Search NASASearch

Engineering topics

Stacy, John E.

Publications and source records attributed to Stacy, John E..

Compensation for primary reflector wavefront error

In a telescope having primary and secondary reflectors, wherein the actual primary reflector surface deviates from an ideal primary reflector surface, such deviation is compensated for. At least one intermediate element forms an image of the primary surface onto the secondary surface, so each point on the secondary surface corresponds to a point on the primary surface. The secondary surface is formed with a deviation from an ideal secondary surface, with the piston distance of each point on the actual secondary surface equal to the piston distance of a corresponding point on the actual primary surface from the ideal primary surface. It is found that this results in electromagnetic (e.g., light) rays which strike a deviating area of the actual primary surface being brought to the same focus as if the actual primary surface did not have a deviation from an ideal primary surface.

Meinel, Aden B.

Error-Compensated Telescope

Proposed reflecting telescope includes large, low-precision primary mirror stage and small, precise correcting mirror. Correcting mirror machined under computer control to compensate for error in primary mirror. Correcting mirror machined by diamond cutting tool. Computer analyzes interferometric measurements of primary mirror to determine shape of surface of correcting mirror needed to compensate for errors in wave front reflected from primary mirror and commands position and movement of cutting tool accordingly.

Meinel, Aden B.

Transferring Lens Prescriptions Between Lens-Design Programs

Optical Lens Prescription Data Formatter computer program enables user to transfer complicated lens prescriptions quickly and easily from one major optical-design program to another and back again. One can take advantage of inherent strength of either program. Programs are ACCOS V from Scientific Calculations, Inc., of Fishers, NY, and CODE V from Optical Research Associates of Pasadena, CA. VAX version written in FORTRAN.

Stacy, John E.

Making Optical Correctors by Diamond Turning

Large Optics Diamond Turning Machine (LODTM) at Lawrence Livermore National Laboratory used to make highly amorphic reflecting wavefront-corrector plates with rms difference between desired and measured reflector surfaces of only 0.075 wave. Measured errors correspond to one standard deviation of uncertainties in digitization and reduction of interferograms of surface. Appears accuracy of LODTM-generated surface exceeds current ability to measure it. Work demonstrates feasibility of single-point diamond turning for manufacture of generalized wavefront-control surfaces or other unusual surfaces desired by optical designers.

Meinel, Aden B.