Engineering topics

Smith, Marc K.

Publications and source records attributed to Smith, Marc K..

3 records

NASA NTRS1997

The Behavior of Unsteady Thermocapillary Flows

We have found that it is possible to have steady thermocapillary flows in any of these three systems provided the liquid layer is not too thin or the surface tension is not too small. If these conditions are not met, then no steady solutions are possible and the film thins and approaches a condition of rupture near the hot end. Future work on these problems will include the effect of liquid inertia in the calculations for the cylindrical cavity. The stabilization effect of inertia may offset the destabilization effect inherent in the cylindrical geometry and result in a stable film flow on the cylinder. This type of behavior could be very significant in terms of understanding the stability of thermocapillary flow in liquid bridges and in the float-zone crystal growth process.

Smith, Marc K.↗

NASA NTRS1996

The Development of Novel, High-Flux, Heat Transfer Cells for Thermal Control in Microgravity

In order to meet the future needs of thermal management and control in space applications such as the Space Lab, new heat-transfer technology capable of much larger heat fluxes must be developed. To this end, we describe complementary numerical and experimental investigations into the fundamental fluid mechanics and heat-transfer processes involved in a radically new, self contained, heat transfer cell for microgravity applications. In contrast to conventional heat pipes, the heat transfer in this cell is based on a forced droplet evaporation process using a fine spray. The spray is produced by a novel fluidic technology recently developed at Georgia Tech. This technology is based on a vibration induced droplet atomization process. In this technique, a liquid droplet is placed on a flexible membrane and is vibrated normal to itself. When the proper drop size is attained, the droplet resonates with the surface motion of the membrane and almost immediately bursts into a shower of very fine secondary droplets. The small droplets travel to the opposite end of the cell where they impact a heated surface and are evaporated. The vapor returns to the cold end of the cell and condenses to form the large droplets that are fragmented to form the spray. Preliminary estimates show that a heat transfer cell based on this technology would have a heat-flux capacity that is an order of magnitude higher than those of current heat pipes designs used in microgravity applications.

Smith, Marc K.↗

NASA NTRS1994

The behavior of unsteady thermocapillary flows

The thermocapillary-driven flow of a liquid in a shallow slot provides a simple model to explore the effects of free-surface deflection and end walls on the stability of the flow. Such an investigation may be useful in understanding the complex flow seen in processes such as the float-zone refining of single crystals. A linear stability analysis of the viscously-dominated slot flow indicates stable basic states to both tow- and three-dimensional infinitesimal disturbances for capillary numbers below 43.3. Above this capillary number steady solutions do not exist. We also discuss current work involving the development of an inertially-dominated slot-flow model using singular perturbation methods. If these flows are unstable, inertial effects would be the only possible cause of the instability.

Vrane, David R.↗