Search NASA⌕ Search

Engineering topics

Sperling, Joshua

Publications and source records attributed to Sperling, Joshua.

At least 19 records

Optimizing the location and configuration of disaster resilience hubs under transportation and electric power network failures

Natural disasters often result in failures of transportation network components and blackouts that imperil the wellbeing of vulnerable populations. In response to these events, resilience hubs have been proposed as a pre-disaster planning strategy to improve access to critical services. This paper introduces an optimization-based approach to locate and configure electric power-generating resilience hubs considering the possibility of failures in transportation and electric power systems. The model's objective is to identify hub locations and configurations that maximize transportation accessibility to the hubs and maximize the satisfaction of basic energy needs through hub-generated electric power. Besides a budget constraint, the model accounts for limits on the levels of hub energy generation vis-à-vis community energy demands, and on the transportation network distance of communities to hubs. Three heuristics are presented for the proposed planning problem. The first heuristic is a genetic algorithm (GA) with problem-specific solution generation procedures. The other two heuristics implement greedy search techniques. Numerical experiments were conducted, using data from rural Puerto Rico, to illustrate the application of the proposed model and heuristics, and examine their performance. In the numerical experiments, the GA heuristic found better solutions than the greedy heuristics. Additionally, design solutions consisting of spatially dispersed hubs with low energy generation capacity were better than solutions with spatially concentrated high-capacity hubs. Lastly, across a wide range of hub demand scenarios, only a small number of candidate hub locations consistently ranked among the best locations for establishing a hub.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fossil Fuel Transitions Framework: Case studies of the decision-making process for energy and economic development pathways

The Net Zero World Initiative leverages expertise across U.S. government agencies and the U.S. Department of Energy’s (DOE) national laboratories, in partnership with other governments and philanthropies, to accelerate the decarbonization of global energy systems. This whole-of-government approach supports countries committed to raising their climate ambitions by co-creating and implementing highly tailored, actionable technical and investment strategies that put just and sustainable net-zero solutions within reach. The Net Zero World Initiative enables country partners to harness the convening power and technical expertise of U.S. and international industry, think tanks, and technical institutions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Fossil Fuel Transitions Framework: Case Studies of the Decision-Making Process for Energy and Economic Development Pathways

Each community is unique, and transitions must be tailored to local and national contexts, with recognition that access to financing is a key differentiator between wealthy and low-to-middle income countries. This analysis examines six community fossil fuel transitions in two different country contexts to provide insights on inclusive processes and decision-making criteria that bring forth positive outcomes for the communities. In both the United States and Chile, a coordination mechanism is established across government agencies and the importance of stakeholder engagement is recognized. In many cases, the government, local community groups, and electric utility or industry players have a critical role in transition planning and support.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Virtual Community Trains

When access to transit solutions is restricted to parts of a community, a division occurs what leads to disadvantaged socioeconomic conditions that only grows over time. This restriction causes difficulties in accessing needed resources such as medical facilities, employment, healthy food, education, healthy food, and more. To solve this restricted access, Labyrinth Smart Mobility and partners are developing a virtual community train that encourages scalability, energy efficiency, and equitability to all regardless of individual circumstances and limitation. The implementation of virtual community trains allows access to resources previously out of reach. The virtual community train enables one operator to drive a lead vehicle. This lead vehicle would then provide direction to a follow vehicle through vehicle-to-vehicle communication. Labyrinth Smart Mobility in conjunction with partners used various methods and resources to prove market feasibility, technical feasibility, economic need and viability, and more as well as design system requirements and architecture emphasis efficiency and safety. In doing so, Labyrinth Smart Mobility and partners will continue these advancements to further develop the virtual community train.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Linking transportation agent-based model ($\mathrm{ABM}$) outputs with micro-urban social types ($\mathrm{MUSTs}$) via typology transfer for improved community relevance

