Search NASA⌕ Search

Engineering topics

Song, Yang

Publications and source records attributed to Song, Yang.

At least 109 records · Page 6

Pressure-Induced Polymorphic, Optical, and Electronic Transitions of Formamidinium Lead Iodide Perovskite

Formamidinium lead iodide (FAPbI 3 ) perovskite as a superior solar cell material was investigated in two polymorphs at high pressures using in situ synchrotron X-ray diffraction, FTIR spectroscopy, photoluminescence (PL) spectroscopy, electrical conductivity (EC) measurements, and ab initio calculations. We identified two new structures (i.e., Imm2 and Immm) for α-FAPbI 3 but only a structural distortion (in C2/c) for δ-FAPbI 3 upon compression. A pressure-enhanced hydrogen bond plays a prominent role in structural modifications, as corroborated by FTIR spectroscopy. PL measurements and calculations consistently show the structure and pressure dependences of the band gap energies. Lastly, EC measurements reveal drastically different transport properties of α- and δ-FAPbI 3 at low pressures but a common trend to metallic states at high pressures. All of these observations suggest strongly contrasting structural stabilities and pressure-tuned optoelectric properties of the two FAPbI 3 polymorphs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox and plating electrode systems for an all-iron hybrid flow battery

A system for a flow cell for a hybrid flow battery, comprising: a redox plate comprising a plurality of electrolyte flow channels; conductive inserts attached to the redox plate between adjacent electrolyte flow channels; a redox electrode attached to a surface of the redox plate; a plating electrode, comprising: a plurality of folded fins with an oscillating cross-section, the plurality of folded fins comprising: a first planar surface; a second planar surface, parallel to the first planar surface; a plurality of ridges intersecting the first and second planar surfaces such that the plurality of ridges divide the first planar surface into a first plurality of strips, and divide the second planar surface into a second plurality of strips; and a membrane barrier. In this way, the capacity and performance of hybrid flow batteries may be maximized, through decreasing the reaction kinetics, mass transport and ohmic resistance losses at both electrodes.

Evans, Craig↗

Polymer–Peptide Conjugates Disassemble Amyloid β Fibrils in a Molecular-Weight Dependent Manner

Amyloid aggregation and deposition are associated with many intractable human diseases. Although the inhibition of amyloid protein aggregation has been well-studied, the disaggregation and dissolution of existing amyloid fibrils is less known. Taking a fibrillar assembly of amyloid β (Aβ) peptide as the model system, in this paper we report multivalent polymer–peptide conjugates (mPPCs) that disassemble preformed Aβ fibrils into dispersible sub-100 nm structures. Atomic force microscopy and dynamic light scattering studies show that the disassembly rate of preformed Aβ fibrils is controlled by the molecular weight of mPPCs. Rate equations on fibril disappearance are deduced from a simple model, which indicate that the disassembly reaction is first-order in the concentration of Aβ fibrils and a pseudo-first-order reaction in the concentration of peptide moieties on mPPCs, respectively. We eliminate the possibility that the disassembly occurs by the association between mPPCs and Aβ monomer/oligomers based on circular dichroism and Thioflavin T fluorescence assays. It is mostly likely that the mPPCs disassemble Aβ fibrils through a direct interaction. Finally, the mPPCs may thus offer a general macromolecular design concept that breaks down existing amyloid fibrils in a predictable fashion.

60 APPLIED LIFE SCIENCES↗

Suppressing the spin relaxation of electrons in silicon

Uniaxial compressive strain along the [001] direction strongly suppresses the spin relaxation in silicon. When the strain level is large enough so that electrons are redistributed only in the two valleys along the strain axis, the dominant scattering mechanisms are quenched and electrons mainly experience intra-axis scattering processes (intravalley or intervalley scattering within valleys on the same crystal axis). In this work, we first derive the spin-flip matrix elements due to intra-axis electron scattering off impurities, and then provide a comprehensive model of the spin relaxation time due to all possible interactions of conduction-band electrons with impurities and phonons. We predict a nearly three orders of magnitude improvement in the spin relaxation time of ~10 19 cm -3 antimony-doped silicon (Si:Sb) at low temperatures.

36 MATERIALS SCIENCE↗

Method and system for rebalancing electrolytes in a redox flow battery system

A method of rebalancing electrolytes in a redox flow battery system comprises directing hydrogen gas generated on the negative side of the redox flow battery system to a catalyst surface, and fluidly contacting the hydrogen gas with an electrolyte comprising a metal ion at the catalyst surface, wherein the metal ion is chemically reduced by the hydrogen gas at the catalyst surface, and a state of charge of the electrolyte and pH of the electrolyte remain substantially balanced.

