Engineering topics
Publications and source records attributed to Sourav, Sagar.
Operando characterization reveals the structural dynamics of PtSn/SiO 2 catalysts, hinting at a Pt-rich surface configuration for optimal propane dehydrogenation performance.
The structure of supported MoO x /Al 2 O 3 catalysts is investigated using ab initio molecular dynamics (AIMD) and density-functional theory (DFT). Phase diagrams were computed to understand the hydroxylation coverage as a function of the temperature, H 2 O partial pressure, and MoO x loading. We relate the shifts in experimental Raman vibrational frequencies under hydrated conditions to hydrogen bonding interactions and the MoO x anchoring location. We showcase that the use of AIMD as a benchmark for DFT can provide insight into how, under certain hydrated conditions, DFT excels as an inexpensive method for computing vibrational frequencies, while, under dehydrated conditions, it is susceptible to the largest errors. Additionally, to facilitate the analysis of the hydroxyl region of experimental infrared spectra, we compute the power spectra of individual hydroxyls and see a strong relationship between OH stretching frequencies and the surrounding coordination environment, which are also impacted by anchored MoO x . Here, we compare computational and experimental IR and Raman spectra of catalysts synthesized herein under the same conditions.
Oxidative coupling of methane (OCM) is an attractive direct route for upgrading methane to valuable chemicals. In this study, Temporal Analysis of Products (TAP) and steady state experiments are conducted to understand the role of individual oxide phases and their combinations in supported Mn-Na 2 WO 4 /SiO 2 catalysts for OCM. The results from TAP transient kinetic studies indicate that Mn plays an important role in promoting gas phase oxygen activation, while NaO x /SiO 2 and WO x /SiO 2 are relatively inert towards gas phase oxygen and methane activation. However, the supported catalyst combining Na and W in the form Na 2 WO 4 show enhanced gas phase oxygen activation exhibiting a much lower oxygen activation energy (148 kJ/mol) and enhanced activity toward methane activation as compared to the individual supported oxide catalysts. Addition of Mn to Na 2 WO 4 /SiO 2 further decreases the oxygen activation energy by 40 kJ/mol. Moreover, methane activation is also enhanced with CH 3 as the main intermediate but, with increasing Mn content, more CH 2 intermediates are observed. Different forms of oxygen (both dioxygen and atomic) are detected on the catalyst surface using isotopic pump/probe pulsing and their distribution is found to depend on the catalyst composition. An optimal Mn content in the Na 2 WO 4 /SiO 2 catalyst system is needed to enhance the amount of dioxide surface species (e.g., superoxide 16 O 2 - or peroxide 16 O 2 2- ) associated with the Na 2 WO 4 leading to high C 2 selectivity for OCM. When the Mn content is too high, the larger MnOx domains are shown to contribute to the formation of higher concertation of monoxide surface species that lead to nonselective OCM pathways. This insight from transient kinetic characterization using TAP combined with conventional steady state studies, provides a deeper understanding of the role of individual oxide phases and their combination on supported catalysts toward the formation of intermediate surface species and their impact on the OCM reaction mechanism. This knowledge is critical toward designing superior catalyst formulations for OCM.
The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.
Oxidative coupling of methane (OCM) is a promising industrial process to upgrade natural gas to high value chemicals. In this study, Temporal Analysis of Products (TAP) and steady-state experiments were conducted to distinguish how the composition of surface and gas phase oxygen influence mechanistic details of the selective conversion of CH 4 to C 2 H 4 over the Mn-Na 2 WO 4 /SiO 2 catalyst. The results from TAP studies indicate that methane activation on this catalyst proceeds predominantly via a short-lived, transient surface oxygen species and there is a competition for this species to form either CO or methyl radicals on the surface. This active species has a total lifetime of 3 s and is identified to have a dioxygen (e.g. O 2 2- or O 2 -) form. We show that the concentration of the transient surface oxygen species significantly impacts the OCM performance. Oxygen attributed to the catalyst lattice (in a singular form e.g., O - ), is found to activate methane to a lesser degree, but exclusively forms CO 2 . Evidence for these surface pathways for methyl radical, CO and CO 2 formation identified by TAP are also validated through steady-state experiments. Finally, by distinguishing different catalyst oxygen species and their role in selective/nonselective pathways, important screening criteria have been identified for the advancement of superior catalyst formulations.
Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.
Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.