The human relationship with transportation is shaped by social, economic, demographic, and urban form variables, or socio-spatial factors. The spatial dynamics of these are key to generating and interpreting outputs of transportation models that are most relevant for a community and the diverse mobility needs of its members. Here we present a typology transfer framework, grounded in socio-spatial dynamics shaping people's mobility, to take transportation-themed regional mobility model outcomes, in this case from two agent-based models (ABMs), and extrapolate them to other cities, with less time and resource intensity than new ABM development. The typology transfer process first identifies micro-urban social types (MUSTs) using socio-spatial factors, then defines city types based on spatial patterns of MUSTs to assess across which cities transfer results are likely to best hold. Lastly, a typology transfer multiplier matrix extrapolates a given variable, in our case the Mobility Energy Productivity (MEP) metric, to another city. The full process demonstration uses ABM results from Chicago (POLARIS model) and San Francisco (BEAM model), applying them to New York City. We discuss how MEP or other outputs can be appropriately estimated and used for integrated, human-centered mobility analysis. Key findings include that this MUST framework of user-defined dependent and independent variables allows tailoring ABM results and interpretations to specific community needs and data availability. Findings clarify that positive outcomes can be targeted towards user groups, based on sociospatial characteristics, using a typology approach, such as inclusive access to mobility choices, transportation affordability, and greater efficiency in resource use.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Pipe Parity Analysis of Seawater Desalination in the United States: Exploring Costs, Energy, and Reliability via Case Studies and Scenarios of Emerging Technology

As climate change-induced variables exacerbate water scarcities, the use of seawater reverse osmosis (SWRO) membrane desalination technology for treating seawater could potentially provide a long-term drought-proof source of drinking water. This study carried out a technoeconomic assessment (TEA) for three SWRO desalination plants in the U.S. and one in Israel to set baselines for the cost and energy consumption for seawater desalination. In addition, a breakeven curve for implementing SWRO desalination was estimated in relation to the cost of water conservation measures to meet drought-induced reduction of the traditional water supply. The results show that the cost of SWRO water production scales with the plant capacity while energy intensity is not dramatically different across the plants. The higher cost in some U.S. plants is due to high capital investment, including land acquisition and permitting. Variations in plant capacity utilization have the greatest impact on the levelized cost of water (LCOW) over the plant service life, suggesting the importance of reducing fouling and maintenance-related downtime. Scenario analysis of fixed labor cost reduction through process automation indicates investments in automation and sensing technology could result in long-term savings. Breakeven analysis shows the decision to adopt SWRO is highly dependent on the local cost associated with water conservation to meet water supply reduction. Moreover, a small reduction in SWRO cost can influence a shift toward the adoption of SWRO over water conservation measures. Incorporation of future water demand, water conservation potential, and water stress data around the nation indicates SWRO desalination could be an important contributor to the future municipal drinking water portfolio in the U.S.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A data-driven mobility–energy typology framework for New York State

Exploring multidimensional aspects of differences in technology adoption, travel, and vehicle ownership across settlement types can help inform energy-efficient and affordable mobility system goals. Concurrently, mapping key enablers, barriers, and risks for successfully meeting ambitious goals and targets (e.g. by geography, age, income, education, population density) offer important explanatory power as to context-specific challenges and opportunities. This paper explores how a highly geographically resolved understanding of social, economic, techno-infrastructural, environmental, and governance (SET EG) factors shape variations in technology adoption and associated mobility and energy outcomes in diverse communities of New York State, in terms of electric vehicle adoption rates, alternative commute mode choices, vehicles per household, and vehicle fuel economy. Results indicate the range of two to three times higher adoption rates for electric vehicles by more highly educated, wealthier, “Core Urban” populations relative to the other identified typologies, given the labels “Rural”, “Suburban”, and “Urban” populations. Additionally, commute mode choice is closely linked with population and employment density—more than 89% of Core Urbanites use transit or active modes, compared with just 26% and 18% of Suburban and Rural residents, respectively. Household vehicle ownership varies from approximately 1.9 vehicles per household in Rural areas to only 0.6 in Core Urban settings. Findings on differences among the four settlement types, which go beyond simply rural to urban contexts, suggest an important need to explore how best to manage and anticipate very different types of services that may be supportive in achieving energy-efficient and affordable mobility systems statewide.

