Engineering topics

Stallworth, Phillip

Publications and source records attributed to Stallworth, Phillip.

5 records

DOE OSTI2024

Probing the potential of type V Deep eutectic solvents as sustainable electrolytes

The increasing interest within the scientific community in environmentally friendly solvents has led to a focus on Deep Eutectic Solvents (DES), which have natural components. DES are viewed as alternatives to traditional organic solvents and have the potential to be used as electrolytes. For the first time, transport properties of four Type V Deep Eutectic Salt Solutions (DESS) were accessed to investigate the potential of this technology, selecting precursors ranked as excellent in Eco-Scale metrics. The DESS were composed of terpene and trioctylphosphine oxide (TOPO), and varying concentrations of lithium bis(trifluoromethane)sulfonimide (LiTFSI), and their properties were assessed through self-diffusion, viscosity, density, and conductivity measurements. While Type V DESS are capable of dissolving significant amounts of LiTFSI (up to 30 % molar), their ionic conductivity is low, with values ranging from 3.6·10 –3 to 9.3·10 –2 mS·cm –1 at 25 °C, thus limiting their suitability as electrolytes, for instance, for lithium-ions batteries applications. Similar diffusion coefficients for Li + and TFSI – ions suggest the formation of long-lived ion pairs moving as a neutral species. As a result, future research aims to introduce additives to disrupt contact ion pairs and enhance transport properties, leveraging the sustainable appeal of DES and their use in advanced energy storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Unveiling the transport properties of protic ionic liquids: Lithium ion dynamics modulated by the anion fluorine reservoir

Protic ionic liquids (PILs) show great potential as electrolyte components for energy storage devices. A comprehensive understanding of their transport properties must be achieved to optimize the design of safer and efficient electrolytes. This study focuses on a series of PILs based on the DBUH + cation (protonated 1,8-diazabicyclo[5,4,0]–undec-7-ene superbase) and three anions derived from strong acids: TFO – (triflate), IM14 – (perfluorobutyl-trifluoromethylsulfonylimide) and TFSI – (bis(trifluoromethylsulfonyl)imide). Neat PILs and PILs doped with LiTFO, LiIM14, and LiTFSI were studied using temperature-dependent NMR diffusion and relaxation techniques. The ionicity of these systems was also evaluated. Results revealed that the dynamic behaviour of lithium ions, as well as ionicity, strongly depend on the structural features of the anions, particularly in the case of IM14 – , whose main feature is the uneven distribution of the fluorinated sidegroups. The 19 F relaxation rates in IM14 – provide insights into the rotational reorientation of that anion. DBUH-IM14 exhibited diffusion coefficients lower than the expected ones on the basis of its viscosity, likely due to fluorophilic intermolecular interactions involving the fluorinated terminal groups. The presence of Li + in the DBUH-IM14 electrolyte led to unexpected and relatively faster translational mobility of Li + ions, resulting in a higher lithium apparent transference number. However, the trends observed in ionicity indicate a more complex interplay between intermolecular interactions and ion correlations. While DBUH-TFSI showed minimal effect of Li + addition, DBUH-TFO and DBUH-IM14 exhibited a significant decrease in ionicity, possibly attributed to strong interactions between ions.

25 ENERGY STORAGE↗

DOE OSTI2023

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗

DOE OSTI2021

CO 2 utilization in built environment via the P CO 2 swing carbonation of alkaline solid wastes with different mineralogy

Carbon mineralization to solid carbonates is one of the reaction pathways that can not only utilize captured CO 2 but also potentially store it in the long term. In this study, the dissolution and carbonation behaviors of alkaline solid wastes (i.e., waste concrete) was investigated. Concrete is one of the main contributors to a large carbon emission in the built environment. Thus, the upcycling of waste concrete via CO 2 utilization has multifaceted environmental benefits including CO 2 emission reduction, waste management and reduced mining. Unlike natural silicate minerals such as olivine and serpentine, alkaline solid wastes including waste concrete are highly reactive, and thus, their dissolution and carbonation behaviors vary significantly. Here, both conventional acid (e.g., hydrochloric acid) and less studied carbonic acid (i.e., CO 2 saturated water) solvent systems were explored to extract Ca from concrete. Non-stoichiometric dissolution behaviors between Ca and Si were confirmed under far-from-equilibrium conditions (0.1 wt% slurry density), and the re-precipitation of the extracted Si was observed at near-equilibrium conditions (5 wt% slurry density), when the Ca extraction was performed at a controlled pH of 3. These experiments, with a wide range of slurry densities, provided valuable insight into Si re-precipitation phenomena and its effect on the mass transfer limitation during concrete dissolution. Next, the use of the partial pressure of CO 2 for the pH swing carbon mineralization process was investigated for concrete, and the results were compared to those of Mg-bearing silicate minerals. In the P CO 2 swing process, the extraction of Ca was significantly limited by the precipitation of the carbonate phase (i.e., calcite), since CO 2 bubbling could not provide a low enough pH condition for concrete–water–CO 2 systems. Furthermore, this study showed that the two-step carbon mineralization via P CO 2 swing, that has been developed for Mg-bearing silicate minerals, may not be viable for highly reactive Ca-bearing silicate materials (e.g., concrete). The precipitated calcium carbonate (PCC) derived from waste concrete via a pH swing process showed very promising results with a high CO 2 utilization potential as an upcycled construction material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

29 Si solid state MAS NMR study on leaching behaviors and chemical stability of different Mg-silicate structures for CO 2 sequestration

Silicon is one of the most earth abundant elements, and thus, the fate and reactivity of silicate materials are often important for various energy and environmental technologies including carbon sequestration, where CO 2 is captured and stored as a thermodynamically stable solid carbonate phase. Thus, understanding the structures and chemistries of different silicate phases has become an important research aim. Here in this study, the changes in the silicate structures (Q 0 –Q 4 ) of heat-treated Mg-bearing mineral (serpentine) exposed to a CO 2 -water system (carbonic acid) was investigated using 29 Si MAS NMR, XRPD and ICP-OES and the identified structures were employed to explain complex leaching behaviors of silicate materials. The 29 Si MAS NMR and XRPD analysis indicated that the heat-treated serpentine is a mixture of amorphous (Q 1 : dehydroxylate I, Q 2 : enstatite, Q 4 : silica) and crystalline (Q 0 : forsterite, Q 3 : dehydroxylate II and serpentine) phase, while natural serpentine mineral has single crystalline Q 3 silicate structure. The leaching experiments showed that both Mg and Si in the amorphous silicate structures (Q 1 : dehydroxylate I, Q 2 : enstatite) are more soluble than those in crystalline phase (Q 0 : forsterite, Q 3 : dehydroxylate II and serpentine). Therefore, tuning the silicate structure towards Q 1 and Q 2 would significantly improve carbon sequestration potential of silicate minerals, whereas silicate materials with Q 3 structure would provide great chemical stabilities in acidic conditions. The solubilities of silicate structures were in the order of Q 1 (dehydroxylate I) > Q2 (enstatite) >> Q0 (forsterite) > Q3 (dehydroxylate II) > Q 3 (serpentine) and this finding can be used to better design a wide range of energy and environmental materials and reaction systems.

25 ENERGY STORAGE↗