Search NASA⌕ Search

Engineering topics

Smith, S. R.

Publications and source records attributed to Smith, S. R..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Use of data description languages in the interchange of data

The Consultative Committee for Space Data Systems (CCSDS) is developing Standards for the interchange of information between systems, including those operating under different environments. The objective is to perform the interchange automatically, i.e. in a computer interpretable manner. One aspect of the concept developed by CCSDS is the use of a separate data description to specify the data being transferred. Using the description, data can then be automatically parsed by the receiving computer. With a suitably expressive Data Description Language (DDL), data formats of arbitrary complexity can be handled. The advantages of this approach are: (1) that the description need only be written and distributed once to all users, and (2) new software does not need to be written for each new format, provided generic tools are available to support writing and interpretation of descriptions and the associated data instances. Consequently, the effort of 'hard coding' each new format is avoided and problems of integrating multiple implementations of a given format by different users are avoided. The approach is applicable in any context where computer parsable description of data could enhance efficiency (e.g. within a spacecraft control system, a data delivery system or an archive). The CCSDS have identified several candidate DDL's: EAST (Extended Ada Subset), TSDN (Transfer Syntax Data Notation) and MADEL (Modified ASN.1 as a Data Description Language -- a DDL based on the Abstract Syntax Notation One - ASN.1 - specified in the ISO/IEC 8824). This paper concentrates on ESA's development of MADEL. ESA have also developed a 'proof of concept' prototype of the required support tools, implemented on a PC under MS-DOS, which has successfully demonstrated the feasibility of the approach, including the capability within an application of retrieving and displaying particular data elements, given its MADEL description (i.e. a data description written in MADEL). This paper outlines the work done to date and assesses the applicability of this modified ASN.1 as a DDL. The feasibility of the approach is illustrated with several examples.

Pignede, M.↗
NASA NTRS1991

Calculation of Gallium-metal-Arsenic phase diagrams

Electrical contacts and metallization to GaAs solar cells must survive at high temperatures for several minutes under specific mission scenarios. The determination of which metallizations or alloy systems that are able to withstand extreme thermal excursions with minimum degradation to solar cell performance can be predicted by properly calculated temperature constitution phase diagrams. A method for calculating a ternary diagram and its three constituent binary phase diagrams is briefly outlined and ternary phase diagrams for three Ga-As-X alloy systems are presented. Free energy functions of the liquid and solid phase are approximated by the regular solution theory. Phase diagrams calculated using this method are presented for the Ga-As-Ge and Ga-As-Ag systems.

Scofield, J. D.↗
NASA NTRS1991

Phase equilibrium modeling for high temperature metallization on GaAs solar cells

Recent trends in performance specifications and functional requirements have brought about the need for high temperature metallization technology to be developed for survivable DOD space systems and to enhance solar cell reliability. The temperature constitution phase diagrams of selected binary and ternary systems were reviewed to determine the temperature and type of phase transformation present in the alloy systems. Of paramount interest are the liquid-solid and solid-solid transformations. Data are being utilized to aid in the selection of electrical contact materials to gallium arsenide solar cells. Published data on the phase diagrams for binary systems is readily available. However, information for ternary systems is limited. A computer model is being developed which will enable the phase equilibrium predictions for ternary systems where experimental data is lacking.

Chung, M. A.↗
NASA NTRS1984

Simulating Atmospheric Turbulence

Dimensionless time series for gusts and gradients calculated with model. Single-sided one-dimensional spectra obtained from Fourier analysis of simulated vertical gust. Each of four plots represents spectrum in one of four altitude bands ranging from 0 to 10 km. Model differs from most models; is nondimensional for greater generality and uses spectra with finite wave number limits. Developed to predict effects of atmospheric turbulence in horizontal and near-horizontal flight also applicable to commercial aviation.

Tatom, F. B.↗
NASA NTRS1982

Advanced Space Shuttle simulation model

The effects of atmospheric turbulence in horizontal and near-horizontal flight during the return of the Space Shuttle are important for determining design, control, and pilot-in-the-loop effects. A nonrecursive model (based on vonKarman spectra) for atmospheric turbulence along the flight path of the Shuttle Orbiter has been developed which provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity and also for simulation of instantaneous gust gradients. Based on this model the time series for gusts and gust gradients have been generated and stored on a series of magnetic tapes which are entitled Shuttle Simulation Turbulence Tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 120,000 meters. A description of the turbulence generation procedure is provided, the results of validating the simulated turbulence are described, and conclusions and recommendations are presented. Appendices provide tabulated one-dimensional vonKarman spectra, a discussion of the minimum frequency simulated, and the results of spectral and statistical analyses of the SSTT.