54 ENVIRONMENTAL SCIENCES↗

Quantifying Airport Employee Commuting and Related Energy Use: A Comparison of Six US Airports

There has been growing research interest in understanding the energy signatures of airport access and egress as air travel continues to grow. However, these findings generally focus on airport access from the perspective of air travelers rather than ground access modes by airport employees. Using a data set of employment records, this paper uses residential location data of airport employees to estimate the energy implications of employee commuting at six major US airports based on commuting mode choice information from the US Census. This analysis reveals a high degree of variance in commuting energy usage by employees between different airports.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

SMART Mobility. Urban Science Capstone Report

The U.S. Department of Energy’s Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium is a multiyear, multi-laboratory collaborative, managed by the Energy Efficient Mobility Systems Program of the Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office, dedicated to further understanding the energy implications and opportunities of advanced mobility technologies and services. The Urban Science (US) Pillar focuses on maximum-mobility and minimum-energy opportunities associated with emerging transportation and transportation-related technologies specifically within the urban context. Such technologies, often referred to as automated, connected, efficient (or electrified), and shared (ACES), have the potential to greatly improve mobility and related quality of life in urban areas. Although all the SMART Mobility research pillars share some commonalities, Urban Science strives to model, analyze, and gain insights from the perspective of human settlements (the “city”) as a living organism. This is especially critical as the United States is one of the most urbanized countries, and as more and more of the global population migrates to urban areas.1 The urban mobility system consists of a complex network that reaches well beyond roads and vehicles and includes significant investments in public transit, private mobility services (such as taxis and transportation network companies, or TNCs), significant parking reserves, and curb management practices, not to mention the abundance of emerging on-demand micromobility services for the movement of people and goods such as e-bikes and scooters, which make the urban space a dynamic laboratory for mobility. Urban spaces also concentrate employment, markets, services, and attractions, which are the destinations for most trips. The concentration of human activities and ensuing density also creates the need and emphasis for space efficiency in urban environments, which is often less of a constraint in suburban or rural contexts. This mixture of transportation and mobility infrastructure and practice, combined with global urbanization trends, make urban spaces a critical focus of research for developing energy-efficient mobility systems (EEMS).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Factors Influencing Willingness to Pool in Ride-Hailing Trips

In the past decade, transportation network companies (TNCs) such as Uber, Lyft, and Via have established themselves as a viable transportation alternative to other modes. However, the popularity of these services has come with a fair share of criticism for their negative externalities such as increasing vehicle miles traveled and congestion in cities. Pooled ride-hailing trips, in which all or a part of two individual (or group) trips are combined in and served by a single vehicle, have the potential to reduce these externalities. Pooling of rides is an effective solution to reduce congestion and travel cost, but pooled rides still represent a small percentage of the total trips served (and miles driven) by TNCs relative to single-occupancy (and without customer) vehicle miles. Both TNCs and cities alike will benefit from understanding what factors encourage or deter pooling a ride-hailing trip. In this study, newly available Chicago transportation network provider data were explored to identify the extent to which different socioeconomic, spatiotemporal, and trip characteristics affect willingness to pool (WTP) in ride-hailing trips. Furthermore, multivariate linear regression and machine-learning models were employed to understand and predict WTP based on location, time, and trip factors. The results show intuitive trends, with income level at drop-off and pickup locations and airport trips as the most important predictors of WTP. Results from this study can help TNCs and cities devise strategies that increase pooled ride-hailing, thereby reducing adverse transportation and energy impacts from ride-hailing modes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Convergence of Public-Private Benefits in Denver: Surveys and Analyses to Inform Urban Mobility-, Energy-, Infrastructure- and Behavior-Related Innovation: Preprint

Cities, public transit agencies, and new private ride hailing services seek to understand emerging traveler dynamics, the shifting demographics of urban travelers,and new energy-efficient mobility opportunities. This includes exploring how new infrastructure investments, public and private mobility services, and smart-phone mobility apps are reshaping behaviors, demands (e.g. mobility-on-demand services), travel experiences and energy-efficient urban travel preferences. Currently, cities and metropolitan regions are providing and experimenting with many new mobility options, technologies, and personalized information services at the intersection of urban mobility, energy, and infrastructure systems (e.g., new commuter rail). To date, technology alone has not been able to crack the nut of 'creating faster trip times, less congestion, safer streets, and cleaner air for its citizens through fewer cars on the road'. This paper focuses on this gap by offering new concepts and potential for integrated approaches. Accommodating more vehicles miles traveled in cities, without increases in person miles traveled (PMT), could be costly, generating: 1) tremendous demands for new infrastructure, land, road space, materials, and energy; 2) higher traffic fatality risks; and 3) worsening air quality. Therefore, this study focuses on reducing single occupancy vehicle use by enhancing integrated mobility, helping transit and ridehailing increase occupancy in ways that also reduce energy use, and improve quality of life for urban travelers and communities. This study focuses on a survey of urban travelers in Denver, as a representative case study for metropolitan regions experiencing rapid growth, ageing populations, increased urban sprawl, traffic-related delays, and inefficient energy use per PMT.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mobility, Energy, and Electric Vehicle Typology for New York State

