Search NASA⌕ Search

Engineering topics

Spencer, Michael

Publications and source records attributed to Spencer, Michael.

At least 19 records

Methods and compositions for microwave catalytic ammonia synthesis

In one aspect, the disclosure relates to relates to heterogeneous catalysts useful for the synthesis of ammonia under microwave irradiation, processes for preparing the disclosed heterogeneous catalysts, and processes for synthesizing ammonia using the heterogeneous catalysts with microwave irradiation. In various aspects, the disclosed heterogeneous catalysts comprise: a metal selected from Group 7, Group 8, Group 9, Group 10, Group 11, or combinations thereof; a metal oxide support; and optionally a promoter material. This abstract is intended as a scanning tool for purposes of searching in the particular art and is not intended to be limiting of the present disclosure.

Hu, Jianli↗

Reactions of Atomic Carbon with Butene Isomers: Implications for Molecular Growth in Carbon-Rich Environments

We carried out the product detection studies of C( 3 P) atom reactions with butene (C 4 H 8 ) isomers (but-1-ene, cis-but-2-ene, trans-but-2-ene) in a flow tube reactor at 353 K and 4 Torr under multiple collision conditions. Ground state carbon atoms are generated by 248 nm laser photolysis of tetrabromomethane, CBr 4 , in a buffer of helium. Thermalized reaction products are detected using synchrotron tunable VUV photoionization and time-of-flight mass spectrometry. The temporal profiles of the detected ions are used to discriminate products from side or secondary reactions. Furthermore, for the C( 3 P) + trans-but-2-ene and C( 3 P) + cis-but-2-ene reactions, various isomers of C 4 H 5 and C 5 H 7 are identified as reaction products formed via CH 3 and H elimination. Assuming equal ionization cross sections for all C 4 H 5 and C 5 H 7 isomers, C 4 H 5 :C 5 H 7 branching ratios of 0.63:1 and 0.60:1 are derived for the C( 3 P) + trans-but-2-ene and the C( 3 P) + cis-but-2-ene reactions, respectively. For the C( 3 P) + but-1-ene reaction, two reaction channels are observed: the H-elimination channel, leading to the formation of the ethylpropargyl isomer, and the C 3 H 3 + C 2 H 5 channel. Assuming equal ionization cross sections for ethylpropargyl and C 3 H 3 radicals, a branching ratio of 1:0.95 for the C 3 H 3 + C 2 H 5 and H + ethylpropargyl channels is derived. Finally, the experimental results are compared to previous H atom branching ratios and used to propose the most likely mechanisms for the reaction of ground state carbon atoms with butene isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Soil Moisture Active Passive (SMAP): Radar Measurements at High Latitudes and of Freeze/Thaw State

The Soil Moisture Active/Passive (SMAP) mission is scheduled for a late 2014 launch date. The mission will use both active radar and passive radiometer instruments at L-Band. In order to achieve a wide swath at sufficiently high resolution for both active and passive channels, an instrument architecture that uses a large rotating reflector is employed. In this paper, a focus will be places on the radar design and associated data products at high latitudes. The radar will employ synthetic-aperture processing to achieve a "moderate" resolution dual-pol product over a 1000 km swath. Because the radar is operating continuously, very frequent temporal coverage will be achieved at high latitudes. This data will be used, among other things, to produce a surface freeze/thaw state data product.

Earth observing↗

The Soil Moisture Active Passive (SMAP) Radar: Measurements at High Latitudes and of Surface Freeze/Thaw State

The Soil Moisture Active/Passive (SMAP) mission is scheduled for a late 2014 launch date. The mission will use both active radar and passive radiometer instruments at L-Band in order to achieve the science objectives of measuring soil moisture and land surface freeze-thaw state. To achieve requirements for a wide swath at sufficiently high resolution for both active and passive channels, an instrument architecture that uses a large rotating reflector is employed. In this paper, focus will be placed on the radar design. The radar will employ synthetic-aperture processing to achieve a "moderate" resolution dual-pol product over a 1000 km swath. Because the radar is operating continuously, very frequent temporal coverage will be achieved at high latitudes. This data will be used to produce a surface freeze/thaw state data product.

Spencer, Michael↗

NASA's Soil Moisture Active Passive (SMAP) Observatory

The SMAP mission will produce high-resolution and accurate global maps of soil moisture and its freeze/thaw state using data from a non-imaging synthetic aperture radar and a radiometer, both operating at L-band.

Kellogg, Kent↗

Radio Frequency Interference Mitigation for the Planned SMAP Radar and Radiometer

NASA's planned SMAP mission will utilize a radar operating in a band centered on 1.26 GHz and a co-observing radiometer operating at 1.41 GHz to measure surface soil moisture. Both the radar and radiometer sub-systems are susceptible to radio frequency interference (RFI). Any significant impact of such interference requires mitigation in order to avoid degradation in the SMAP science products. Studies of RFT detection and mitigation methods for both the radar and radiometer are continuing in order to assess the risk to mission products and to refine the performance achieved.

radiometer↗

RFI Mitigation and Detection for the SMAP Radar

The planned Soil Moisture Active Passive (SMAP) mission will use both active radar and passive radiometer instruments at L-Band to measure and monitor both soilmoisture and freeze/thaw state globally. The frequency band allocated for the SMAP radar is shared with the Global Navigation Satellite Systems and ground-basedradiolocation services. Signals from those users present significant sources of anthropogenic radio frequency interference (RFI) which contaminate the radarmeasurements. To mitigate RFI, the radar is designed with tunable operating frequency, which allows the center frequency to be tuned to avoid RFI. The filtering scheme in the receiver is configured to get a high level of RFI suppression. To meet the high accuracy measurement requirements, RFI detection and correction will be required during ground data processing. Some candidate algorithms have been evaluated, and they have been tested against simulated SMAP data derived from the PALSAR data.

Soil Moisture Active Passive (SMAP)↗