Search NASA⌕ Search

Engineering topics

Stanford, Michael G.

Publications and source records attributed to Stanford, Michael G..

At least 19 records

Combinatorial Cu-Ni Alloy Thin-Film Catalysts for Layer Number Control in Chemical Vapor-Deposited Graphene

We synthesized a combinatorial library of CuxNi1−x alloy thin films via co-sputtering from Cu and Ni targets to catalyze graphene chemical vapor deposition. The alloy morphology, composition, and microstructure were characterized via scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), and X-ray diffraction (XRD), respectively. Subsequently, the CuxNi1−x alloy thin films were used to grow graphene in a CH4-Ar-H2 ambient at atmospheric pressure. The underlying rationale is to adjust the CuxNi1−x composition to control the graphene. Energy dispersive x-ray spectroscopy (EDS) analysis revealed that a continuous gradient of CuxNi1−x (25 at. % < x < 83 at.%) was initially achieved across the 100 mm diameter substrate (~0.9%/mm composition gradient). The XRD spectra confirmed a solid solution was realized and the face-centered cubic lattice parameter varied from ~3.52 to 3.58 A˙, consistent with the measured composition gradient, assuming Vegard’s law. Optical microscopy and Raman analysis of the graphene layers suggest single layer growth occurs with x > 69 at.%, bilayer growth dominates from 48 at.% < x < 69 at.%, and multilayer (≥3) growth occurs for x < 48 at.%, where x is the Cu concentration. Finally, a large area of bi-layer graphene was grown via a CuxNi1−x catalyst with optimized catalyst composition and growth temperature.

2D materials↗

Ultrafast and Controllable Phase Evolution by Flash Joule Heating

Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging. Here, we report the solvent-free FJH synthesis of three different fluorinated carbon allotropes: fluorinated nanodiamonds, fluorinated turbostratic graphene and fluorinated concentric carbon. This is done by millisecond flashing of organic fluorine compounds and fluoride precursors. Spectroscopic analysis confirms the modification of the electronic states and the existence of various short-range and long-range orders in the different fluorinated carbon allotropes. As a result, the flash time-dependent relationship is further demonstrated to control the phase evolution and product compositions.

01 COAL, LIGNITE, AND PEAT↗

Millisecond Conversion of Metastable 2D Materials by Flash Joule Heating

Controllable phase engineering is vital for precisely tailoring material properties since different phase structures have various electronic states and atomic arrangements. Rapid synthesis of thermodynamically metastable materials, especially two-dimensional metastable materials, with high efficiency and low cost remains a large challenge. Here we report flash Joule heating (FJH) as an electrothermal method to achieve the bulk conversion of transition metal dichalcogenides, MoS 2 and WS 2 , from 2H phases to 1T phases in milliseconds. The conversions can reach up to 76% of flash MoS 2 using tungsten powder as conductive additive. Different degrees of phase conversion can be realized by controlling the FJH conditions, such as reaction duration and additives, which allows the study of ratio-dependent properties. First-principles calculations confirm that structural processes associated with the FJH, such as vacancy formation and charge accumulation, result in stabilization of the 1T phases. Furthermore, FJH offers rapid access to bulk quantities of the hitherto hard-to-access 1T phases, a promising method for further fundamental research and diverse applications of metastable phases.

2D materials↗

Flash Graphene Morphologies

Flash Joule heating (FJH) can convert almost any carbon-based precursor into bulk quantities of graphene. This work explores the morphologies and properties of flash graphene (FG) generated from carbon black. It is shown that FG is partially comprised of sheets of turbostratic FG (tFG) that have a rotational mismatch between neighboring layers. The remainder of the FG is wrinkled graphene sheets that resemble non-graphitizing carbon. To generate high quality tFG sheets, a FJH duration of 30 – 100 ms is employed. Beyond 100 ms, the turbostratic sheets have time to AB-stack and form bulk graphite. Atomistic simulations reveal that generic thermal annealing yields predominantly wrinkled graphene which displays minimal to no alignment of graphitic planes, as opposed to the high-quality tFG that might be formed under the direct influence of current conducted through the material. As a result, the tFG was easily exfoliated via shear, hence the FJH process has the potential for bulk production of tFG without the need for pre-exfoliation using chemicals or high energy mechanical shear.

