Engineering topics

Stack, John P.

Publications and source records attributed to Stack, John P..

12 records

NASA NTRS1993

Surface hot-film method for the measurement of transition, separation and reattachment points

A real-time method of determining positions of laminar-to-turbulent transition region, separation and reattachment points and stagnation points using an array of simultaneously operated surface-mounted hot-film sensors has been developed and applied to a wind-tunnel test of a multielement airfoil model. Determination of various types of transitions and flow directions in various regimes of flows seen on multielement airfoils are possible without precise sensor calibration or laborious post-test data analysis. The results agree with established method and theoretical methods, but determination of turbulent reattachment points are not yet satisfactory.

Nakayama, Akihiko↗

NASA NTRS1993

Measuring Tollmien-Schlichting Instabilities In Laminar Flow

NASA flight experiment conducted to evaluate surface-mounted hot-film sensors designed to detect Tollmien-Schlichting (T-S) instability in boundary layer in flight. New technique has considerable value in applied research aimed at extending regions of natural laminar flow on aircraft. Aids research into mechanisms leading to transition from laminar to turbulent boundary layers. Makes it practical to take measurements in many locations on wing surface for tests in flight. Useful in studying transitions in such flow as those in pipes, ducts, channels, compressors, and diffusers.

Lee, Cynthia C.↗

NASA NTRS1992

The NASA Langley laminar-flow-control experiment on a swept, supercritical airfoil: Evaluation of initial perforated configuration

The initial evaluation of a large-chord, swept, supercritical airfoil incorporating an active laminar-flow-control (LFC) suction system with a perforated upper surface is documented in a chronological manner, and the deficiencies in the suction capability of the perforated panels as designed are described. The experiment was conducted in the Langley 8-Foot Transonic Pressure Tunnel. Also included is an evaluation of the influence of the proximity of the tunnel liner to the upper surface of the airfoil pressure distribution.

Harris, Charles D.↗

NASA NTRS1990

Method and apparatus for detecting laminar flow separation and reattachment

The invention is a method and apparatus for simultaneously detecting laminar separation and reattachment of a fluid stream such as an airstream from and to the upper surface of an airfoil by simultaneously sensing and comparing a plurality of output signals. Each signal represents the dynamic shear stress at one of an equal number of sensors spaced along a straight line on the surface of the airfoil that extends parallel to the airstream. The output signals are simultaneously compared to detect the sensors across which a reversal in phase of said output signal occurs, said detected sensors being in the region of laminar separation or reattachment.

Stack, John P.↗

NASA NTRS1990

Experiments on a separation bubble over an Eppler 387 airfoil at low Reynolds numbers using thin-film arrays

Experiments carried out at the NASA Langley Low-Turbulence Pressure Tunnel on an Eppler 387 airfoil at several angles of attack for Reynolds numbers of 100,000 to 300,000 are discussed. Cross-correlations and phase diagrams are used in calculating velocities, while spectra are used in checking for amplified frequencies, and coherence plots for causality. Hot-film measurements, oil-flow visualization, pressure measurements, and Drela code are compared for finding the leading and trailing edges of the bubble. It is observed that all methods agree in showing the beginning and end of the separation bubble, the velocity measurements agree in magnitude for the lower velocities, and wave packets appear in the cross-correlation.

Mousseux, Marc C.↗

NASA NTRS1989

Method and apparatus for detecting laminar flow separation and reattachment

The invention is a method and apparatus for detecting laminar flow separation and flow reattachment of a fluid stream by simultaneously sensing and comparing a plurality of output signals, each representing the dynamic shear stress at one of an equal number of sensors spaced along a straight line on the surface of an airfoil or the like that extends parallel to the fluid stream. The output signals are concurrently compared to detect the sensors across which a reversal in phase of said output signal occurs, said detected sensors being in the region of laminar separation or reattachment. The novelty in this invention is the discovery and use of the phase reversal phenomena to detect laminar separation and attachment of a fluid stream from any surface such as an airfoil supported therein.