Mobility patterns, technology adoption and associated energy outcomes vary tremendously across settlement types. This paper explores how a highly geographically resolved exploration of the social, economic, techno-infrastructural and environmental domains of New York State is key to understanding observed variations in transportation technology adoption and associated mobility and energy outcomes. Current socioeconomic and mobility data sets at the census block group level are integrated in a hierarchical clustering approach to show how variations in mobility and energy outcomes are shaped by these domains - which may enhance progress on investments, or effectively inform planning and other decisions for state-wide goals. The clustering produces four settlement types to predict dependent variables of electric vehicle (EV) adoption rates, commute mode, vehicle fuel economy, and vehicles per household. This typology shows EV adoption rates among the core urban population, which is wealthy and highly-educated, are high - 3 EVs/1000 vehicles versus 1 EV/1000 vehicles among the urban working class. Commuting mode is closely linked with population and employment density - more than 90% of core urbanites use transit or active modes, compared with only 22% of suburbanites and 17% of rural residents. Household vehicle ownership also varies, with 2 vehicles per household in rural areas and only 0.5 in core urban settings. Important findings on differences among the rural, suburban, urban, and urban core settlement types suggest a need to explore how best to manage and anticipate very different types of services that may be supportive in achieving energy-efficient and affordable mobility systems state-wide.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ground Transportation at Airports: Ridehailing Uptake and Travel Shifts to Test Mode Choice Modeling Assumption

Ground transportation at airports poses a unique opportunity to understand mode shifts after introduction of ride-hailing services. Using five years of monthly transaction data for five modes (transit, parking, car rental, taxis, and ride-hailing) at the Seattle-Tacoma and Denver airports, this paper presents findings on how ride-hailing uptake impacts mode share for ground transportation trips to and from the airport. More specifically, the results explore how well the Independence of Irrelevant Alternatives facilitates estimation and forecasts prediction used in travel demand modeling for the uptake of new modes, as simply drawing from present modes in proportion to their existing shares.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Municipal Adaptation to Changing Curbside Demands: Findings from Semi-Structured Interviews with Ten U.S. Cities

Emerging mobility services (e.g. ride-hailing, e-commerce, micro-mobility, etc.), are generating novel and rapidly growing demands to use curbside space, with potentially large impacts on mobility, energy consumption, and related outcomes. This presents both opportunities and challenges to municipal agencies responsible for managing this interface between the road network and adjacent land uses, as legacy practices require updating. In this study, we employ a semi-structured interviewing approach to establish how municipalities are adapting to these new pressures on their curbside. We interviewed senior staff responsible for curbside policy of ten large U.S. municipalities, with populations ranging from ~250,000 to ~5,000,000 (and the majority of which are the central city of their metropolitan region). We document a trend of organizational restructuring to more formally include curbside management teams, with the majority of interviewees also reporting increased staffing. Respondents reported that operational failures at their curbside (e.g. demand in excess of capacity) have impacts on safety, capacity, and emergency vehicle mobility, with impacts highly concentrated spatially and temporally (e.g. late evenings in nightlife districts). We document a diversity of data flows between ride-hailing operators (e.g. Uber, Lyft) and municipalities, with some cities reporting obtaining types of data that other cities report not receiving, despite requesting such data. Finally, respondents consistently expressed a desire for new data streams and methodologies to help manage the curbside of the future. It is hoped that establishing the state of practice in this rapidly changing context will be of use to practitioners facing similar pressures as those of our interviewees.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Mobility Data and Models Informing Smart Cities

