Search NASA⌕ Search

Engineering topics

Startt, Jacob

Publications and source records attributed to Startt, Jacob.

Unlocking AlN Piezoelectric Performance with Earth‐Abundant Dopants

Abstract The increasing demand for high‐performance piezoelectric materials and toxicity and thermal stability issues of the widely used lead zirconate titanates (PZT) have spurred a search for better alternatives in electronic devices. In comparison to PZT, group III nitrides such as aluminum nitride (AlN), are only weakly piezoelectric, but doping AlN with scandium (Sc) improves the piezoelectric response by nearly 500%. Relative to PZT, doped‐AlN piezoelectric materials are advantageous because they are far more compatible with complementary metal–oxide–semiconductor (CMOS) materials, and they maintain both piezoelectric and thermodynamic stability up to very high temperatures. Unfortunately, rare‐earth metals are notoriously expensive, and fabricating stable films with rare‐earth dopants is also challenging, limiting their use in industrial applications. In this work, ab initio calculations are combined with targeted fabrication and experimentation to identify alternative earth‐abundant dopants for AlN from the periodic table d‐block. Amongst the 23 elements screened, it is found that group IVB metals, titanium, zirconium, and hafnium induce large piezoelectric enhancements comparable to Sc. This improvement is traced to shifts in the atomic sublattice structure and changes in the local charge states. In demonstrating a highly accessible and affordable path for technological adaptation of AlN‐based piezoelectrics, this work provides the foundation for sustainable, next‐generation electronics.

Startt, Jacob↗

Magnetic properties of equiatomic CrMnFeCoNi

Magnetic, specific heat, and structural properties of the equiatomic Cantor alloy system are reported for temperatures between 5 and 300 K, and up to fields of 70 kOe. Here magnetization measurements performed on as-cast, annealed, and cold-worked samples reveal a strong processing history dependence and that high-temperature annealing after cold working does not restore the alloy to a “pristine” state. Measurements on known precipitates show that the two transitions, detected at 43 and 85 K, are intrinsic to the Cantor alloy and not the result of an impurity phase. Experimental and ab initio density functional theory computational results suggest that these transitions are a weak ferrimagnetic transition and a spin-glass-like transition, respectively, and magnetic and specific heat measurements provide evidence of significant Stoner enhancement and electron-electron interactions within the material.

36 MATERIALS SCIENCE↗

Multi-Resolution Characterization of the Coupling Effects of Molten Salts, High Temperature and Irradiation on Intergranular Fracture

This project focused on providing a fundamental physico-chemical understanding of the coupling mechanisms of corrosion- and radiation-induced degradation at material-salt interfaces in Ni-based alloys operating in emulated Molten Salt Reactor(MSR) environments through the use of a unique suite of aging experiments, in-situ nanoscale characterization experiments on these materials, and multi-physics computational models. The technical basis and capabilities described in this report bring us a step closer to accelerate the deployment of MSRs by closing knowledge gaps related to materials degradation in harsh environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An electronic origin to the oscillatory segregation behavior in Ni-Cr and other BCC defects in FCC metals

Ni-Cr alloys exhibit oscillatory segregation behaviors near low index surfaces, in which the preferred segregation species changes from Ni in the first layer to Cr in the second layer. In many dilute-alloy systems, this oscillatory pattern is attributed to the elastic release of stresses in the local lattice around the segregating solute or impurity atom. These stresses are mostly thought to originate from mismatches in the atomic size of the solute and host atoms. In Ni-Cr alloys, however, an appreciable mismatch in atomic size is not present, leading to questions about the origins of the oscillatory behavior in this alloy. Therefore, using density functional theory, we have modeled the segregation of a single Cr atom in the and surfaces of FCC Ni, an alloy which exhibits this oscillatory behavior. Using Bader charge analysis, we show that the negative energy correlates directly with the amount of charge on the Cr atom. As Ni atoms strip valence charge from the Cr, the Cr contracts slightly in size. The greatest contraction and highest positive charge for the Cr occurs when it is in the second layer of the surface where the system exhibits the oscillating negative segregation energy. We then find that this behavior persists in other alloy systems (Ag-Nb, Cu-Cr, Pt-Nb, and Pt-V), which exhibit similar atomic radii and electronegativity differences between host and solute to Ni-Cr. These represent alloys in which the host metal exhibits an FCC ground-state structure while the solute metal exhibits a BCC ground-state structure.

36 MATERIALS SCIENCE↗

Ab-initio investigation of the effect of adsorbed salts on segregation of Cr at the Ni (100) surface

The dissolution and depletion of chromium (Cr) in salt facing nickel (Ni) alloy surfaces is one of the predominant degradation mechanisms of structural components in molten salt technology. Here, we use density functional theory to investigate the role of electronic level interactions that may underlie the depletion phenomenon of Cr in a Ni (100) surface exposed to various adsorbed salt species. Our results show that, under vacuum, Ni preferentially segregates to the surface layer. Conversely, in the presence of adsorbed anionic salt species (e.g., chlorine (Cl), fluorine (F) or the impurity oxygen (O)) Cr segregation becomes more favorable. In these cases, Cl has the weakest effect on segregation, while O has the strongest effect. Our analysis reveals the strong correlation between Cr segregation and the amount of valence charge transferred between the Cr atom and surface adsorbate: the greater the charge transfer, the lower the segregation energy. We also show that, when considered, secondary cations screen Cr-anion interactions, which in turn reduce the magnitude of the anions effect on segregation. These results shed light on the role of salt impurities likely play in the overall corrosion phenomena in molten salt environments. This work provides insights into the atomic level interactions fundamental to molten salt corrosion and on the importance of maintaining salt purity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vacancy surface migration mechanisms in dilute nickel-chromium alloys

We investigate the unitary mechanisms related to the surface migration of vacancies in dilute Ni-Cr alloys via first-principle calculations. We survey a complete set of surface and sub-surface migration paths for vacancies near the (100) free surface and calculate the corresponding migration barriers. Our results show that a vacancy migrating towards the free surface will face lower energy barriers to migrate via atomic exchange with a neighboring Cr atom rather than with a Ni atom. Once a vacancy reaches the free surface, it will be trapped there. Our results also reveal that, when a Cr atom sits in the atomic plane just below the free surface, any in-plane vacancy hopping jump that would result in the vacancy sitting on top a subsurface Cr atom is energetically unfavorable. Taken together, these fundamental unitary surface migration mechanisms offer insights into the complex interactions between surface segregation and vacancy migration phenomena in Ni-Cr-based alloys.

36 MATERIALS SCIENCE↗