Engineering topics

Stachnik, R. V.

Publications and source records attributed to Stachnik, R. V..

5 records

NASA NTRS1987

A test-bed for space interferometry: Space Platform Interferometer (SPI)

The Space Platform Interferometer (SPI), a 20-m two-mirror Michelson interferometer, which can reach magnitude 14 at UV and visible wavelengths, is described. The SPI is attached to a platform serviced from the space station. In addition to its ability to produce unique science in the UV, SPI is intended to demonstrate the feasibility of larger projects in the field. Dynamical behavior of the structure in the gravity gradient environment and fringe stabilization at low photon rate are studied by picking up an adjacent bin (in the near IR) on the same object and using it to track the white light fringe in a separate differential interferometer. The same subsystem also corrects for tilt. Active control of critical parameters ensures optical rigidity. Performances are evaluated in low orbit.

Faucherre, M.↗

NASA NTRS1985

SAMSI: An orbiting spatial interferometer for micro-arc second astronomical observations

The concept and performance of (SAMSI) Spacecraft Array for Michelson Spatial Interferometry, an orbiting spatial interferometer comprised of three free-flying spacecraft, two collector telescopes and a central mixing station are described. In the one-dimensional interferometry mode orbits exist which provide natural scanning of the baseline. These orbits place extremely small demands on thrusters and fuel consumption. Resolution of 0.00001 arcsecond and magnitude limits of mv = 15 to 20 are achievable in a single orbit. In the imaging mode, SAMSI could synthesize images equivalent to those produced by equal diameter filled apertures in space, making use of the fuel resupply capability of a space station. Simulations indicate that image reconstruction can be performed with milliarcsecond resolution to a visual magnitude 12 in 12 hr of spiral scanning integration time.

Stachnik, R. V.↗

NASA NTRS1984

Multiple spacecraft Michelson stellar interferometer

Results of an orbital analysis and performance assessment of SAMSI (Spacecraft Array for Michelson Spatial Interferometry) are presented. The device considered includes two one-meter telescopes in orbits which are identical except for slightly different inclinations; the telescopes achieve separations as large as 10 km and relay starlight to a central station which has a one-meter optical delay line in one interferometer arm. It is shown that a 1000-km altitude, zero mean inclination orbit affords natural scanning of the 10-km baseline with departures from optical pathlength equality which are well within the corrective capacity of the optical delay line. Electric propulsion is completely adequate to provide the required spacecraft motions, principally those needed for repointing. Resolution of 0.00001 arcsec and magnitude limits of 15 to 20 are achievable.

Stachnik, R. V.↗

NASA NTRS1983

A study of a space-station-associated multiple spacecraft Michelson spatial interferometer

One approach to Michelson spatial interferometry at optical wavelengths involves use of an array of spacecraft in which two widely-separated telescopes collect light from a star and direct it to a third, centrally-located, device which combines the beams in order to detect and measure interference fringes. The original version of a spacecraft array for Michelson spatial interferometry (SAMSI) was modified so that the system uses the fuel resupply capability of a space station. The combination of this fuel resupply capability with a method of obtaining image Fourier transform phase information, necessary for full image reconstruction, permits SAMSI to be used to synthesize images equivalent to those produced by huge apertures in space. Synthesis of apertures in the 100 to 500 meter range is discussed. Reconstruction can be performed to a visual magnitude of at least 8 for a 100 A passband in 9 hours. Data are simultaneously collected for image generation from 0.1 micron to 18 microns. In the one-dimensional mode, measurements can be made every 90 minutes (including acquisition and repointing time) for objects as faint as 19th magnitude in the visible.

Stachnik, R. V.↗

NASA NTRS1979

Restoration of turbulence degraded images - A review

The paper surveys techniques for recovering high resolution information from atmospheric turbulence degraded images. Several approaches to image restoration are covered, noting that the effectiveness of each technique is strongly dependent on the brightness and the angular extent of the object being observed. These approaches include: speckle holography and betelgence imaging, nonredundant aperture imaging, phase retrieval, and speckle imaging. In addition, the applications and the expected performance range of the various techniques are discussed.

Nisenson, P.↗