Search NASA⌕ Search

Engineering topics

Starrett, Charles Edward

Publications and source records attributed to Starrett, Charles Edward.

At least 19 records

Excited states in warm and hot dense matter

Accurate modeling of warm and hot dense matter is challenging in part due to the multitude of excited states that must be considered. Here, we present a variational framework that models these excited states. In this framework an excited state is defined by a set of effective one-electron occupation factors, and the corresponding energy is defined by the effective one-body energy with an exchange and correlation term. Here, the variational framework is applied to an atom-in-plasma model (a generalization of the so-called average atom model). Comparisons with a density functional theory based average atom model generally reveal good agreement in the calculated pressure, but our model also gives access to the excitation energies and charge state distributions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The STAG code: A fully relativistic super transition array calculation using Green’s functions

Calculating opacities for a wide range of plasma conditions (i.e. temperature, density, element) requires detailed knowledge of the plasma configuration space and electronic structure. For plasmas composed of heavier elements, relativistic effects are important in both the electronic structure and the details of opacity spectra. We extend our previously described superconfiguration and super transition array capabilities (Gill et al., 2023) to include a fully relativistic formalism. Further, the use of hybrid bound-continuum supershells in our superconfigurations demonstrates the importance of a consistent treatment of bound and continuum electrons in dense plasma opacities, and we expand the discussion of these consequences to include issues associated with equation of state and electron correlations between bound and continuum electrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Uncertainty quantification for equations of state: copper as an example

Equations of state are essential for providing a fundamental description of materials properties in thermodynamic equilibrium and are used to provide closure relations for hydrodynamics simulations. Generally, equations of state rely on simple physics-based parameterized materials models to inform on the free energy of a material through out a given thermodynamic state space. Historically the parameters of these models have been tuned by hand to fit various experimental data. However, modern optimization and uncertainty quantification techniques allow us to quickly test thousands of parameter combinations and obtain meaningful uncertainty estimates on the parameters, opening opportunities for assessing systematic uncertainties in experiments, assessing model adequacy, and more. In this report, we use Bayesian inference to fit the solid (fcc) equation of state of copper. We focus on fitting five different experimental datasets, including the isobaric density, isobaric heat capacity, room temperature isotherm, principal isentrope, and principal Hugoniot. We fit all five data types simultaneously, and then explore the extent to which combinations of 2 subsets of the 5 datasets can constrain the EOS parameters, as compared to the fit to all 5. This information is useful for investigating the extent to which different datasets can con strain EOS models and thereby help guide experimental investigations in order to best constrain the EOS. We also discuss ways that the methodologies can be used to investigate systematic discrepancies between experiments, as well as how the methods can be used to assess model uncertainty. The framework we develop is general, in that it can be used with a variety of optimization or uncertainty quantification techniques and with a variety of data sources, including both experimental and ab-inito data.

97 MATHEMATICS AND COMPUTING↗

Average-atom model with Siegert states

In plasmas, electronic states can be well-localized bound states or itinerant free states, or something in between. In self-consistent treatments of plasma electronic structure such as the average-atom model, all states must be accurately resolved in order to achieve a converged numerical solution. Furthermore, this is a challenging numerical and algorithmic problem in large part due to the continuum of free states which is relatively expensive and difficult to resolve accurately. Siegert states are an appealing alternative. They form a complete eigenbasis with a purely discrete spectrum while still being equivalent to a representation in terms of the usual bound states and free states. However, many of their properties are unintuitive, and it is not obvious that they are suitable for self-consistent plasma electronic structure calculations. Here it is demonstrated that Siegert states can be used to accurately solve an average-atom model and offer advantages over the traditional finite-difference approach, including a concrete physical picture of pressure ionization and continuum resonances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A superconfiguration calculation of opacity with consistent bound and continuum electron treatments using green’s functions