01 COAL, LIGNITE, AND PEAT↗

Direct Write of 3D Nanoscale Mesh Objects with Platinum Precursor via Focused Helium Ion Beam Induced Deposition

The next generation optical, electronic, biological, and sensing devices as well as platforms will inevitably extend their architecture into the 3rd dimension to enhance functionality. In focused ion beam induced deposition (FIBID), a helium gas field ion source can be used with an organometallic precursor gas to fabricate nanoscale structures in 3D with high-precision and smaller critical dimensions than focused electron beam induced deposition (FEBID), traditional liquid metal source FIBID, or other additive manufacturing technology. In this work, we report the effect of beam current, dwell time, and pixel pitch on the resultant segment and angle growth for nanoscale 3D mesh objects. We note subtle beam heating effects, which impact the segment angle and the feature size. Additionally, we investigate the competition of material deposition and sputtering during the 3D FIBID process, with helium ion microscopy experiments and Monte Carlo simulations. Our results show complex 3D mesh structures measuring ~300 nm in the largest dimension, with individual features as small as 16 nm at full width half maximum (FWHM). These assemblies can be completed in minutes, with the underlying fabrication technology compatible with existing lithographic techniques, suggesting a higher-throughput pathway to integrating FIBID with established nanofabrication techniques.

36 MATERIALS SCIENCE↗

Pulsed Laser-Assisted Helium Ion Nanomachining of Monolayer Graphene—Direct-Write Kirigami Patterns

A helium gas field ion source has been demonstrated to be capable of realizing higher milling resolution relative to liquid gallium ion sources. One drawback, however, is that the helium ion mass is prohibitively low for reasonable sputtering rates of bulk materials, requiring a dosage that may lead to significant subsurface damage. Manipulation of suspended graphene is, therefore, a logical application for He+ milling. We demonstrate that competitive ion beam-induced deposition from residual carbonaceous contamination can be thermally mitigated via a pulsed laser-assisted He+ milling. By optimizing pulsed laser power density, frequency, and pulse width, we reduce the carbonaceous byproducts and mill graphene gaps down to sub 10 nm in highly complex kiragami patterns.

36 MATERIALS SCIENCE↗

Atmospheric and Long-term Aging Effects on the Electrical Properties of Variable Thickness WSe 2 Transistors

Atmospheric and long-term aging effects on electrical properties of WSe 2 transistors with various thicknesses are examined. While countless published studies report electrical properties of transition-metal dichalcogenide materials, many are not attentive to testing environment or to age of samples, which we have found significantly impacts results. Our as-fabricated exfoliated WSe 2 pristine devices are predominantly n-type, which is attributed to selenium vacancies. Transfer characteristics of as-fabricated devices measured in air then vacuum reveal physisorbed atmospheric molecules significantly reduced n-type conduction in air. First-principles calculations suggest this short-term reversible atmospheric effect can be attributed primarily to physisorbed H 2 O on pristine WSe 2 , which is easily removed from the pristine surface in vacuum due to the low adsorption energy. Devices aged in air for over 300 h demonstrate irreversibly increased p-type conduction and decreased n-type conduction. Moreover, they develop an extended time constant for recovery of the atmospheric adsorbents effect. Short-term atmospheric aging (up to approximately 900 h) is attributed to O 2 and H 2 O molecules physisorbed to selenium vacancies where electron transfer from the bulk and adsorbed binding energies are higher than the H 2 O-pristine WSe2. The residual/permanent aging component is attributed to electron trapping molecular O 2 and isoelectronic O chemisorption at selenium vacancies, which also passivates the near-conduction band gap state, p-doping the material, with very high binding energy. All effects reflected have the expected thickness dependence, namely, thinner devices are more sensitive to atmospheric and long-term aging effects.

36 MATERIALS SCIENCE↗

Emerging nanofabrication and quantum confinement techniques for 2D materials beyond graphene

Abstract Recent advances in growth techniques have enabled the synthesis of high-quality large area films of 2D materials beyond graphene. As a result, nanofabrication methods must be developed for high-resolution and precise processing of these atomically thin materials. These developments are critical both for the integration of 2D materials in complex, integrated circuitry, as well as the creation of sub-wavelength and quantum-confined nanostructures and devices which allow the study of novel physical phenomena. In this review, we summarize recent advances in post-synthesis nanopatterning and nanofabrication techniques of 2D materials which include (1) etching techniques, (2) atomic modification, and (3) emerging nanopatterning techniques. We detail novel phenomena and devices which have been enabled by the recent advancement in nanofabrication techniques and comment on future outlook of 2D materials beyond graphene.

