Engineering topics

Smith, Steven M.

Publications and source records attributed to Smith, Steven M..

3 records

DOE OSTI2024

Unlocking aquifer sustainability through irrigator-driven groundwater conservation

Groundwater depletion caused by intensive pumping for irrigated agriculture is a global threat to economies, food security, and ecosystems. Pumping reductions are required to confront this threat, but their implementation is a “wicked” problem due to interlinked hydrological, social, and economic factors. In the US High Plains Aquifer, an irrigator-led conservation effort known as the Sheridan 6 Local Enhanced Management Area (SD-6 LEMA) is a rare example of successful collective action in agricultural-groundwater systems. In its first decade, the area has exceeded water use reduction goals and decreased depletion rates by over 50% without significantly affecting net income. In this Perspective, we highlight factors underlying the SD-6 LEMA’s effectiveness, and identify transferable governance tenets for other groundwater dependent regions striving for sustainable management of groundwater resources. These tenets include flexibility through multi-year allocations, regulatory oversight to support the irrigators’ plans, and a strong scientific foundation for sustainable agricultural-groundwater systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Final-stage densification kinetics of direct current–sinteredZrB2

Final-stage sintering was analyzed for nominally phase pure zirconium diboride synthesized by borothermal reduction of high-purity ZrO2. Analysis was conducted on ZrB2 ceramics with relative densities greater than 90% using the Nabarro–Herring stress–directed vacancy diffusion model. Temperatures of 1900°C or above and an applied uniaxial pressure of 50 MPa were required to fully densify ZrB2 ceramics by direct current sintering. Ram travel data were collected and used to determine the relative density of the specimens during sintering. Specimens sintered between 1900 and 2100°C achieved relative densities greater than 97%, whereas specimens sintered below 1900°C failed to reach the final stage of sintering. The average grain size ranged from 1.0 to 14.7 μm. The activation energy was calculated from the slope of an Arrhenius plot that used the Kalish equation. The activation energy was 162 ± 34 kJ/mol, which is consistent with the activation energy for dislocation movement in ZrB2. The diffusion coefficients for dislocation motion that controls densification were 5.1 × 10−6 cm2/s at 1900°C and 5.1 × 10−5 cm2/s at 2100°C, as calculated from activation energy and average grain sizes. This study provides evidence that the dominant mechanism for final-stage sintering of ZrB2 ceramics is dislocation motion.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Pressureless sintering of dual-phase, high-entropy boride–carbide ceramics

Here, dual-phase, high-entropy boride–carbide ceramics were densified by pressureless sintering. Relative densities up to approximately 96% were obtained for ceramics containing about 30 vol% high-entropy boride and 70 vol% high-entropy carbide. Isostatic pressing at 200 MPa resulted in higher relative densities of both the green bodies and final ceramics compared to uniaxial pressing. The highest relative density of 96.3% was achieved for a ceramic that was isostatically pressed at 200 MPa and sintered at 2300°C for 2 h. Grain sizes of the resulting ceramics were approximately 2 µm. This is the first report of pressureless sintering of dual-phase, high-entropy boride–carbide ceramics.

36 MATERIALS SCIENCE↗