Engineering topics

Springer, A. M.

Publications and source records attributed to Springer, A. M..

6 records

NASA NTRS1999

X-34 Program

The X-34 is an Reusable Launch Vehicle (RLV) Operations testbed. The goal of the program is to examine some critical issues in the area of RLV's: (1) Operations cost (i.e., Can the time and manpower needed to process an RLV be reduced); (2) Advanced technologies (i.e., How will new technologies perform in an operational environment); (3) RLV range support (i.e., Can we tailor range support to reduce cost?); (4) Integrated Vehicle Health Monitoring (IVHM) (i.e., Can the use of a IVHM reduce cycle time and therefore time?). This presentation reviews these issues, and presents diagrams and pictures of the X-34.

Springer, A. M.↗

NASA NTRS1998

Application of Rapid Prototyping Methods to High-Speed Wind Tunnel Testing

This study was undertaken in MSFC's 14-Inch Trisonic Wind Tunnel to determine if rapid prototyping methods could be used in the design and manufacturing of high speed wind tunnel models in direct testing applications, and if these methods would reduce model design/fabrication time and cost while providing models of high enough fidelity to provide adequate aerodynamic data, and of sufficient strength to survive the test environment. Rapid prototyping methods utilized to construct wind tunnel models in a wing-body-tail configuration were: fused deposition method using both ABS plastic and PEEK as building materials, stereolithography using the photopolymer SL-5170, selective laser sintering using glass reinforced nylon, and laminated object manufacturing using plastic reinforced with glass and 'paper'. This study revealed good agreement between the SLA model, the metal model with an FDM-ABS nose, an SLA nose, and the metal model for most operating conditions, while the FDM-ABS data diverged at higher loading conditions. Data from the initial SLS model showed poor agreement due to problems in post-processing, resulting in a different configuration. A second SLS model was tested and showed relatively good agreement. It can be concluded that rapid prototyping models show promise in preliminary aerodynamic development studies at subsonic, transonic, and supersonic speeds.

Springer, A. M.↗

NASA NTRS1995

Transonic aerodynamic characteristics of a proposed wing-body reusable launch vehicle concept

A proposed wing-body reusable launch vehicle was tested in the NASA Marshall Space Flight Center's 14 x 14-inch trisonic wind tunnel during the winter of 1994. This test resulted in the vehicle's subsonic and transonic, Mach 0.3 to 1.96, longitudinal and lateral aerodynamic characteristics. The effects of control surface deflections on the basic vehicle's aerodynamics, including a body flap, elevons, ailerons, and tip fins, are presented.

Springer, A. M.↗

NASA NTRS1994

A shadowgraph study of Space Transportation System (STS): The Space Shuttle Launch Vehicle (SSLV)

A shadowgraph study of the space transportation system (STS), the space shuttle launch vehicle, is presented. The shadowgraphs presented in this study were obtained over the past 10 years from wind tunnel tests performed in the NASA Marshall Space Flight Center's 14-Inch Trisonic Wind Tunnel during the space shuttle development program. Shadowgraphs of the STS at various angles-of-attack and roll angles are shown for the Mach range of 0.6 to 4.96. The major flow field phenomena over the mated vehicle configuration are shown in these shadowgraphs. Shadowgraphs are also presented for the orbiter without the lower stack (reentry configuration) and the lower stack without the orbiter. A short study of external tank nose geometry effects on the mated vehicles flow field is presented. These shadowgraphs are used in the aerothermodynamic analysis of the external flow conditions the launch vehicle encounters during the ascent stage of flight.

Springer, A. M.↗

NASA NTRS1994

Aerodynamic characteristics of the National Launch System (NLS) 1 1/2 stage launch vehicle

The National Aeronautics and Space Administration (NASA) is studying ways of assuring more reliable and cost effective means to space. One launch system studied was the NLS which included the l l/2 stage vehicle. This document encompasses the aerodynamic characteristics of the 1 l/2 stage vehicle. To support the detailed configuration definition two wind tunnel tests were conducted in the NASA Marshall Space Flight Center's 14x14-Inch Trisonic Wind Tunnel during 1992. The tests were a static stability and a pressure test, each utilizing 0.004 scale models. The static stability test resulted in the forces and moments acting on the vehicle. The aerodynamics for the reference configuration with and without feedlines and an evaluation of three proposed engine shroud configurations were also determined. The pressure test resulted in pressure distributions over the reference vehicle with and without feedlines including the reference engine shrouds. These pressure distributions were integrated and balanced to the static stability coefficients resulting in distributed aerodynamic loads on the vehicle. The wind tunnel tests covered a Mach range of 0.60 to 4.96. These ascent flight aerodynamic characteristics provide the basis for trajectory and performance analysis, loads determination, and guidance and control evaluation.

Springer, A. M.↗

NASA NTRS1993

A shadowgraph study of two proposed Shuttle-C launch vehicle configurations

A shadowgraph study concerning two of the proposed Shuttle-C launch vehicle configurations are presented. These shadowgraphs were obtained from a wind tunnel test performed in Marshall Space Flight Center's 14-in trisonic wind tunnel at various angles-of-attack and roll angles over the Mach range of 0.6 to 4.96. Variations in payload bay length were also evaluated. Major flow field phenomena can easily be seen in the shadowgraphs. Shadowgraphs are a valuable resource. They are used in the analysis of the external flow conditions the launch vehicle encounters through the ascent stage of flight. Subsequent reports will contain shadowgraph studies for other launch vehicle configurations also tested in the Marshall Space Flight Center's 14-in trisonic wind tunnel.

Springer, A. M.↗