Search NASA⌕ Search

Engineering topics

Soignard, Emmanuel

Publications and source records attributed to Soignard, Emmanuel.

Pressure-Driven Chemical Disorder in Glassy As 2 S 3 up to 14.7 GPa, Postdensification Effects, and Applications in Materials Design

A small difference in energy between homopolar and heteropolar bonds and the glass-forming ability of pure chalcogens leads to unexpected trends in densification mechanisms of glassy chalcogenides compared to vitreous oxides. Using high-precision compressibility measurements and in situ high-energy X-ray diffraction up to 14.7 GPa, we show herein a new densification route in a canonical glass As 2 S 3 . After the first reversible elastic step with a maximum pressure of 1.3 GPa, characterized by a strong reduction of voids and cavities, a significant bonding or chemical disorder is developed under higher pressure, reaching a saturation of 30% in the population of As-As bonds above 8-9 GPa. The pressure-driven chemical disorder is accompanied by a remarkable structural relaxation and a strongly diminished optical gap and determines structural, vibrational, and optical properties under and after cold compression. The decompressed recovered glass conserves a dark color and exhibits two relaxation processes: (a) fast (a few days) and (b) slow (months/years at room temperature). The enhanced refractive index of the recovered glass is promising for optical applications with improved functionalities. A nearly permanent red shift in optical absorption after decompression can be used in high-impact-force optical sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intermediate range order in supercooled water

The temperature dependence of the heights of the first and second x-ray diffraction peaks in supercooled water measured down to 244 K are found to display very different behaviours. While the first peak intensity remains essentially constant, the second peak increases strongly with decreasing temperature. In real space this is concomitant with the reduction of the number of non-bonded interstitial molecules between the first and second shells. It is found that although the first O-O shell in supercooled water is unchanged upon supercooling, the variations in intermediate range order are mainly associated with the growth of a predominantly tetrahedral network that is distinctly different from ice-Ih. Moreover, in this temperature regime we find a direct correlation between the height of the second diffraction peak and the intensity changes in the 2nd, 3rd, 4th and 5th peaks in the oxygen-oxygen pair distribution function.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reversible elastic deformation of functionalized sp{sup 2} carbon at pressures of up to 33 GPa

We show that sp{sup 2} carbon bonded to silicon and oxygen can withstand reversible elastic deformation at pressures of up to 33 GPa. These experiments were carried out in a diamond anvil cell. In-situ Raman spectroscopy was employed to record the reversibility of elastic deformation by measuring the movement in the D and G peaks of carbon. Above 33 GPa the material, a silicon oxycarbide, transforms into an unidentified state which is retained upon unloading down to ambient pressure. Thermodynamical analysis suggests that the material could have transformed into a crystalline state at these ultrahigh pressures, driven by mechanical work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cell assemblies for reproducible multi-anvil experiments (the COMPRES assemblies)

The multi-anvil high-pressure technique is an important tool in high-pressure mineralogy and petrology, as well as in chemical synthesis, allowing the treatment of large (millimeter-size) samples of minerals, rocks, and other materials at pressures of a few GPa to over 25 GPa and simultaneous uniform temperatures up to 2500 C and higher. A series of cell assemblies specially designed and implemented for interlaboratory use are described here. In terms of the size of the pressure medium and the anvil truncation size, the five sizes of assemblies developed here are an 8/3, 10/5, 14/8, 18/12, and 25/15 assembly. As of this writing, these assemblies are in widespread use at many laboratories. The details of design, construction, and materials developed or used for the assemblies are presented here.

58 GEOSCIENCES↗

A perforated diamond anvil cell for high-energy x-ray diffraction of liquids and amorphous solids at high pressure

Diamond anvil cells (DACs) are widely used for the study of materials at high pressure. The typical diamonds used are between 1 and 3 mm thick, while the sample contained within the opposing diamonds is often just a few microns in thickness. Hence, any absorbance or scattering from diamond can cause a significant background or interference when probing a sample in a DAC. By perforating the diamond to within 50-100 {micro}m of the sample, the amount of diamond and the resulting background or interference can be dramatically reduced. The DAC presented in this article is designed to study amorphous materials at high pressure using high-energy x-ray scattering (>60 keV) using laser-perforated diamonds. A small diameter perforation maintains structural integrity and has allowed us to reach pressures >50 GPa, while dramatically decreasing the intensity of the x-ray diffraction background (primarily Compton scattering) when compared to studies using solid diamonds. This cell design allows us for the first time measurement of x-ray scattering from light (low Z) amorphous materials. Here, we present data for two examples using the described DAC with one and two perforated diamond geometries for the high-pressure structural studies of SiO{sub 2} glass and B{sub 2}O{sub 3} glass.

36 MATERIALS SCIENCE↗