Tatom, F. B.↗
NASA NTRS1982

Advanced Space Shuttle simulation model

A non-recursive model (based on von Karman spectra) for atmospheric turbulence along the flight path of the shuttle orbiter was developed. It provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity, and also for simulation of instantaneous gusts gradients. Based on this model the time series for both gusts and gust gradients were generated and stored on a series of magnetic tapes, entitled Shuttle Simulation Turbulence Tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 120,000 meters. A description of the turbulence generation procedure is provided. The results of validating the simulated turbulence are described. Conclusions and recommendations are presented. One-dimensional von Karman spectra are tabulated, while a discussion of the minimum frequency simulated is provided. The results of spectral and statistical analyses of the SSTT are presented.

Tatom, F. B.↗
NASA NTRS1981

Advanced Shuttle Simulation Turbulence Tapes (SSTT) users guide

A nonrecursive model (based on von Karman spectra) for atmospheric turbulence along the flight path of the shuttle orbiter was developed which provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity and also for simulation of instantaneous gust gradients. Based on this model, the time series for both gusts and gust gradients was generated and stored on a series of magnetic tapes which are entitled shuttle simulation turbulence tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 120,000 meters. An appropriate description of the characteristics of the simulated turbulence stored on the tapes, as well as instructions regarding their proper use are provided. The characteristics of the turbulence series, including the spectral shape, cutoff frequencies, and variation of turbulence parameters with altitude, are discussed. Information regarding the tapes and their use is presented. Appendices provide results of spectral and statistical analyses of the SSTT and examples of how the SSTT should be used.

Tatom, F. B.↗
NASA NTRS1981

Simulation of atmospheric turbulent gusts and gust gradients

An improved three-dimensional, nonrecursive model for atmospheric turbulence has been developed which provides for simulation of both instantaneous gusts and gust gradients along the flight path of the Space Shuttle. The one-dimensional gust and gust gradient spectral models, which form the basis for the simulation scheme, are developed from three-dimensional, von Karman spectra, integrated over finite limits based on the characteristic dimensions (length, width, and thickness) of the flight vehicle. By means of the simulation process nondimensional time series for both gusts and gust gradients have been generated and stored on a series of magnetic tapes for four altitude bands ranging from 0 to 10,000 meters. These Shuttle Simulated Turbulence Tapes (SSTT) have been validated by means of spectral and statistical analyses with satisfactory results. The dimensionless form of the time series coupled with the use of a von Karman spectral model (as opposed to a Dryden model) distinguish the SSTT from earlier turbulence simulation concepts.

Tatom, F. B.↗
NASA NTRS1980

Space shuttle simulation model

The effects of atmospheric turbulence in both horizontal and near horizontal flight, during the return of the space shuttle, are important for determining design, control, and 'pilot-in-the-loop' effects. A nonrecursive model (based on von Karman spectra) for atmospheric turbulence along the flight path of the shuttle orbiter was developed which provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity, and also for simulation of instantaneous gust gradients. Based on this model, the time series for both gusts and gust gradients were generated and stored on a series of magnetic tapes which are entitled shuttle simulation turbulence tapes (SSTT). The time series are designed to represent atmospheric turbulence from ground level to an altitude of 10,000 meters. The turbulence generation procedure is described as well as the results of validating the simulated turbulence. Conclusions and recommendations are presented and references cited. The tabulated one dimensional von Karman spectra and the results of spectral and statistical analyses of the SSTT are contained in the appendix.

Tatom, F. B.↗
NASA NTRS1980

ESCA study of oxidation and hot corrosion of nickel-base superalloys

A study of the high-temperature oxidation and Na2SO4-induced hot corrosion of nickel-base superalloys has been accomplished by using ESCA to determine the surface composition of the oxidized or corroded samples. Oxidation was carried out at 900 or 1000 C in slowly flowing O2 for samples of B-1900, NASA-TRW VIA, 713C, and IN-738. Hot corrosion of B-1900 was induced by applying a coating of Na2SO4 to preoxidized samples, then heating to 900 C in slowly flowing O2. For oxidized samples, the predominant type of scale formed by each superalloy showed a marked surface enrichment of Ti. For corroded samples, the transfer of significant amounts of material from the oxide layer to the surface of the salt layer was observed before the onset of rapidly accelerating weight gain. Marked changes in surface composition coincided with the beginning of accelerating corrosion, the most striking of which were a tenfold decrease in the sulfur to sodium ratio and an increase in the Cr(VI) to Cr(III) ratio.

Smith, S. R.↗
NASA NTRS1980

Verification of interim simulated atmospheric turbulence

During horizontal and near-horizontal flight of the space shuttle orbiter, the effects of atmospheric turbulence on the vehicle are crucial in establishing the space shuttle design, control, and human pilot effects. The effects of both turbulent gusts and gust gradients (shears) must be taken into account. By means of a nonrecursive turbulence simulation model, twelve simulated turbulence time series for gusts and gust gradients were generated as part of a previous investigation. The current investigation was concerned with the spectral analysis of the time series based on the use of Fourier transform theory. A comparison between the computed spectra and the corresponding von Karman theoretical spectra is also included. A basic difference is explained between the computed and theoretical spectra which was identified as a result of the comparison. Conclusions and recommendations are presented.

