Engineering topics

Srinivasan, Gowri

Publications and source records attributed to Srinivasan, Gowri.

14 records

DOE OSTI2024

Carbon Mineralization in Fractured Mafic and Ultramafic Rocks: A Review

Mineral carbon storage in mafic and ultramafic rock masses has the potential to be an effective and permanent mechanism to reduce anthropogenic CO 2 . Several successful pilot-scale projects have been carried out in basaltic rock (e.g., CarbFix, Wallula), demonstrating the potential for rapid CO 2 sequestration. However, these tests have been limited to the injection of small quantities of CO 2 . Thus, the longevity and feasibility of long-term, large-scale mineralization operations to store the levels of CO 2 needed to address the present climate crisis is unknown. Moreover, CO 2 mineralization in ultramafic rocks, which tend to be more reactive but less permeable, has not yet been quantified. In these systems, fractures are expected to play a crucial role in the flow and reaction of CO 2 within the rock mass and will influence the CO 2 storage potential of the system. Therefore, consideration of fractures is imperative to the prediction of CO 2 mineralization at a specific storage site. In this review, we highlight key takeaways, successes, and shortcomings of CO 2 mineralization pilot tests that have been completed and are currently underway. Laboratory experiments, directed toward understanding the complex geochemical and geomechanical reactions that occur during CO 2 mineralization in fractures, are also discussed. Experimental studies and their applicability to field sites are limited in time and scale. Many modeling techniques can be applied to bridge these limitations. We highlight current modeling advances and their potential applications for predicting CO 2 mineralization in mafic and ultramafic rocks.

25 ENERGY STORAGE↗

DOE OSTI2024

Calculation of Velocities from Explosive Shot Test Fast-Frame Imagery

A cylinder of the experimental HE is detonated inside of an aquarium and sequential fast-frame images are taken of the resulting shock wave. We wish to use the sequence of images to extract quantitative data regarding the detonation velocity and velocity of the shock wave which can then be used to tune the parameters of the equation of state for the experimental HE material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Earth Sciences Applications for Energy and Global Security: A Few Vignettes [Slides]

Understanding the physics of flow and transport in the subsurface environment is crucial to several National Security applications. In the Energy Security realm, some examples include characterizing radioactive waste disposal, exploring natural gas extraction and sequestering CO2. An example in the Global Security arena is to be able to distinguish between anthropogenic and naturally occurring seismic disturbances, the former being of particular concern as underground nuclear testing activity has seen an increase in recent years. A common theme across these applications is the ability to accurately model fluid flow in porous and/or fractured subsurface media. For decades, researchers have grappled with how to include the effects of uncertainties in these models, including but not limited to heterogeneity, unknown initial and boundary conditions and issues with scalability. More recently advances in computing and machine learning methodologies have allowed a broader exploration of the uncertainty space as we strive for real time decision making. I will present an overview of the field and discuss a few examples of how my own research in these topics has evolved over nearly two decades.

58 GEOSCIENCES↗

DOE OSTI2022

Modeling Flow and Transport in Fractured Rock using Machine Learning [Slides]

Fractured systems in the subsurface play a role in many natural and engineered applications such as geologic carbon sequestration, hydraulic fracturing and underground nuclear test detection. Structural information (fracture size, orientation, etc.) plays a key role in governing the dominant physics for these systems but can only be known statistically. Traditional modeling approaches either ignore or idealize structural information at these larger scales because we lack a computational framework that utilizes it in its entirety. The work presented here integrates computational physics, machine learning and graph theory to make a paradigm shift from computationally intensive high-fidelity models to coarse-scale graphs without loss of critical structural information. We exploit the underlying discrete structure of fracture networks in systems considering flow through fractures and fracture propagation. We demonstrate that compact graph representations require significantly fewer degrees of freedom (dof) to capture micro-fracture information and further accelerate these models with Machine Learning.