Stanford, Michael G.↗

High-Fidelity 3D-Nanoprinting via Focused Electron Beams: Computer-Aided Design (3BID)

Currently, there are few techniques that allow true 3D-printing on the nanoscale. The most promising candidate to fill this void is focused electron-beam-induced deposition (FEBID), a resist-free, nanofabrication compatible, direct-write method. The basic working principles of a computer-aided design (CAD) program (3BID) enabling 3D-FEBID is presented and simultaneously released for download. The 3BID capability significantly expands the currently limited toolbox for 3D-nanoprinting, providing access to geometries for optoelectronic, plasmonic, and nanomagnetic applications that were previously unattainable due to the lack of a suitable method for synthesis. In conclusion, the CAD approach supplants trial and error toward more precise/accurate FEBID required for real applications/device prototyping.

3D-nanoprinting↗

High Conduction Hopping Behavior Induced in Transition Metal Dichalcogenides by Percolating Defect Networks: Toward Atomically Thin Circuits

Atomically thin circuits have recently been explored for applications in next‐generation electronics and optoelectronics and have been demonstrated with 2D lateral heterojunctions. In order to form true 2D circuitry from a single material, electronic properties must be spatially tunable. Here, tunable transport behavior is reported which is introduced into single layer tungsten diselenide and tungsten disulfide by focused He + irradiation. Pseudometallic behavior is induced by irradiating the materials with a dose of ≈1 × 10 16 He + cm −2 to introduce defect states, and subsequent temperature‐dependent transport measurements suggest a nearest neighbor hopping mechanism is operative. Scanning transmission electron microscopy and electron energy loss spectroscopy reveal that Se is sputtered preferentially, and extended percolating networks of edge states form within WSe 2 at a critical dose of 1 × 10 16 He + cm −2 . First‐principle calculations confirm the semiconductor‐to‐metallic transition of WSe 2 after pore and edge defects are introduced by He + irradiation. The hopping conduction is utilized to direct‐write resistor loaded logic circuits in WSe 2 and WS 2 with a voltage gain of greater than 5. Edge contacted thin film transistors are also fabricated with a high on/off ratio (>10 6 ), demonstrating potential for the formation of atomically thin circuits.

Stanford, Michael G.↗

High-performance multilayer WSe 2 field-effect transistors with carrier type control

In this paper, high-performance multilayer WSe 2 field-effect transistor (FET) devices with carrier type control are demonstrated via thickness modulation and a remote oxygen plasma surface treatment. Carrier type control in multilayer WSe 2 FET devices with Cr/Au contacts is initially demonstrated by modulating the WSe 2 thickness. The carrier type evolves with increasing WSe 2 channel thickness, being p-type, ambipolar, and n-type at thicknesses <3, ~4, and >5 nm, respectively. The thickness-dependent carrier type is attributed to changes in the bandgap of WSe 2 as a function of the thickness and the carrier band offsets relative to the metal contacts. Furthermore, we present a strong hole carrier doping effect via remote oxygen plasma treatment. It non-degenerately converts n-type characteristics into p-type and enhances field-effect hole mobility by three orders of magnitude. Finally, this work demonstrates progress towards the realization of high-performance multilayer WSe 2 FETs with carrier type control, potentially extendable to other transition metal dichalcogenides, for future electronic and optoelectronic applications.

36 MATERIALS SCIENCE↗

Review Article: Advanced nanoscale patterning and material synthesis with gas field helium and neon ion beams

Focused ion beam nanoscale synthesis has emerged as a critical tool for selected area nanofabrication. Helium and neon ion beams from the gas field ion source have recently demonstrated unparalleled resolution among other scanning ion beams. In this review, the authors focus on the nanoscale synthesis applications for these ion species which have been demonstrated to date. The applications and recent work can broadly be grouped into the following categories: (1) Monte Carlo simulations, (2) direct-write milling or sputtering, (3) ion beam lithography, (4) selective ion implantation or defect introduction, and (5) gas-assisted processing. A special emphasis is given toward using He+ and Ne+ for the processing of two dimensional materials, as several groups have demonstrated promising results. Finally, the authors will discuss the future outlook of He+ and Ne+ nanoprocessing techniques and applications.

Stanford, Michael G.↗

3D Nanoprinting via laser-assisted electron beam induced deposition: growth kinetics, enhanced purity, and electrical resistivity

Here, we investigate the growth, purity, grain structure/morphology, and electrical resistivity of 3D platinum nanowires synthesized via electron beam induced deposition with and without an in situ pulsed laser assist process which photothermally couples to the growing Pt–C deposits. Notably, we demonstrate: 1) higher platinum concentration and a coalescence of the otherwise Pt–C nanogranular material, 2) a slight enhancement in the deposit resolution and 3) a 100-fold improvement in the conductivity of suspended nanowires grown with the in situ photothermal assist process, while retaining a high degree of shape fidelity.