Stack, John P.↗

NASA NTRS1989

Measuring Laminar-Separation Bubbles On Airfoils

Nonintrusive multielement heat-transfer sensor overcomes limitations of previous methods. New technique determines simultaneously extent of laminar boundary layer and locations of laminar separation, transition in separated layer, and turbulent reattachment. In tests, only small amounts of heat introduced, and heated thin films caused little disturbance to shear layer or to each other. Promising tool for measurements of stability of laminar boundary layers, separated shear layers, and transitional separation bubbles. Simple and capable of providing comprehensive picture of state of shear flow along entire surface. Significant savings in tunnel (or flight) test time with corresponding savings in cost.

Stack, John P.↗

NASA NTRS1989

The NASA Langley Laminar-Flow-Control Experiment on a Swept Supercritical Airfoil: Basic Results for Slotted Configuration

The effects of Mach number and Reynolds number on the experimental surface pressure distributions and transition patterns for a large chord, swept supercritical airfoil incorporating an active Laminar Flow Control suction system with spanwise slots are presented. The experiment was conducted in the Langley 8 foot Transonic Pressure Tunnel. Also included is a discussion of the influence of model/tunnel liner interactions on the airfoil pressure distribution. Mach number was varied from 0.40 to 0.82 at two chord Reynolds numbers, 10 and 20 x 1,000,000, and Reynolds number was varied from 10 to 20 x 1,000,000 at the design Mach number.

Harris, Charles D.↗

NASA NTRS1989

Laminar-flow wind tunnel experiments

Although most of the laminar flow airfoils recently developed at the NASA Langley Research Center were intended for general aviation applications, low-drag airfoils were designed for transonic speeds and wind tunnel performance tested. The objective was to extend the technology of laminar flow to higher Mach and Reynolds numbers and to swept leading edge wings representative of transport aircraft to achieve lower drag and significantly improved operation costs. This research involves stabilizing the laminar boundary layer through geometric shaping (Natural Laminar Flow, NLF) and active control involving the removal of a portion of the laminar boundary layer (Laminar-Flow Control, LFC), either through discrete slots or perforated surface. Results show that extensive regions of laminar flow with large reductions in skin friction drag can be maintained through the application of passive NLF boundary-layer control technologies to unswept transonic wings. At even greater extent of laminar flow and reduction in the total drag level can be obtained on a swept supercritical airfoil with active boundary layer-control.

Harvey, William D.↗

NASA NTRS1987

Predicted and hot-film measured Tollmien-Schlichting wave characteristics

The Tollmien-Schlichting (TS) instability is a time-dependence instability which can lead to transition of laminar boundary layers on airfoils. A comparison of theoretical predictions and experimental observations of the TS instability on the NLF(1)-0414F airfoil designed by Viken and Pfenninger. The theoretical predictions were obtained using the SALLY stability code. Test results, from the same hot films that were used to detect transition, revealed that TS waves could be detected by the hot films if the hot-film signal was adequately modified.

Stack, John P.↗

NASA NTRS1987

Reduction of Orifice-Induced Pressure Errors

Use of porous-plug orifice reduces or eliminates errors, induced by orifice itself, in measuring static pressure on airfoil surface in wind-tunnel experiments. Piece of sintered metal press-fitted into static-pressure orifice so it matches surface contour of model. Porous material reduces orifice-induced pressure error associated with conventional orifice of same or smaller diameter. Also reduces or eliminates additional errors in pressure measurement caused by orifice imperfections. Provides more accurate measurements in regions with very thin boundary layers.

Plentovich, Elizabeth B.↗

NASA NTRS1987

In-flight detection of Tollmien-Schlichting instabilities in laminar flow

This paper presents the results of a recent flight experiment conducted to evaluate surface-mounted hot-film sensors designed to detect Tollmien-Schlichting instability in the boundary layer in flight. Flight data are presented to illustrate the design and operation of the sensors and to provide information on disturbance growth and transition mode. The results of calculations using a boundary-layer analysis code and boundary-layer linear stability analysis methods are included.

Croom, Cynthia C.↗