25 ENERGY STORAGE↗

Electrocatalytic Hydrogenation of Phenol over Platinum and Rhodium: Unexpected Temperature Effects Resolved

Both electrocatalytic hydrogenation (ECH) and thermal hydrogenation (TH) of phenol by Pt and Rh show a roll-over in rate with increasing temperature without changing the principal reaction pathways. The negative effect of temperature for aqueous-phase phenol H2 and electrocatalytic hydrogenation on Pt and Rh is deduced to be due to the unexpected buildup of dehydrogenated phenol adsorbates, which block active sites. Rates of ECH and TH increase similarly with increasing hydrogen chemical potential whether induced by applied potential or H2 pressure, both via increasing H coverage, and indirectly by removing site blockers, a very strong effect at high temperature. This enables unprecedented rates in the TH of phenol at these temperatures.

Electrocatalysis↗

High-Selectivity Electrochemical Conversion of CO 2 to Ethanol using a Copper Nanoparticle/N-Doped Graphene Electrode

Carbon dioxide is a pollutant, but also a potential carbon source provided an efficient means to convert it to useful products. Herein we report a nanostructured catalyst for the direct electrochemical reduction of dissolved CO 2 to ethanol with high Faradaic efficiency (63%) and high selectivity (84%). The catalyst is comprised of Cu nanoparticle on a highly textured, N-doped graphene film. Detailed electrochemical analysis and complementary DFT calculations indicate a novel mechanism in which multiple active sites, working sequentially, control the coupling of carbon monoxide radicals and mediate the subsequent electrochemical reduction to alcohol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Los Angeles megacity: a high-resolution land–atmosphere modelling system for urban CO 2 emissions

Megacities are major sources of anthropogenic fossil fuel CO 2 (FFCO 2 ) emissions. The spatial extents of these large urban systems cover areas of 10 000 km 2 or more with complex topography and changing landscapes. We present a high-resolution land–atmosphere modelling system for urban CO 2 emissions over the Los Angeles (LA) megacity area. The Weather Research and Forecasting (WRF)-Chem model was coupled to a very high-resolution FFCO 2 emission product, Hestia-LA, to simulate atmospheric CO 2 concentrations across the LA megacity at spatial resolutions as fine as ~1 km. We evaluated multiple WRF configurations, selecting one that minimized errors in wind speed, wind direction, and boundary layer height as evaluated by its performance against meteorological data collected during the CalNex-LA campaign (May–June 2010). Our results show no significant difference between moderate-resolution (4 km) and high-resolution (1.3 km) simulations when evaluated against surface meteorological data, but the high-resolution configurations better resolved planetary boundary layer heights and vertical gradients in the horizontal mean winds. We coupled our WRF configuration with the Vulcan 2.2 (10 km resolution) and Hestia-LA (1.3 km resolution) fossil fuel CO 2 emission products to evaluate the impact of the spatial resolution of the CO 2 emission products and the meteorological transport model on the representation of spatiotemporal variability in simulated atmospheric CO 2 concentrations. We find that high spatial resolution in the fossil fuel CO 2 emissions is more important than in the atmospheric model to capture CO 2 concentration variability across the LA megacity. Finally, we present a novel approach that employs simultaneous correlations of the simulated atmospheric CO 2 fields to qualitatively evaluate the greenhouse gas measurement network over the LA megacity. Spatial correlations in the atmospheric CO 2 fields reflect the coverage of individual measurement sites when a statistically significant number of sites observe emissions from a specific source or location. We conclude that elevated atmospheric CO 2 concentrations over the LA megacity are composed of multiple fine-scale plumes rather than a single homogenous urban dome. Furthermore, we conclude that FFCO 2 emissions monitoring in the LA megacity requires FFCO 2 emissions modelling with ~1 km resolution because coarser-resolution emissions modelling tends to overestimate the observational constraints on the emissions estimates.