Using emerging data platforms, new mobility technologies, and travel demand models (TDMs), researchers, industry, and communities seek to improve the quality of transportation while maximizing the energy efficiency, equity, and safety of transportation services. As transportation may soon reach over 30% of U.S. energy consumption and with urban areas representing an increasing proportion of the U.S. population (>80% since 2010), a critical need exists to engage in urban data science-informed approaches to enhancing mobility. The objective of this study is to explore and document how aspiring Smart Cities are using data and models to inform mobility and energy initiatives within Smart City programs and in so doing identify gaps in knowledge and processes guiding Smart City mobility investment strategies, programs, projects, and pilots. A primary focus of the Smart Cities studied was the creation of an integrated data sharing environment approach. Most of these systems are being developed in parallel with multiple new data analysis tools, while regional metropolitan planning organizations continue to slowly evolve TDMs to take into account impacts of long-term strategies for emerging mobility technologies and services. Smart City initiatives in the United States have keen interests in leveraging knowledge and research on the mobility benefits and risks of automated, connected, efficient/electric, and shared on-demand mobility services; and understanding the related energy, environmental, economic, and societal impacts of these shifts. The results serve to identify key gaps in data, knowledge, and methods required to advance energy efficient urban mobility innovation, and to enable research and analysis collaboration between Smart Cities and the U.S. Department of Energy's efforts enabling new Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility.

33 ADVANCED PROPULSION SYSTEMS↗

Mobility Data and Models Informing Smart Cities

This presentation explores the interactions of Emerging Technology, Changing Urban Environments, and Travel Behavior on Mobility and Energy Impacts. Key findings include: Identifying and quantifying impacts of emerging mobility behaviors associated with Mobility as a Service (MaaS) and other new mobility choices in urban areas; The results demonstrate new methods to acquire data on quickly evolving MaaS in order to monitor rapidly shifting urban mobility patterns; Under development is a first airport mode choice model for access/egress, curbs, and vehicles related to transportation network company (TNC) use versus traditional modes; Initial estimates on the potential of employer-provided mobility on energy impacts. Key findings: for mode replacement, this presentation offers first observability into the changes in number of transactions per mode, after ride-hailing/TNC/MaaS introduction at airports: Seattle (SEA-TAC) airport: for every 100 new TNC transactions for ground transportation, ~ 27% replaced transit, 35% replaced parking, 17% replaced car rentals, and 21% replaced taxis; Similarly, at Denver International (DEN), ride-hailing transactions replaced transit, parking, car rental and taxis at a rate of 34.7%, 39.0%, 16.6%, and 9.7%, respectively.

30 DIRECT ENERGY CONVERSION↗

Exploring Energy-Efficient and Sustainable Urban Mobility Strategies: An Initial Framework to Curate Data/Models, Measure Performance, and Diffuse Innovation: Preprint

Many cities across the United States seek to understand the maturity of data and models that are available to help manage challenges, opportunities, and uncertainties associated with the shifts in technologies, human behaviors and sustainable urban mobility strategies. One key question identified for smart city action planning includes how to best shape continuous improvements for urban populations at the intersection of mobility, energy, and quality of life? With the emerging megatrends of urbanization (more than 70% of world population in cities by 2050), on-demand shared mobility, vehicle electrification, and automated vehicles, initial 'urban science' studies to date have demonstrated the potential and need for maturing the related data and model ecosystems and on-going performance measurement across multiple urban system goals: e.g., from more mobility, clean and efficient energy use, accessibility and safety to less air pollution, traffic, and resource-intensive urban sprawl. To build on emerging literature and understand city responses to disruptive change, this initial study engages researchers and practitioners across four smart city finalists (Columbus, Denver, Austin and Portland) that competed in the U.S. Department of Transportation (DOT) Smart City Challenge. The initial results emphasize the need for a suite of datasets and diverse analytical approaches that support U.S. Department of Energy (DOE) relevant research with cities. Considering desirable energy and mobility outcomes as a first step to advancing smart city solutions strategies, we systematically review approaches of and shortcomings in four U.S. cities, and suggest improvements in three areas: measurement, modeling effectiveness of new mobility technologies, and data-driven governance.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