Search NASA⌕ Search

Engineering topics

Stanton, R. H.

Publications and source records attributed to Stanton, R. H..

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

The GRACE Mission: Meeting the Technical Challenges

The Gravity Recovery and Climate Experiment (GRACE) Mission is scheduled for launch in June 2001. Within the first year of the GRACE Mission, the project has a minimum science requirement to deliver a new model of the Earth's static geoid with an error of less than 1 cm to spherical harmonic degree seventy (70). However, the performance of the GRACE Mission is designed to exceed this minimum requirement by a factor of 25 or more. For spherical harmonic degrees of up to 40, we expect to improve the current knowledge of the gravity field by one thousand (1000x). The GRACE Mission uses the satellite-to-satellite tracking (SST) technique. The twin GRACE satellites are the instruments that measure the nonuniformities in the Earth's gravity field. Nonuniformities in the gravity field cause the relative distance between the centers-of-mass of the two satellites to vary as they fly over the Earth. Atmospheric drag is the largest non-gravitational disturbing force. Drag is measured and will be used to correct changes in the satellite-to-satellite range measured by an SST microwave link. The microwave link will measure changes in the range between the two GRACE satellites with an error approaching 1 micron. We will discuss how these instrumentation requirements affect the configuration, the mass balance, the thermal control and the aerodynamic design of the satellites, and the design of the microwave SST link and the accelerometer. Finally, the question of how noise in these components limits the overall accuracy of the gravity models will be addressed.

Davis, E. S.↗
NASA NTRS1987

The development of a charge-coupled device tracker for spacecraft

Charge-coupled device (CCD) optical sensors have made it possible to construct high performance star and target trackers for spacecraft. The Advanced Star and Target Reference Orbital Sensor (ASTROS) trackers have been developed by JPL for the Shuttle-based astronomical flight Astro-1 and the Mariner Mark II (MMII) spacecraft. For the Shuttle application the tracker will provide the data for high precision instrument pointing and for the MMII application the tracker will provide stellar and extended target tracking data for flyby and rendezvous navigation. The specifications, architecture, and testing program for these trackers will be described. Laboratory measurements have demonstrated that these trackers can be very effective. The versatility and flexibility of the ASTROS type trackers will permit adaptation to a variety of navigation and guidance applications. These trackers represent one of the technologically advanced components that will be used in the development of the next generation of spacecraft.

Dennison, E. W.↗
NASA NTRS1986

ASTROS - High-performance CCD tracker for spacecraft

The architecture, capabilities, and testing of the Advanced Star and Target Reference Optical Sensor (ASTROS) I and II are described. The ASTROS I tracker is to be utilized for a UV telescope experiment on a Shuttle flight and is capable of measuring pointing errors of 1.5 microrad, and the ASTROS II tracker is being developed for the Mariner Mark II spacecraft to perform tracking, guiding, and optical navigation functions. The requirements for the two trackers are compared. Consideration is given to star and target tracking, optical navigation, and mass and power constraints. The compositions of the trackers, in particular the sensor, electrode drives, amplifiers and signal clamp, video signal processor, control and timing generator, memories, microprocessor, and interface, are examined.

Dennison, E. W.↗
NASA NTRS1985

Measuring Tracking Accuracy of CCD Imagers

Tracking accuracy and resolution of charge-coupled device (CCD) imaging arrays measured by instrument originally developed for measuring performance of star-tracking telescope. Operates by projecting one or more artifical star images on surface of CCD array, moving stars in controlled patterns, and comparing star locations computed from CCD outputs with those calculated from step coordinates of micropositioner.

Stanton, R. H.↗
NASA NTRS1985

Acquisition and track algorithms for the Astros star tracker

The Astros star tracker has been designed for an employment with the Space Shuttle. An achievement of the performance levels needed has required critical trade-offs between the hardware design and the control algorithms. This paper provides a description of the development of the acquisition and track algorithms. Attention is given to an Astros system overview, a system firmware description, cluster evaluation, guide star selection, exposure time determination, video data input, update interval timing, exposure time sequencing full frame video A/D conversion, analog threshold for acquisition, minimum threshold determination, and the theoretical basis for the track algorithm.

Shalom, E.↗
NASA NTRS1984

ASTROS - A sub-arcsec CCD star tracker

The design and application of ASTROS (Advanced Star and Target Reference Optical Sensor) are described, with emphasis on performance test results acquired with a prototype system. The ASTROS tracker provides extremely precise measurements of star image coordinates as inputs to the Image Motion Compensation (IMC) system used to stabilize the science instrument focal planes. Performance levels achieved are dramatic improvements over the levels achieved with image dissector designs with comparable fields of view.

Stanton, R. H.↗
NASA NTRS1984

Inertially referenced instrument pointing platform with momentum compensated articulation

The characteristics of the Mariner Mark II Integrated Platform Pointing and Attitude Control System (IPPACS) microstep actuator with momentum compensation and the IPPACS optical reference tracker are examined, and the advantages of this new technology are identified. The momentum-compensated articulation acts to prevent platform articulation activity from disturbing the spacecaft. This guarantees dynamic stability, ensures a quiescent pointing environment, and decouples the design of the platform from the design of the spacecraft. A microstep actuator with harmonic drive provides platform angular step resolution to 0.5 arcsec for precision pointing of instruments. An optical reference tracker boresighted with scientific instruments guarantees accurate target-referenced closed-loop pointing. An IPPACS star and target tracker with 1 to 10 arcsec accuracy and wide 11 x 17 degrees field of view has been derived from Advanced Star and Target Reference Optical Sensor (ASTROS) CCD star tracker technology, greatly enhancing the optical referencing capabilities of future multimission interplanetary spacecraft.