Tatom, F. B.↗
NASA NTRS1980

Curvilinear grids for sinuous river channels

In order to effectively analyze the flow in sinuous river channels, a curvilinear grid system was developed for use in the appropriate hydrodynamic code. The CENTERLINE program was designed to generate a two dimensional grid for this purpose. The Cartesian coordinates of a series of points along the boundaries of the sinuous channel represent the primary input to CENTERLINE. The program calculates the location of the river centerline, the distance downstream along the centerline, and both radius of curvature and channel width as a function of such distance downstream. These parameters form the basis for the generation of the curvilinear grid. Based on input values for longitudinal and lateral grid spacing, the corresponding grid system is generated and a file is created containing the appropriate parameters for use in the associated explicit finite difference hydrodynamic programs. Because of the option for a nonuniform grid, grid spacing can be concentrated in areas containing the largest flow gradients.

Tatom, F. B.↗
NASA NTRS1979

Atmospheric turbulence simulation for Shuttle orbiter

An improved non-recursive model for atmospheric turbulence along the flight path of the Shuttle Orbiter is developed which provides for simulation of instantaneous vertical and horizontal gusts at the vehicle center-of-gravity, and also for simulation of instantaneous gust gradients. Based on this model the time series for both gusts and gust gradients are generated and stored on a series of magnetic tapes. Section 2 provides a description of the various technical considerations associated with the turbulence simulation model. Included in this section are descriptions of the digital filter simulation model, the von Karman spectra with finite upper limits, and the final non recursive turbulence simulation model which was used to generate the time series. Section 2 provides a description of the various technical considerations associated with the turbulence simulation model. Included in this section are descriptions of the digial filter simulation model, the von Karman spectra with finite upper limits, and the final non recursive turbulence simulation model which was used to generate the time series. Section 3 provides a description of the time series as currently recorded on magnetic tape. Conclusions and recommendations are presented in Section 4.

Tatom, F. B.↗
NASA NTRS1979

X-ray photoelectron spectroscopy study of nickel and nickel-base alloy surface alterations in simulated hot corrosion conditions with emphasis on eventual application to turbine blade corrosion

Research on the high temperature oxidation and Na2SO4 induced hot corrosion of some nickel base superalloys was accomplished by using ESCA to determine the surface composition of the oxidized or corroded samples. Oxidation was carried out at 900 or 1000 C in slowly flowing O2 for samples of B-1900, NASA-TRW VIA, 713C, and IN-738. Oxidation times ranged from 0.5 to 100 hr. Hot corrosion of B-1900 was induced applying a coating of Na2SO4 to peroxidized samples, the heating to 900 C in slowly flowing O2. For oxidized samples, the predominant type of scale formed by each superalloy was determined, and a marked surface enrichment of Ti was found in each case. For corroded samples, the transfer of significant amounts of material from the oxide layer to the surface of the salt layer was observed to occur long before the onset of accelerating weight-gain. Changes in surface composition were observed to coincide with the beginning of accelerating corrosion, the most striking of which was a tenfold decrease in the sulfur to sodium ration and an increase in the Cr(VI) ratio.

Mateescu, G. D.↗
NASA NTRS1977

Environment effects from SRB exhaust effluents: Technique development and preliminary assessment

Techniques to determine the environmental effects from the space shuttle SRB (Solid Rocket Booster) exhaust effluents are used to perform a preliminary climatological assessment. The exhaust effluent chemistry study was performed and the exhaust effluent species were determined. A reasonable exhaust particle size distribution is constructed for use in nozzle analyses and for the deposition model. The preliminary assessment is used to identify problems that are associated with the full-scale assessment; therefore, these preliminary air quality results are used with caution in drawing conclusion regarding the environmental effects of the space shuttle exhaust effluents.

Goldford, A. I.↗
NASA NTRS1974

Applications Explorer Missions (AEM): Mission planners handbook

The Applications Explorer Missions (AEM) Program is a planned series of space applications missions whose purpose is to perform various tasks that require a low cost, quick reaction, small spacecraft in a dedicated orbit. The Heat Capacity Mapping Mission (HCMM) is the first mission of this series. The spacecraft described in this document was conceived to support a variety of applications instruments and the HCMM instrument in particular. The maximum use of commonality has been achieved. That is, all of the subsystems employed are taken directly or modified from other programs such as IUE, IMP, RAE, and Nimbus. The result is a small versatile spacecraft. The purpose of this document, the AEM Mission Planners Handbook (AEM/MPH) is to describe the spacecraft and its capabilities in general and the HCMM in particular. This document will also serve as a guide for potential users as to the capabilities of the AEM spacecraft and its achievable orbits. It should enable each potential user to determine the suitability of the AEM concept to his mission.

Smith, S. R.↗