One of the challenges in calculating the opacity of dense plasmas is the difficulty in consistently modeling electrons bound to nuclei and those that exist within the continuum of free states in electronic structure models. We address this issue by adapting the green's function approach, originally developed for use in average atom calculations, to the determination of superconfiguration (SC) electronic structure. The spectra created using these SCs indicate that a consistent treatment of continuum electronic structure is important for phenomena involving electrons near ionization thresholds, such as the pressure ionization of bound states and the opacity due to transitions near bound-free edges. Though important for dense plasmas, the detailed incorporation of continuum electrons into structure calculations does not have significant impact on the recent discrepancies between the predicted and measured opacity of hot, dense iron (Bailey et al 2015 Nature517 56). Here we find that the inclusion of plasma effects through an ion-sphere model along with our treatment of continuum electronic states gives a description of pressure ionization in hot, dense aluminum that is in better agreement with experiment than methods that rely on perturbative descriptions of the plasma environment (Hoarty et al 2013 Phys. Rev. Lett.110 265003).

74 ATOMIC AND MOLECULAR PHYSICS↗

Multi-Center Calculations of the Opacity at Very High Pressure [Slides]

Plasma effect are often treated perturbatively in opacity calculations. Could a self-consistent treatment of plasma effects significantly change the opacity? The conclusion is that "Self consistent plasma effects, at the DFT level, do not seem to improve agreement with data."

36 MATERIALS SCIENCE↗

Dense plasma opacity via the multiple-scattering method

The calculation of the optical properties of hot dense plasmas with a model that has self-consistent plasma physics is a grand challenge for high energy density science. Here we exploit a recently developed electronic structure model that uses multiple scattering theory to solve the Kohn-Sham density functional theory equations for dense plasmas. Here we calculate opacities in this regime, validate the method, and apply it to recent experimental measurements of opacity for Cr, Ni, and Fe. Good agreement is found in the quasicontinuum region for Cr and Ni, while the self-consistent plasma physics of the approach cannot explain the observed difference between models and the experiment for Fe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of ionic disorder on the principal shock Hugoniot

Here, the effect of ionic disorder on the principal Hugoniot is investigated using multiple scattering theory to very high pressure (Gbar). Calculations using molecular dynamics to simulate ionic disorder are compared to those with a fixed crystal lattice, for both carbon and aluminum. For the range of conditions considered here we find that ionic disorder has a relatively minor influence. It is most important at the onset of shell ionization and we find that, at higher pressures, the subtle effect of the ionic environment is overwhelmed by the larger number of ionized electrons with higher thermal energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-dependent density functional theory applied to average atom opacity

We focus on studying the opacity of iron, chromium, and nickel plasmas at conditions relevant to experiments carried out at Sandia National Laboratories. In this work, we calculate the photoabsorption cross sections and subsequent opacity for plasmas using linear-response time-dependent density functional theory (TD-DFT). Our results indicate that the physics of channel mixing accounted for in linear-response TD-DFT leads to an increase in the opacity in the bound-free quasicontinuum, where the Sandia experiments indicate that models underpredict iron opacity. However, the increase seen in our calculations is only in the range of 5%–10%. Further, we do not see any change in this trend for chromium and nickel. This behavior indicates that channel mixing effects do not explain the trends in opacity observed in the Sandia experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗

OpenSesame tutorial

OpenSesame is a program for generating tabular equations of state (EOS), with capabilities for multiphase EOS construction. In this tutorial, we provide an overview of how to run OpenSesame to construct a multiphase EOS. We discuss some general features of OpenSesame, followed by a description of sample input files required for multiphase EOS construction. We also discuss how to extract data from EOS tables in order to compare to experimental data, with an example using the OpenSesame GUI. Lastly, we provide a description of how to generate ASCII-formatted EOS tables most often used by hydro code users.