Bell, C. E.↗
NASA NTRS1981

A CCD tracker for closed-loop instrument pointing at Halley's comet

An optical tracker based on CCD technology has been developed for the closed-loop pointing of the narrow-angle imaging system of the proposed Halley's comet intercept mission at the comet nucleus. The target tracker, needed to assure the accurate pointing of science instruments as the nucleus rapidly passes the spacecraft, is a component of the pointing control system, which also includes a two-axis articulated instrument platform and high-resolution optical encoders to measure platform orientation relative to spacecraft structure. The device was designed on the basis of a CCD imaging array to calculate target centroid position based on the optical intensity of all pixels containing the image, and a processor to perform spacecraft attitude control, pointing control and target tracker control and data processing functions. The tracker has been configured to operate in both target acquisition and tracking modes. Preliminary simulation results and past experiments on similar trackers indicate that excellent tracking performance can be achieved, and a breadboard version of the tracker is currently being fabricated.

Stanton, R. H.↗
NASA NTRS1979

CCD sensors for spacecraft optical navigation

The optical navigation process uses spaceborne measurements of the apparent direction vector from the spacecraft to a target body, (planet, satellite, star, etc.) to improve estimates of the spacecraft trajectory. Ground-based controllers assimilate the optical measurements, together with spacecraft radio-tracking data and target ephemeris data, to generate a best estimate of the trajectory relative to the target. The present paper deals with a development program supporting the use of (solid state) CCD (Charged Coupled Device) imagers for spacecraft navigation. It is shown that stars can be detected that are two to three magnitudes fainter than with an equivalent vidicon based instrument, that effects of global response nonuniformity and dark current spikes can be essentially eliminated from the data as a result of the reproducibility of both effects, and that charge trailing during readout of star image data can lead to position measurement errors.

Eisenman, A. R.↗
NASA NTRS1979

A CCD star sensor for fine pointing control of spaceborne telescopes

A star sensor for measuring small pointing errors in astronomical telescopes is described. By using solid state imaging arrays (CCDs) to track guide star images, this design realizes a number of performance advantages relative to more conventional approaches. Specific topics include star image position measurement, CCD sensitivity including color effects, and performance simulation results. Experimental results for CCDs operating at temperatures below 100 K are also summarized. Two telescope configurations are considered to illustrate the range of possible applications of this technology: (1) a large orbiting telescope for general astronomy requiring a multi-CCD sensor, and (2) a Space Shuttle-based infrared observatory operating at 20 K. Although the requirements and configurations of these applications are widely different, the CCD approach offers substantial advantages to both systems.

Stanton, R. H.↗
NASA NTRS1976

Optical guidance vidicon test program

A laboratory and field test program was conducted to quantify the optical navigation parameters of the Mariner vidicons. A scene simulator and a camera were designed and built for vidicon tests under a wide variety of conditions. Laboratory tests characterized error sources important to the optical navigation process and field tests verified star sensitivity and characterized comet optical guidance parameters. The equipment, tests and data reduction techniques used are described. Key test results are listed. A substantial increase in the understanding of the use of selenium vidicons as detectors for spacecraft optical guidance was achieved, indicating a reduction in residual offset errors by a factor of two to four to the single pixel level.

Eiseman, A. R.↗
NASA NTRS1975

Demonstration of optical navigation measurements on Mariner 10

An experiment was performed on the Mariner 10 Venus/Mercury mission to assess the performance of the onboard television cameras and ground-based software used in the optical navigation measurement system. The elements of the system, calibration, and distortion are considered. The navigation technique requires detection of stars in the same field of view as the target body. The star detection capability is discussed with reference to required threshold, calibration factors, standard conditions, camera sensitivity, response uniformity, and the effect of image smearing. Tests conducted during the Mariner 10 encounters with Mercury demonstrated that a large bright planet can be imaged simultaneously with faint stars to provide accurate navigation data. Improvements are suggested in the system for the Mariner Jupiter/Saturn 1977 and later missions.

Stanton, R. H.↗
NASA NTRS1972

Estimating trajectory correction requirements for multiple outer planet missions.

General approach to the problem of estimating trajectory correction requirements for multiple outer planet flyby missions when the navigation system uses onboard optical measurements made during approach to each target planet to complement the ground-based radio measurements. The accuracy and reliability of the onboard measurement system plays a critical role in sizing the trajectory correction capability required. An illustration of the combined use of radio and optical measurements is provided for the particular case of a Jupiter-Uranus-Neptune mission. Use of the statistical technique developed for computing the trajectory correction margin required to account for uncertainties in subsystem performance, permits trajectory correction savings of 100 to 20 m/sec over 'worst case' designs. This represents weight savings of about 50% of the science payload. For the example case trajectory correction requirements are estimated for two candidate optical systems and the radio alone case. The use of onboard measurements allows a trajectory correction savings of approximately 140 m/sec.

Friedman, L. D.↗
NASA NTRS1972

Estimating trajectory correction requirements for the Outer Planets Grand Tour missions.

The estimation of trajectory correction requirements for the Outer Planets Grand Tour (OPGT) missions poses a unique and many-faceted problem for the systems analyst. In this paper the navigation concept for the OPGT is developed and illustrated. The limiting accuracies and performance of the combined radio/onboard optical system are examined. The combined orbit determination system is characterized by its accuracy and by its system risks. Such considerations are included with the statistical combination of maneuver estimates to produce preliminary delta V estimates for the planned OPGT missions.

Friedman, L. D.↗