Engineering topics
Stadtherr, Mark A.
Publications and source records attributed to Stadtherr, Mark A..
Network Modeling of the U.S. Petrochemical Industry under Raw Material and Hurricane Harvey Disruptions
A geographically resolved network model of the U.S. chemical industry in 2017 is designed, and optimal chemical flows between units are calculated using linear programming. A baseline solution and three disruption scenarios (primary raw material disruptions, reported Hurricane Harvey ethylene cracker disruptions, and assumed capacity disruptions based on the Hurricane Harvey geographic storm track) are reported on to determine how the structure of the industry is modified to adapt to widespread and geographically specific disruptions. The calculated impacts of the assumed Hurricane Harvey disruption include 170 chemical units in 26 states that change production level as a result of supply chain disruptions during the storm. The systemic impact for the assumed Hurricane Harvey disruption is 19.3 million tonnes of gross chemical production. The day with the largest impact on gross chemical production shows a reduction from baseline operations of 1.3 million tonnes (42% of baseline). This model can be utilized for analysis of future disruption scenarios and to test resilience strategies, including impacts of new manufacturing configurations or technologies.
Hybrid Encapsulated Ionic Liquids for Post-Combustion Carbon Dioxide (CO 2 ) Capture
Ionic liquids (ILs) and Phase Change Ionic Liquids (PCILs) are excellent materials for selective removal of carbon dioxide from dilute post-combustion streams. However, they are typically characterized as having high viscosities, which impairs their effectiveness due to mass transfer limitations, caused by the high viscosities. In this project, we are examining the benefits of encapsulating ILs and PCILs in thin polymeric shells to produce particles of approximately 100 to 600 µm in diameter that can be used in a fluidized bed absorber. The particles are produced by microencapsulation of the ILs and PCILs in CO 2 -permeable polymer shells. Here we report on the encapsulation of the IL and PCIL materials, thermodynamic testing of the encapsulated materials, mass transfer measurements in both a fluidized bed and a packed bed, determination of the effect of impurities (SO 2 , NO x and water) on the free and encapsulated IL and PCIL, recyclability of the CO 2 uptake, selection and synthesis of kg quantities of the IL and PCIL, identification of scale-up methods for encapsulation and production of a kg quantity of the PCIL, construction and shakedown of the laboratory scale unit to test the encapsulated particles for CO 2 capture ability and efficiency, use of our mass transfer model to predict mass transfer and identify optimal properties of the encapsulated particles, and initial testing of the encapsulated particles in the laboratory scale unit. We also show our attempts at developing shell materials that are resistant to water permeation. Overall, we have shown that the selected IL and PCIL can be successfully encapsulated in polymer shells and the methods scaled up to production levels. The IL/PCIL and encapsulated IL/PCIL react irreversibly with SO 2 and NO x so the CO 2 capture unit would need to be placed after the flue gas desulfurization and NO x reduction units. However, the reaction with CO 2 in the presence of water is completely reversible. Therefore, it is not necessary to exclude water from the capsules. Mass transfer in the fluidized and packed beds confirm that the fluidized bed arrangement is preferred and that the mass transfer can be predicted accurately by the rate based model that we have developed. Absorption and desorption experiments in the laboratory scale unit show good uptake and recyclability.