity in RHIC with higher order mode damper
Not Available
Engineering topics
Publications and source records attributed to Smith, Kevin.
Not Available
This panel focused on the benefits of applying commercial tools and best practices to DOE cleanup sites. The panelist presented tools and applications that have been demonstrated on commercial and other government sites that are readily available to address similar challenges found on many DOE cleanup sites. Attendees gained an understanding of a few of the commercial applications that have resulted in innovation and cost savings. Presentations proposed include: 1 - Internet of Things and Humans - IoTH (Javid Kelley, Perma-Fix Environmental Services (USA)); 2 - Commercial Tools and Practices to Cleanup DOE Nuclear Sites (Mark Lesinski, Canadian Nuclear Laboratories (Canada)); 3 - Stakeholder-Engaged Structured Decision Making and GISDT - Guided Interactive Statistical Decision Tools (Paul Black, Neptune and Company, Inc. (USA)); 4 - Benefits of Commercial Tools and Practices to DOE Cleanup of Nuclear Sites - Panel 091 (Kevin Smith, PAE (USA)); 5 - MAECTITE Treatment Process Overview (Daniel Caputo, Sevenson Environmental Services, Inc. (USA))
For the proposed electron-ion collider eRHIC, an electron storage ring will be installed in the existing RHIC tunnel. To reach the high luminosity of up to 10³⁴ cm⁻² sec⁻¹, beam currents up to 2.5A have to be stored. Besides high luminosity the physics program requires spin polarization levels of 70 percent, with both spin "up" and spin "down" orientations present in the fill. This is only feasible by using a full-energy spin polarized injector that replaces bunches faster than the depolarization rate. To limit the repetition rate of that injector to about one hertz, the polarization lifetime in the storage ring has to be maximized by proper spin matching and countermeasures for the machine misalignments. We will give an overview of the electron storage ring design.
To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under development at BNL. The Linac of LEReC is designed to deliver 2 MV to 5 MV electron beam, with rms dp/p less than 5·10⁻⁴. The HOM in this Linac is carefully studied to ensure this specification.
To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under development at BNL. Two normal conducting cavities, a single cell 704 MHz cavity and a 3 cell 2.1 GHz third harmonic cavity, will be used in LEReC for energy spread correction. Currently these two cavities are under fabrication. In this paper we report the RF design of these two cavities.
The Advanced Topographic Laser Altimeter System (ATLAS) will be the only instrument on the Ice, Cloud, and Land Elevation Satellite -2 (ICESat-2). ICESat-2 is the 2nd-generation of the orbiting laser altimeter ICESat, which will continue polar ice topography measurements with improved precision laser-ranging techniques. In contrast to the original ICESat design, ICESat-2 will use a micro-pulse, multi-beam approach that provides dense cross-track sampling to help scientists determine a surface's slope with each pass of the satellite. The ATLAS laser will emit visible, green laser pulses at a wavelength of 532 nm and a rate of 10 kHz and will be split into 6 beams. A set of six identical, thermally-tuned etalon filter assemblies will be used to remove background solar radiation from the collected signal while transmitting the laser light to the detectors. A seventh etalon assembly will be used to monitor the laser center wavelength during the mission. In this paper, we present the design and optical performance measurements of the ATLAS optical filter assemblies (OFA) in air and in vacuum before integration on the ATLAS instrument.
The objective of this project was to develop advanced power batteries suitable for power grid regulation services and for renewable energy applications. The primary goals were to purchase equipment, design and build equipment, determine equipment layout, install equipment, design and develop advanced power batteries, conduct trial manufacturing operations, and evaluate the advanced power batteries. The deliverable is a complete process evaluation summary. The purpose of the current work was to improve the speed, efficiency, and quality for advanced power battery production. More specifically, the project scope was focused on the UltraBattery® electrode production process only. The capacitor portion of the UltraBattery® demands a set of equipment specific to capacitor active material (CAM) mixing, transport, application, and curing. Teams were created to purchase and/or design and build equipment suitable for the capacitor electrode production process. Each piece of equipment was individually evaluated, optimized, and verified. At the conclusion of this process, electrodes were produced on the new equipment in the new production area. Batteries were built and tested using the new advanced battery test equipment.
This tutorial will explain the concepts and steps for interfacing a National Instruments LabView virtual instrument (VI) running on a Windows platform with another computer via the Object Management Group (OMG) Data Distribution Service (DDS) as implemented by the Twin Oaks Computing CoreDX. This paper is for educational purposes only and therefore, the referenced source code will be simplistic and void of all error checking. Implementation will be accomplished using the C programming language.
Tools for Engine Diagnostics is a major task in the Propulsion System Health Management area of the Single Aircraft Accident Prevention project under NASA s Aviation Safety Program. The major goal of the Aviation Safety Program is to reduce fatal aircraft accidents by 80 percent within 10 years and by 90 percent within 25 years. The goal of the Propulsion System Health Management area is to eliminate propulsion system malfunctions as a primary or contributing factor to the cause of aircraft accidents. The purpose of Tools for Engine Diagnostics, a 2-yr-old task, is to establish and improve tools for engine diagnostics and prognostics that measure the deformation and damage of rotating engine components at the ground level and that perform intermittent or continuous monitoring on the engine wing. In this work, nondestructive-evaluation- (NDE-) based technology is combined with model-dependent disk spin experimental simulation systems, like finite element modeling (FEM) and modal norms, to monitor and predict rotor damage in real time. Fracture mechanics time-dependent fatigue crack growth and damage-mechanics-based life estimation are being developed, and their potential use investigated. In addition, wireless eddy current and advanced acoustics are being developed for on-wing and just-in-time NDE engine inspection to provide deeper access and higher sensitivity to extend on-wing capabilities and improve inspection readiness. In the long run, these methods could establish a base for prognostic sensing while an engine is running, without any overt actions, like inspections. This damage-detection strategy includes experimentally acquired vibration-, eddy-current- and capacitance-based displacement measurements and analytically computed FEM-, modal norms-, and conventional rotordynamics-based models of well-defined damages and critical mass imbalances in rotating disks and rotors.
The investigation was based on the following steps: (1) Read the 28 Entity IGES (Initial Graphics Exchange Specification) Test File into the CAD data base with the IGES post-processor; (2) Make the modifications to the displayed geometries, which should produce the normalized front view and the drawing entity defined display; (3) Produce the drawing entity defined display of the file as it appears in the CAD system after modification to the geometry; (4) Translate the file back to IGES format using IGES pre-processor; (5) Read the IGES file produced by the pre-processor back into the CAD data base; (6) Produce another drawing entity defined display of the CAD display; and (7) Compare the plots resulting from steps 3 and 6 - they should be identical to each other.