54 ENVIRONMENTAL SCIENCES↗

Highly efficient and selective pressure-assisted photon-induced polymerization of styrene

The polymerization process of condensed styrene to produce polystyrene as an industrially important polymeric material was investigated using a novel approach by combining external compression with ultraviolet radiation. The reaction evolution was monitored as a function of time and the reaction products were characterized by in situ Fourier transform infrared spectroscopy. By optimizing the loading pressures, we observed highly efficient and selective production of polystyrene of different tacticities. Specifically, at relatively low loading pressures, infrared spectra suggest that styrene monomers transform to amorphous atactic polystyrene (APS) with minor crystalline isotactic polystyrene. In contrast, APS was found to be the sole product when polymerization occurs at relatively higher loading pressures. The time-dependent reaction profiles allow the examination of the polymerization kinetics by analyzing the rate constant and activation volume as a function of pressure. As a result, an optimized pressure condition, which allows a barrierless reaction to proceed, was identified and attributed to the very desirable reaction yield and kinetics. Finally, the photoinitiated reaction mechanism and the growth geometry of the polymer chains were investigated from the energy diagram of styrene and by the topology analysis of the crystal styrene. This study shows strong promise to produce functional polymeric materials in a highly efficient and controlled manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHSalign: A Web Server That Builds upon Junction-Explorer and RNAJAG for Pairwise Alignment of RNA Secondary Structures with Coaxial Helical Stacking

RNA junctions are important structural elements of RNA molecules. They are formed when three or more helices come together in three-dimensional space. Recent studies have focused on the annotation and prediction of coaxial helical stacking (CHS) motifs within junctions. Here we exploit such predictions to develop an efficient alignment tool to handle RNA secondary structures with CHS motifs. Specifically, we build upon our Junction-Explorer software for predicting coaxial stacking and RNAJAG for modelling junction topologies as tree graphs to incorporate constrained tree matching and dynamic programming algorithms into a new method, called CHSalign, for aligning the secondary structures of RNA molecules containing CHS motifs. Thus, CHSalign is intended to be an efficient alignment tool for RNAs containing similar junctions. Experimental results based on thousands of alignments demonstrate that CHSalign can align two RNA secondary structures containing CHS motifs more accurately than other RNA secondary structure alignment tools. CHSalign yields a high score when aligning two RNA secondary structures with similar CHS motifs or helical arrangement patterns, and a low score otherwise. This new method has been implemented in a web server, and the program is also made freely available, at http://bioinformatics.njit.edu/CHSalign/.

59 BASIC BIOLOGICAL SCIENCES↗

Pressure-Induced Structural Transformations of ZnO Nanowires Probed by X-ray Diffraction

ZnO nanowires were investigated at high pressures of up to 27 GPa in situ in a diamond anvil cell using synchrotron X-ray diffraction. Upon compression, a wurtzite-to-rocksalt phase transformation was observed, but both the onset and the completion pressures of this transformation were enhanced compared with all previously studied morphologies of ZnO, including nanocrystals and their bulk counterparts. Upon decompression, the rocksalt phase was found to sustain at near ambient pressure and could be recovered in a significant amount. Moreover, the pressure-volume equations of state for both the wurtzite and the rocksalt phases indicate that their bulk moduli are significantly higher than those of bulk ZnO and nanocrystals. The SEM images of the ZnO nanowires both before and after the compression suggest the pressure-induced morphology modifications, corroborating the understanding of other structure and property evolutions with pressure. Finally, possible pressure-induced phase transition mechanisms were explored by examining the cell parameters and the internal structural parameter with pressures.

Dong, Zhaohui↗

Morphology- and lattice stability-dependent performance of nanostructured Li 4 Ti 5 O 12 probed by in situ high-pressure Raman spectroscopy and synchrotron X-ray diffraction

Nanostructured Li 4 Ti 5 O 12 (LTO) as a promising anode material in lithium-ion batteries (LIBs) has shown excellent yet morphology-dependent performance in LIB operations. However, the structural origin that influences the material performance at the microscopic level remains unclear. In this work, using combined in situ Raman spectroscopy and synchrotron X-ray diffraction, we comparatively investigated the structural stability of two nanostructured LTO materials with different morphologies by application of external pressure up to 27 GPa. In particular, nanoflower-like Li 4 Ti 5 O 12 spheres (LTO-1) and Li 4 Ti 5 O 12 nanoparticles (LTO-2) were subjected to high pressures using diamond anvil cells and their structural evolutions were characterized upon compression and decompression. Raman measurements show that both LTO materials undergo pressure-induced structural disorder but with different reversibilities upon decompression. X-ray results further confirmed the Raman measurements, and also allowed the quantitative analysis of pressure dependence of the crystal structures. Structural refinements of the diffraction patterns yield morphology-dependent bulk moduli of the two LTO materials, which reveal critical information about the intrinsic lattice strain and vacancies. These different structural characteristics, when compared with another spinel structure of lithiated titanium dioxide, allow the interpretation of the different performance between LTO-1 and LTO-2 for LIB operations. This study thus contributes to the understanding of the important factors that may influence the electrochemical performance and help with the design of new LTO-based anode materials for LIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