Search NASA⌕ Search

Engineering topics

Smith, Kord

Publications and source records attributed to Smith, Kord.

At least 19 records

3D full core BEAVRS using OpenMOC with transport equivalence

Using an optimized implementation of the three-dimension method of characteristics for neutron transport, as well as a novel equivalence method for transport calculations de- signed to recover self-shielding errors from neglecting the angular dependence of reso- nant group absorption, a 3D full core light water reactor hybrid stochastic-deterministic eigenvalue calculation was achieved. This paper presents the optimizations developed and compares the transport solutions obtained. It realizes a runtime near 6,000 CPU hours for the statepoint, an improvement of an order of magnitude on previous works, with less than 1% error on pin fission/U-238 capture ratios and a few dozen pcms on the eigenvalue.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Calculation of multi-group migration areas in deterministic transport simulations

Recent work on the Cumulative Migration Method (CMM) has demonstrated that it is possible to define multi-group transport cross sections directly from Monte Carlo spectral calculations by utilizing edits of the energy-dependent neutron migration areas. However, it is difficult to demonstrate that downstream deterministic transport calculations actually preserve Monte Carlo migration areas. This paper addresses this issue by: 1) demonstrating the relationship of migration area with the concept of mean squared displacement, 2) deriving, and validating vs. Monte Carlo, an analytic expression for computing one-group migration areas for a homogeneous medium with energy-independent cross sections, 3) deriving, and validating vs. Monte Carlo, an analytic expression for computing multi-group migration areas for a homogenized medium with energy-dependent cross sections, and 4) rigorously proving that energy condensation of multi-group transport cross section must be inverse flux weighted in order to preserve Monte Carlo neutron migration areas.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Full core 3D simulation of the BEAVRS benchmark with OpenMOC

The Method of Characteristics (MOC) has seen wide interest in reactor physics because of its accuracy and efficiency in computing lattice physics problems. While most of its use has been in solving 2D problems, there has been recent interest in extending MOC to 3D in order to more accurately calculate 3D power distributions in LWRs. While the method is naturally extensible to 3D, it presents significant computational difficulties. OpenMOC, an open source MOC simulator, has been extended from 2D to 3D capabilities. Simulation results are presented in this study for the full core 3D simulation of the BEAVRS benchmark, adequately resolved in space and angle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multigroup Cross-Section Generation with the OpenMC Monte Carlo Particle Transport Code

High-fidelity deterministic transport codes require highly accurate multigroup cross sections (MGXS). Monte Carlo is increasingly cited as a reactor-agnostic approach to MGXS generation since it is unconstrained by the engineering-based approximations that limit the applicability of deterministic MGXS generation tools. This paper introduces a new framework that uses the OpenMC Monte Carlo code to generate MGXS for use in multigroup transport codes. The openmc.mgxs module is built atop OpenMC's Python application programming interface to process tally data output by the OpenMC executable. This paper validates the module to generate MGXS that enable the multigroup OpenMOC transport code to compute eigenvalues to within 50 pcm and fission rates to within 1% of reference solutions for two heterogeneous pressurized water reactor benchmarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integral Full Core Multi-Physics PWR Benchmark with Measured Data

In recent years, the importance of modeling and simulation has been highlighted extensively in the DOE research portfolio with concrete examples in nuclear engineering with the CASL and NEAMS programs. These research efforts and similar efforts worldwide aim at the development of high-fidelity multi-physics analysis tools for the simulation of current and next-generation nuclear power reactors. Like all analysis tools, verification and validation is essential to guarantee proper functioning of the software and methods employed. The current approach relies mainly on the validation of single physic phenomena (e.g. critical experiment, flow loops, etc.) and there is a lack of relevant multiphysics benchmark measurements that are necessary to validate high-fidelity methods being developed today. This work introduces a new multi-cycle full-core Pressurized Water Reactor (PWR) depletion benchmark based on two operational cycles of a commercial nuclear power plant that provides a detailed description of fuel assemblies, burnable absorbers, in-core fission detectors, core loading and re-loading patterns. This benchmark enables analysts to develop extremely detailed reactor core models that can be used for testing and validation of coupled neutron transport, thermal-hydraulics, and fuel isotopic depletion. The benchmark also provides measured reactor data for Hot Zero Power (HZP) physics tests, boron letdown curves, and three-dimensional in-core flux maps from 58 instrumented assemblies. The benchmark description is now available online and has been used by many groups. However, much work remains to be done on the quantification of uncertainties and modeling sensitivities. This work aims to address these deficiencies and make this benchmark a true non-proprietary international benchmark for the validation of high-fidelity tools. This report details the BEAVRS uncertainty quantification for the first two cycle of operations and serves as the final report of the project.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