Search NASA⌕ Search

Engineering topics

Smith, Ron

Publications and source records attributed to Smith, Ron.

Verdant Power TriFrame, Gen5 KHPS Turbine, and BOP System Content Models

This submission includes System Content Models with data following manufacture for the Verdant Power TriFrame, Gen5 Kinetic Hydropower System (KHPS) Turbines, and Balance of Plant (BOP). The TriFrame installs 3 Gen5 KHPS Turbines. The BOP system controls the turbines and interconnects the TriFrame to shoreline with supervisory control and data acquisition (SCADA).

16 TIDAL AND WAVE POWER↗

Abstract - Cooperative Research and Development Agreement between AK Supply, Inc. and National Energy Technology Laboratory

The main goal of CRADA between AK Supply and NETL is to redesign the solid oxide fuel cell configuration for hybrid power generation systems for greater flexibility and operability. The new fuel cell design will consider incorporation of thermal energy storage into the fuel cell by modifying the material composition to increase the specific heat and/or the solid-solid phase transition and increasing the interconnect geometry (mass and volume) in the fuel cell. This developed technology will be tested using Hyper facility at NETL, Morgantown, to evaluate the performance in hybrid applications. Additionally, AK Supply and NETL will work on the development of a real-time, high temperature, intelligent micro-sensor for monitoring energy availability in the interconnect geometry. The will be used for control of stored energy release during load transients and will be tested on the NETL Hyper facility.

25 ENERGY STORAGE↗

'Advancement of KHPS to DOE TRL 7/8' Project - Final Technical Report

Final Report describing activities performed under the 'Advancement of the KHPS to DOE TRL 7/8' project, including the development of critical component test protocols, testing and analysis of the Gen5 KHPS main shaft seal, and continuing compliance work on approved operational environmental monitoring plans in anticipation of KHPS turbine installation at Verdant Power's Roosevelt Island Tidal Energy (RITE) Project site in New York, NY.

16 TIDAL AND WAVE POWER↗

Region Three Aerial Measurement System Flight Planning Tool - 12006

The Region 3 Aerial Measurement System Flight Planning Tool is used by the National Nuclear Security Agency (NNSA), United States Department of Energy, Radiological Assistance Program, Region 3, to respond to emergency radiological situations. The tool automates the flight planning package process while decreasing Aerial Measuring System response times and decreases the potential for human error. Deployment of the Region Three Aerial Measurement System Flight Planning Tool has resulted in an immediate improvement to the flight planning process in that time required for mission planning has been reduced from 1.5 hours to 15 minutes. Anecdotally, the RAP team reports that the rate of usable data acquired during surveys has improved from 40-60 percent to over 90 percent since they began using the tool. Though the primary product of the flight planning tool is a pdf format document for use by the aircraft flight crew, the RAP team has begun carrying their laptop computer on the aircraft during missions. By connecting a Global Positioning System (GPS) device to the laptop and using ESRI ArcMap's GPS tool bar to overlay the aircraft position directly on the flight plan in real time, the RAP team can evaluate and correct the aircraft position as the mission is executed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Apatite metaprism twist angle ({phi}) as a tool for crystallochemical diagnosis

[A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2} apatites can flexibly accommodate numerous cationic, metalloid and anionic substitutions. Using a combination of new refinements and published structures, this paper reviews correlations between substituent type and framework adaptation through adjustment of the A{sup I}O{sub 6} metaprism twist angle, {phi}. These systematics are illustrated through powder neutron diffraction refinement of the crystal chemistry of A{sub 10}(PO{sub 4}){sub 6}F{sub 2} (A=Ca, Sr) fluorapatites. Variations in {phi} reflect changes in the relative size of the A{sup I}{sub 4}(BO{sub 4}){sub 6} framework and A{sup II}{sub 6}X{sub 2} tunnel content and can be used to quantitatively assess the reliability of A{sup I}/A{sup II} cation partitioning coefficients determined by Rietveld analysis. In the simplest cases of bi-ionic substitution, the metaprism twist systematics conform to three principle trends (i) For A-type divalent substitution, the larger A{sup 2+} species preferentially enters the channel before partitioning to the framework. This leads to parabolic modification in {phi} across the compositional series; (ii) For B-type pentavalent compounds, the {phi} variation will be linear in accord with the relative B{sup 5+} ionic size; and (iii) For X-type substitution of halide anions, {phi} will be reduced as the average size increases. Departures from these trends may indicate polymorphism, compositional anomalies, A{sup I}/A{sup II} order disequilibrium, or poor structure refinement, and may be extended to chemically complex apatites with simultaneous substitutions over the A, B and X sites. - Graphical abstract: [A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2} apatites can flexibly accommodate numerous cationic, metalloid and anionic substitutions. Using a combination of new refinements and published structures, this paper reviews correlations between substituent type and framework adaptation through adjustment of the A{sup I}O{sub 6} metaprism twist angle, {phi}. Highlights: > We use new refinements and published structures to understand adjustment of apatite A{sup I}O{sub 6} metaprism twist angle, {phi} (c.f. [A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2}). > For A-type divalent substitution, the larger A{sup 2+} species preferentially enters the channel before partitioning to the framework; hence parabolic modification in {phi}. > For B-type pentavalent compounds, the {phi} variation will be linear in accord with the relative B{sup 5+} ionic size. > For X-type substitution of halide anions, {phi} will be reduced as the average size increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Eagle-Picher SPV development

The topics covered are presented in viewgraph form and include the following: Eagle-Picher heritage - single pressure vessel (SPV) technology; SPV units in process at Eagle-Pitcher; design features; basic battery design features; cell development considerations; SPV boiler plate cell; cell development activity; SPV cell capacity test - charge and discharge; and current plans.

Brill, Jack↗