58 GEOSCIENCES↗

DOE OSTI2021

Identifying Entangled Physics Relationships Through Sparse Matrix Decomposition to Inform Plasma Fusion Design

We report a sustainable burn platform through inertial confinement fusion (ICF) has been an ongoing challenge for over 50 years. Mitigating engineering limitations and improving the current design involves an understanding of the complex coupling of physical processes. While sophisticated simulation codes are used to model ICF implosions, these tools contain necessary numerical approximation but miss physical processes that limit predictive capability. Identification of relationships between controllable design inputs to ICF experiments and measurable outcomes (e.g., neutron yield, neutron velocity, areal density) from performed experiments can help guide the future design of experiments and development of simulation codes, to potentially improve the accuracy of the computational models used to simulate ICF experiments. We use sparse matrix decomposition methods to identify clusters of a few related design variables. Sparse principal component analysis (SPCA) identifies groupings that are related to the physical origin of the variables (laser, hohlraum, and capsule). A variable importance analysis finds that in addition to variables highly correlated with neutron yield, such as picket power and laser energy, variables that represent a dramatic change of the ICF design, such as number of pulse steps, are also very important. The obtained sparse components are then used to train a random forest (RF) regression surrogate for predicting total yield. The RF performance on the training and testing data compares with the performance of the RF trained using all the design variables considered. This work is intended to inform design changes in future ICF experiments by augmenting the expert intuition and simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Exploring Sensitivity of ICF Outputs to Design Parameters in Experiments Using Machine Learning

We report building a sustainable burn platform in inertial confinement fusion (ICF) requires an understanding of the complex coupling of physical processes and the effects that key experimental design changes have on implosion performance. While simulation codes are used to model ICF implosions, incomplete physics and the need for approximations deteriorate their predictive capability. Identification of relationships between controllable design inputs and measurable outcomes can help guide the future design of experiments and development of simulation codes, which can potentially improve the accuracy of the computational models used to simulate ICF implosions. In this article, we leverage developments in machine learning (ML) and methods for ML feature importance/sensitivity analysis to identify complex relationships in ways that are difficult to process using expert judgment alone. We present work using random forest (RF) regression for prediction of yield, velocity, and other experimental outcomes given a suite of design parameters, along with an assessment of important relationships and uncertainties in the prediction model. We show that RF models are capable of learning and predicting on ICF experimental data with high accuracy, and we extract feature importance metrics that provide insight into the physical significance of different controllable design inputs for various ICF design configurations. These results can be used to augment expert intuition and simulation results for optimal design of future ICF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Multilevel Graph Partitioning for Three-Dimensional Discrete Fracture Network Flow Simulations

We present a topology-based method for mesh-partitioning in three-dimensional discrete fracture network (DFN) simulations that takes advantage of the intrinsic multi-level nature of a DFN. DFN models are used to simulate flow and transport through low-permeability fractured media in the subsurface by explicitly representing fractures as discrete entities. The governing equations for flow and transport are numerically integrated on computational meshes generated on the interconnected fracture networks. Modern high-fidelity DFN simulations require high-performance computing on multiple processors where performance and scalability depends partially on obtaining a high-quality partition of the mesh to balance work-loads and minimize communication across all processors. The discrete structure of a DFN naturally lends itself to various graph representations, which can be thought of as coarse-scale representations of the computational mesh. Using this concept, we develop two applications of the multilevel graph partitioning algorithm to partition the mesh of a DFN. In the first, we project a partition of the graph based on the DFN topology onto the mesh of the DFN and in the second, this DFN-based projection is used as the initial condition for further partitioning refinement of the mesh. We compare the performance of these methods with standard multi-level graph partitioning using graph-based metrics (cut, imbalance, partitioning time), computational-based metrics (FLOPS, iterations, solver time), and total run time. The DFN-based and the mesh-based partitioning methods are comparable in terms of the graph-based metrics, but the time required to obtain the partition is several orders of magnitude faster using the DFN-based partitions. The computation-based metrics show comparable performance between both methods so, in combination, the DFN-based partitions are several orders of magnitude faster than the mesh-based partition. Furthermore, the method which uses the DFN-partition solution as the initial condition of the mesh partition provided cut and imbalance values that were close to the mesh-based partition but in a fraction of the time. In turn, this hybrid method outperformed both of the other methods in terms of the total run time.

