Verification and validation of atmospheric transport models with the UF Training Reactor
The University of Florida Training Reactor (UFTR) is a 100-kW ARGONAUT type reactor with a unique design such that a large volume of air passes through the core, producing and releasing significant quantities of 41 Ar. Once released, the radioargon is dispersed throughout the atmosphere and decays by a 1294 keV gamma ray emission. This quantified, validated, and controlled 41 Ar plume can be utilized to verify and validate atmospheric transport models (ATMs). This is accomplished by coupling an ATM with MCNP and comparing the results to experimental measurements. For this study, an in-house developed Gaussian dispersion model and the EPA approved Gaussian model AERMOD were coupled with MCNP to simulate the results of a six hour measurement taken on May 8th, 2018. For the measurements and simulations, a grid of seven NaI detectors were placed in four different rooftop locations near the UFTR plume stack. With easterly winds dominating during the morning and early afternoon, both the measurement results and simulations displayed a higher 41 Ar photon count rate on the detectors west of the plume stack throughout the day. Overall, the AERMOD simulations produced better results when compared to the in-house model, particularly for the detectors placed east and west of the plume stack. While some of the AERMOD data showed a strong correlation with the measurements, the results remain inconsistent. Here, due to the varying accuracy of the simulation results, it is theorized that the relationship between measurement results and simulations will improve with the use of localized weather information or the utilization of non-Gaussian dispersion models.