36 MATERIALS SCIENCE↗

Tungsten Diselenide Patterning and Nanoribbon Formation by Gas‐Assisted Focused‐Helium‐Ion‐Beam‐Induced Etching

A gas‐assisted focused‐helium‐ion beam‐induced etching (FIBIE) process is introduced, which accelerates direct‐write patterning of WSe 2 relative to standard ion milling. The etching process utilizes the XeF 2 precursor molecule to provide a chemical assist for enhanced material removal relative to ion sputtering. The FIBIE process enables high‐fidelity patterning of WSe 2 with doses 5× lower than standard He + milling. This enables the formation of high‐resolution WSe 2 nanoribbons with dimensions less than 10 nm. The WSe 2 nanoribbons demonstrate high Raman anisotropy and nanoribbon electrical measurements are reported for the first time. The normalized on‐currents of field‐effect transistors reveal that the electron and hole currents are both suppressed and scale with the nanoribbon width, with the electron transport experiencing more degradation. However, on‐currents of nanoribbons created by the FIBIE process remain orders of magnitude greater than nanoribbons formed by standard He + milling. Scanning transmission electron microscopy and complementary Monte Carlo ion–solid simulations reveal that the reduced currents are partially due to ion‐induced damage in the WSe 2 .

Stanford, Michael G.↗

Laser-assisted focused He + ion beam induced etching with and without XeF 2 gas assist

Focused helium ion (He + ) milling has been demonstrated as a high-resolution nanopatterning technique; however, it can be limited by its low sputter yield as well as the introduction of undesired subsurface damage. Here, we introduce pulsed laser- and gas-assisted processes to enhance the material removal rate and patterning fidelity. A pulsed laser-assisted He+ milling process is shown to enable high-resolution milling of titanium while reducing subsurface damage in situ. Gas-assisted focused ion beam induced etching (FIBIE) of Ti is also demonstrated in which the XeF 2 precursor provides a chemical assist for enhanced material removal rate. In conclusion, a pulsed laser-assisted and gas-assisted FIBIE process is shown to increase the etch yield by ~9× relative to the pure He+ sputtering process. These He + induced nanopatterning techniques improve material removal rate, in comparison to standard He + sputtering, while simultaneously decreasing subsurface damage, thus extending the applicability of the He + probe as a nanopattering tool.

36 MATERIALS SCIENCE↗

Nanoforging Single Layer MoSe 2 Through Defect Engineering with Focused Helium Ion Beams

Development of devices and structures based on the layered 2D materials critically hinges on the capability to induce, control, and tailor the electronic, transport, and optoelectronic properties via defect engineering, much like doping strategies have enabled semiconductor electronics and forging enabled introduction of iron age. Here, we demonstrate the use of a scanning helium ion microscope (HIM) for tailoring the functionality of single layer MoSe 2 locally, and decipher associated mechanisms at atomic level. We demonstrate He + beam bombardment that locally creates vacancies, shifts the Fermi energy landscape and thereby increases the Young s modulus of elasticity. Furthermore, we observe for the first time, an increase in the B-exciton photoluminescence signal from the nanoforged regions at room temperature. In conclusion, the approach for precise defect engineering demonstrated here opens opportunities for creating functional 2D optoelectronic devices with a wide range of customizable properties that include operating in the visible region.

42 ENGINEERING↗

Simulation-Guided 3D Nanomanufacturing via Focused Electron Beam Induced Deposition

Focused electron beam induced deposition (FEBID) is one of the few techniques that enables direct-write synthesis of free-standing 3D nanostructures. While the fabrication of simple architectures such as vertical or curving nanowires has been achieved by simple trial and error, processing complex 3D structures is not tractable with this approach. This is due, inpart, to the dynamic interplay between electron–solid interactions and the transient spatial distribution of absorbed precursor molecules on the solid surface. Here, we demonstrate the ability to controllably deposit 3D lattice structures at the micro/nanoscale, which have received recent interest owing to superior mechanical and optical properties. Moreover, a hybrid Monte Carlo–continuum simulation is briefly overviewed, and subsequently FEBID experiments and simulations are directly compared. Finally, a 3D computer-aided design (CAD) program is introduced, which generates the beam parameters necessary for FEBID by both simulation and experiment. In using this approach, we demonstrate the fabrication of various 3D lattice structures using Pt-, Au-, and W-based precursors.

3D nanoprinting↗