Search NASA⌕ Search

Engineering topics

Smoljan, Courtney S.

Publications and source records attributed to Smoljan, Courtney S..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Titanium-Based Metal–Organic Framework For Tandem Metallaphotocatalysis

Metal–organic frameworks (MOFs) have garnered substantial attention for their unique properties, such as high porosity and tunable structures, making them versatile for various applications. This paper constructs photoactive titanium–organic frameworks by combining Ti(IV) clusters and a bipyridine linker. The MOF is synthesized in situ through imine condensation, resulting in NU-2300. Subsequent ex situ nickel salt complexation results in NU-2300-Ni, which is then used for light-mediated carbon–heteroatom cross-couplings. The photophysical properties of the metallaphotocatalyst were investigated by UV-vis and EPR analysis, and both the Ti cluster and the bipyridine linker were found to contribute to successful catalysis, making it a tandem catalyst. The heterogeneous material retained its performance through five cycles of thioetherification. As a result, this work contributes not only to MOF synthetic strategies, but also to expanding MOF applications as recyclable, tandem metallaphotocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Constraining Flexibility in the MIL-88 Topology through Integration of 3-Dimensional Linkers

Metal–organic frameworks (MOFs) are a class of crystalline, nanoporous materials that are recognized for their tunability. While some MOFs demonstrate flexibility, this characteristic can pose challenges in achieving precise pore control or establishing permanent porosity. Specifically, MIL-88B, is notable for its high flexibility, as it is constructed from metal trimer clusters and 2-dimensional linkers (2DLs) featuring planar, aromatic cores, allowing significant structural changes. In this study, we synthesized two new MOFs, NU-2010 and NU-2011, which are structurally analogous to MIL-88B but incorporate ditopic 3-dimensional linkers (3DLs) with sterically bulky cores and higher symmetry. Our aim was to investigate whether the introduction of 3DLs could mitigate the flexibility observed in MIL-88B. We employed a combination of single crystal and powder X-ray diffraction techniques to assess the flexibility of MIL-88B, NU-2010, and NU-2011 under various conditions including thermal activation, solvent exchange, and temperature changes. Furthermore, our findings indicate that incorporating 3DLs significantly reduces framework flexibility in NU-2010 and NU-2011 relative to MIL-88B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Investigating the mechanical stability of flexible metal–organic frameworks

As we continue to develop metal–organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (<1 GPa) using a synchrotron source on two families of flexible MOFs: (i) NU-1400 and NU-1401, and (ii) MIL-88B, MIL-88B-(CH 3 ) 2 , and MIL-88B-(CH 3 ) 4 . In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Expanding Linker Dimensionality in Metal‐organic Frameworks for sub‐Ångstrom Pore Control for Separation Applications

Abstract Metal‐organic frameworks (MOFs) are a class of porous materials with high surface areas, which are acquiring rapid attention on an exponential basis. A significant characteristic of MOFs is their ability to act as adsorbents to selectively separate component mixtures of similar size, thereby addressing the technological need for an alternative approach to conventional distillation methods. Recently, MOFs comprising a 3‐Dimensional (3D) linker have shown outstanding capabilities for difficult separations compared to the parent 2‐Dimensional (2D) analogue. 3D‐linkers with a polycyclic core are underrepresented in the MOF database due to the widespread preferred use of 2D‐linkers and the misconceived high‐cost of 3D linkers. We summarize the recent research of 3D‐linker MOFs and highlight their beneficial employment for selective gas and hydrocarbon adsorption and separation. Furthermore, we outline forecasts in this area to create a platform for widespread adoption of 3D‐linkers in MOF synthesis.

Macreadie, Lauren K.↗
DOE OSTI2023

Expanding Linker Dimensionality in Metal‐organic Frameworks for sub‐Ångstrom Pore Control for Separation Applications

Abstract Metal‐organic frameworks (MOFs) are a class of porous materials with high surface areas, which are acquiring rapid attention on an exponential basis. A significant characteristic of MOFs is their ability to act as adsorbents to selectively separate component mixtures of similar size, thereby addressing the technological need for an alternative approach to conventional distillation methods. Recently, MOFs comprising a 3‐Dimensional (3D) linker have shown outstanding capabilities for difficult separations compared to the parent 2‐Dimensional (2D) analogue. 3D‐linkers with a polycyclic core are underrepresented in the MOF database due to the widespread preferred use of 2D‐linkers and the misconceived high‐cost of 3D linkers. We summarize the recent research of 3D‐linker MOFs and highlight their beneficial employment for selective gas and hydrocarbon adsorption and separation. Furthermore, we outline forecasts in this area to create a platform for widespread adoption of 3D‐linkers in MOF synthesis.

Macreadie, Lauren K.↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Abstract Metal–organic frameworks (MOFs) have been proposed as a promising material for non‐thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc‐based MOF containing a three‐dimensional (3D) linker, bicyclo[2.2.2]octane‐1,4‐dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well‐defined pore apertures/channels with sub‐Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi‐component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn‐based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

Lal, Bhajan↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Metal–organic frameworks (MOFs) have been proposed as a promising material for non-thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc-based MOF containing a three-dimensional (3D) linker, bicyclo[2.2.2]octane-1,4-dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well-defined pore apertures/channels with sub-Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi-component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn-based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of Al:Si and (Al+Na):Si ratios on the static corrosion of sodium‐boroaluminosilicate glasses

Abstract Understanding alteration mechanisms of borosilicate glasses in aqueous media is essential to nuclear waste performance assessments to ensure radioisotopes are contained for extended durations. Aluminum is typically added to glass compositions to reduce the extent of alteration. However, previous work on 7‐day durability tests has suggested that Al has a nonlinear relationship with extent of alteration. The effects of Al:Si and (Al+Na):Si substitutions on glass durability were evaluated using series of glasses based on the International Simple Glass corroded in static conditions up to 13 months in deionized water at 90°C. The alteration behavior was determined by measurement of element release in solution. The ⁓7‐day alteration trends across the series were consistent with predicted trends. The 13‐month results indicated overall alteration decreased as Al:Si ratios increased and was unaffected by changes in (Al+Na):Si except for the glass with the highest (Al+Na):Si ratio (ISG‐A23N), which completely altered within 14 days. Frequent sampling and in situ Raman measurements of solutions revealed ISG‐A23N experienced several distinguishable alteration rate regimes within 7 days, forming a ⁓100 µm alteration layer and a NaSiAlO 4 zeolite.

Reiser, Joelle T.↗
DOE OSTI2021

Plasma ammonia synthesis over mesoporous silica SBA-15

Herein we demonstrate the synthesis of ammonia via atmospheric DBD plasma discharge over silica. We evaluated the performance of three structural different silicas: non-porous silica, fumed-silica and mesoporous SBA-15 silica. The mesoporous SBA-15 sample resulted in an ammonia synthesis rate per gram of catalyst at least 3 times higher than that of the non-porous and fumed silica when employing a hydrogen rich gas feed. The hierarchical ordered pore size in the mesoporous range of SBA-15 allowed us to observe experimentally, the pore size effect in the plasma discharge. Specifically, the ammonia production is enhanced by the presence of mesopores that can effectively enable the discharge diffusion into the pore as predicted by theoretical calculations. The importance of the porous structure was confirmed by optical emission spectra which indicates a similarity on the relative intensity on the main plasma activated species in the gas phase such as N2+, NH and H_α for the three silicas employed in this work i.e., non-porous, fumed and mesoporous (SBA-15). Furthermore, the remarkable ammonia production when employing the SBA-15 shows that despite the similarities in the gas phase the main differences might be attributed to the diffusion of the plasma discharge into the pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