58 GEOSCIENCES↗

DOE OSTI2021

StressNet - Deep learning to predict stress with fracture propagation in brittle materials

Abstract Catastrophic failure in brittle materials is often due to the rapid growth and coalescence of cracks aided by high internal stresses. Hence, accurate prediction of maximum internal stress is critical to predicting time to failure and improving the fracture resistance and reliability of materials. Existing high-fidelity methods, such as the Finite-Discrete Element Model (FDEM), are limited by their high computational cost. Therefore, to reduce computational cost while preserving accuracy, a deep learning model, StressNet, is proposed to predict the entire sequence of maximum internal stress based on fracture propagation and the initial stress data. More specifically, the Temporal Independent Convolutional Neural Network (TI-CNN) is designed to capture the spatial features of fractures like fracture path and spall regions, and the Bidirectional Long Short-term Memory (Bi-LSTM) Network is adapted to capture the temporal features. By fusing these features, the evolution in time of the maximum internal stress can be accurately predicted. Moreover, an adaptive loss function is designed by dynamically integrating the Mean Squared Error (MSE) and the Mean Absolute Percentage Error (MAPE), to reflect the fluctuations in maximum internal stress. After training, the proposed model is able to compute accurate multi-step predictions of maximum internal stress in approximately 20 seconds, as compared to the FDEM run time of 4 h, with an average MAPE of 2% relative to test data.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Transient flow modeling in fractured media using graphs

In this work, we describe a method to simulate transient fluid flows in fractured media using an approach based on graph theory. Our approach builds on past work where the graph-based approach was successfully used to simulate steady-state fluid flows in fractured media. We find a mean computational speedup of the order of 1400 from an ensemble of a 100 discrete fracture networks in contrast to the O(10 4 ) speedup that was obtained for steady-state flows earlier. However, the transient flows considered here involve an additional degree of complexity that was not present in the steady-state flows considered previously with a graph-based approach, that of time marching and solution of the flow equations within a time-stepping scheme. We verify our method with an analytical test case and demonstrate its use on a practical problem related to fluid flows in hydraulically fractured reservoirs. By enabling the study of transient flows, we create an opportunity for a wide set of possibilities where a steady-state approximation is not sufficient, such as the example motivated by hydraulic fracturing that we present here. This work validates the concept that graphs are able to reliably capture the topological properties of the fracture network and serve as effective surrogates in an uncertainty-quantification framework.

58 GEOSCIENCES↗

DOE OSTI2020

Verification and Validation of High Explosive Reactive Burn Models Implemented in LANL's EAP and LAP Code Base

Reactive burn models represent a significant leap in high explosive (HE) modeling capability. The first generation of engineering models of HE detonation are called programmed burn models and they are largely based on the distance between a prescribed detonation point and each zone in a simulation. There have been many advancements to programmed burn models over the years and when the assumptions upon which they are based are met, a properly tuned programmed burn model can be highly accurate but if any of their assumptions is not met, as is the case for corner turning or weakly initiated HE burn, they will give the wrong answer. Reactive burn models represent an entirely new way of modeling HE burn. They use the local conditions of a zone – e.g. temperature, pressure or density – as calculated by a hydrocode to determine if and when the zone is going to detonate and if so, how rapidly. This difference opens up an entirely new set of capabilities for HE modeling. It makes it possible to accurately and predictively model phenomena like the effect of confinement and the formation of dead zones. Reactive burn models have seen sustained development effort at LANL for at least the last decade but several recent developments make it timely to transition reactive burn models from a research topic to a production tool. The main goal of this milestone is to facilitate and accelerate the adoption of reactive burn as a commonly available modeling option, with recommendations on the resolution that will be required and uncertainties associated with their modeling choices. To achieve this, we have performed verification, validation, and uncertainty quantification (UQ) assessments of AWSD and SURF/SURFplus in xRage and FLAG on a variety of different problems.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2020

