Engineering topics

Stark, J. P. W.

Publications and source records attributed to Stark, J. P. W..

4 records

NASA NTRS1991

Analysis of nozzle lip and backflow expansion of a small hydrazine thruster

Results are presented for computations made with the direct simulation Monte Carlo method for the expansion of the thick boundary layer of a small nozzle. The objective in the investigation is to assess the boundary-layer characteristics that most affect the flow properties of the expanding gas. In the computations, large degrees of species separation and thermal nonequilibrium are observed as the gas expands around the nozzle lip. These aspects of the flow indicate the necessity of treating the problem through a discrete particle approach. Assessment is made of the sensitivity of the calculated results to the form of the boundary layer initially assumed. It is found that the amount of backflow is related to the flow temperature close to the wall. Therefore, the opportunity presents itself for the reduction of the impingement potential of such thrusters through appropriate design considerations. Experimental procedures for verification of the type of computations undertaken in the current study are discussed. It is proposed that the calculations made in the backflow region offer the best opportunity.

Boyd, Iain D.↗

NASA NTRS1989

Assessment of impingement effects in the isentropic core of a small satellite control thruster plume

Two computational techniques commonly employed in the calculation of rocket and thruster expansion plumes are assessed. These are the method of characteristics (MOC), which is derived from the continuum Euler equations, and the direct simulation Monte Carlo (DSMC) method, which adopts a discrete particle approach. These techniques vary both in the computational expense and in the accuracy and detail of the solutions that they provide, depending upon the regime of application. The assessment is made with reference to the plume expanding from a small monopropellant hydrazine thruster and concentrates on the isentropic core of the jet for the flow regime lying between the continuum and free molecular limits. It is found that the more numerically intensive DSMC method offers the better correspondence to the available experimental data. In addition, large differences in typical impingement effects such as drag force and heat transfer are found at the free molecular limit of the plume expansion for the two predictive techniques. It is concluded that accurate estimation of impingement potential may only be achieved through application of the discrete particle method.

Boyd, I. D.↗

NASA NTRS1989

Modification of the Simons model for calculation of nonradial expansion plumes

The Simons model is a simple model for calculating the expansion plumes of rockets and thrusters and is a widely used engineering tool for the determination of spacecraft impingement effects. The model assumes that the density of the plume decreases radially from the nozzle exit. Although a high degree of success has been achieved in modeling plumes with moderate Mach numbers, the accuracy obtained under certain conditions is unsatisfactory. A modification made to the model that allows effective description of nonradial behavior in plumes is presented, and the conditions under which its use is preferred are prescribed.

Boyd, I. D.↗

NASA NTRS1989

Statistical fluctuations in Monte Carlo calculations

The time counter and modified Nanbu simulation techniques are analyzed, with emphasis placed on the convergence of the calculations to a steady macroscopic state. Such variables as translational and rotational temperature, and flow velocity, sampled at several points in the flowfield, are considered. Both macroscopic averages and molecular distribution functions are analyzed. The calculation of inelastic collisions, in which transfer of energy between translational and internal energy modes is performed, is achieved through the use of the Larsen-Borgnakke phenomenological model. It is noted that, with reference to translational temperature, the time counter method shows less statistical scatter than that found with the modified Nanbu simulation technique.

Boyd, I. D.↗