97 MATHEMATICS AND COMPUTING↗

New Conductive Opacities for White Dwarf Envelopes

Thanks to their continuous cooling and relative simplicity, white dwarf stars are routinely used to measure the ages of stellar populations. The usefulness of white dwarfs as cosmochronometers depends on the availability of accurate cooling models. A key ingredient of those models is conductive opacities, which largely govern the cooling rate. In this work, we present improved conductive opacities for the regime of moderate coupling and moderate degeneracy that characterizes an important portion of the envelopes of DA and DB white dwarfs. Here, we find differences of up to a factor of 3 between our calculations and the commonly used opacities of Cassisi et al., which we attribute to an improved account of electron–electron scattering. The cooling models are strongly affected by those changes in the conductive opacities: the age of a 4000 K white dwarf can be reduced by as much as 2 Gyr. We provide analytical fits to our new opacities to facilitate the implementation of this important effect in white dwarf evolution codes.

79 ASTRONOMY AND ASTROPHYSICS↗

Model for the electrical conductivity in dense plasma mixtures

A new density functional theory, average atom based model for the electrical conductivity of dense plasmas with a mixture of ion species, containing no adjustable parameters, is presented herein. The model takes the temperature, mass density and relative abundances of the species as input. It takes into account partial ionization, ionic structure, and core-valence orthogonality, and uses quantum mechanical calculations of cross sections. Comparison to an existing high fidelity but computationally expensive method reveals good agreement. The new model is computationally efficient and can reach high temperatures. A new mixing rule is also presented that gives reasonably accurate conductivities for high temperature plasma mixtures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlations between conduction electrons in dense plasmas

Most treatments of electron-electron correlations in dense plasmas either ignore them entirely (random phase approximation) or neglect the role of ions (jellium approximation). In this work, we go beyond both these approximations to derive a formula for the electron-electron static structure factor which properly accounts for the contributions of both ionic structure and quantum-mechanical dynamic response in the electrons. The result can be viewed as a natural extension of the quantum Ornstein-Zernike theory of ionic and electronic correlations, and it is suitable for dense plasmas in which the ions are classical and the conduction electrons are quantum-mechanical. Here, the corresponding electron-electron pair distribution functions are compared with the results of path integral Monte Carlo simulations, showing good agreement whenever no strong electron resonance states are present. We construct approximate potentials of mean force which describe the effective screened interaction between electrons. Significant deviations from Debye-Hückel screening are present at temperatures and densities relevant to high-energy density experiments involving warm and hot dense plasmas. The presence of correlations between conduction electrons is likely to influence the electron-electron contribution to the electrical and thermal conductivity. It is expected that excitation processes involving the conduction electrons (e.g., free-free absorption) will also be affected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mean-force scattering potential for calculating optical properties of dense plasmas

Here, we assess the relative importance of ionic structure on the opacity of dense plasmas by using the potential of mean force as a scattering potential within the Kubo-Greenwood formalism. We compare results from the potential of mean force, which includes realistic ionic structure, to results using an average atom potential, which includes only a crude treatment of ionic structure. Comparisons with less approximate but more expensive DFT-MD simulations for aluminum plasma reveal that the mean force generally improves agreement for DC conductivity. We also see improvement when applying the mean force to free-free transitions, whereas for bound-bound and bound-free transitions the mean force leads to poorer agreement on transition energies. Further, we assess the impact of accounting for correlations within the plasma at the temperature and density conditions relevant to iron opacity measurements at Sandia’s Z machine facility and find that these correlations do not account for the discrepancy between the measurements and leading opacity calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Wide ranging equation of state with Tartarus: A hybrid Green’s function/orbital based average atom code

Average atom models are widely used to make equation of state tables and for calculating other properties of materials over a wide range of conditions, from zero temperature isolated atom to fully ionized free electron gases. The numerical challenge of making these density functional theory based models work for any temperature, density or nuclear species is formidable. Here we present in detail a hybrid Green’s function/orbital based approach that has proved to be stable and accurate for wide ranging conditions. Algorithmic strategies are discussed. In particular the decomposition of the electron density into numerically advantageous parts is presented and a robust and rapid self consistent field method based on a quasi-Newton algorithm is given. Example application to the equation of state of lutetium (Z = 71) is explored in detail, including the effect of relativity, finite temperature exchange and correlation, and a comparison to a less approximate method. Furthermore, the hybrid scheme is found to be numerically stable and accurate for lutetium over at least 6 orders of magnitude in density and 5 orders of magnitude in temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