Verification and Validation of High Explosive Reactive Burn Models Implemented in LANL's EAP and LAP Code Base (FY2020 L2 Milestone MRT 7129) [Slides]

Advanced reactive burn models enable phenomena to be modeled that aren’t possible with programmed burn. Programmed burn propagates a burn front at a prescribed speed from a prescribed initiation point. Reactive burn uses the hydro variables (pressure, temperature, etc.) to determine when, how rapidly, and to what extent a zone detonates. This enables a completely new set of problems to be simulated. Our goal in this milestone has been to improve the usability of reactive burn modes. Thus, the closure criteria are: 1. Perform code and solution verification of the reactive burn models using appropriate solutions and simplified HE setups. 2. Perform validation assessments using small-scale experiments. 3. Evaluate sensitivities and quantify uncertainties due to model form variations and mesh dependencies.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2020

Accelerating high-strain continuum-scale brittle fracture simulations with machine learning

Failure in brittle materials under dynamic loading conditions is a result of the propagation and coalescence of microcracks. Simulating this discrete crack evolution at the continuum level is computationally expensive or, in some cases, intractable, resulting in the need to make broad assumptions or neglect key physics. In this work, we have developed an approach using machine learning that overcomes the current inability to represent meso-scale physics at the macro-scale. Our approach leverages damage and stress data from a computationally expensive high-fidelity model that explicitly resolves microcrack behavior to build an inexpensive machine learning emulator. Once trained, the machine learning emulator is used to predict the evolution of crack length statistics, which then informs a continuum-scale constitutive model. This results in a significant speed-up of the workflow by four orders of magnitude. Both the machine learning emulator and the continuum-scale model are validated against the high-fidelity model and experimental data, respectively, showing excellent agreement. There are two key findings. The first is that we can reduce the dimensionality of the problem, establishing that the machine learning emulator only needs the length of the longest crack and one of the maximum stress components to capture the necessary physics. Another compelling finding is that the emulator can be trained in one experimental setting and transferred successfully to predict behavior in a different setting.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Identifying Entangled Physics Relationships through Sparse Matrix Decomposition to Inform Plasma Fusion Design [Slides]

The National Ignition Facility (NIF), is a large laser-based inertial confinement fusion (ICF) research device and various input variables in the experimental data are described. The overview included sections on: high-dimensional experimental dataset; surrogate model selection; ML to interpret complex coupling between inputs; importance of variables; Surrogate performance; and, future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Towards real-time forecasting of natural gas production by harnessing graph theory for stochastic discrete fracture networks

In this work, we compare hydrocarbon production curves obtained from a graph-based reduced-order model with the high-fidelity Discrete Fracture Network (DFN) predictions for a fracture network created using data from a real shale site. We observe that the bounds for the high fidelity DFN model lie within the bounds for the reduced order model, implying that the reduced-order model provides a conservative estimate. Moreover, we found that except for first-passage times and late arriving mass, the production curves from the reduced-order model predict transport accurately. However, it is to be noted that the results are inspite of trading a three-dimensional geometry for a reduced system in the form of a graph, one that is 500–1000 times faster in terms of computational efficiency (for this particular application). In addition, we also compare the production curves for large drawdown and small drawdown using our graph approach. The reduced-order model is successful in showing that the long term productivity is higher in case of small drawdown although the initial productivity is higher for large drawdown. Thus, this reduced-order model offers great potential in uncertainty quantification for production, as well as in providing operators with information to make real-time decisions for optimal production.

03 NATURAL GAS↗