Engineering topics

Stclair, T. L.

Publications and source records attributed to Stclair, T. L..

10 records

NASA NTRS1986

Acetylene (ethynyl) terminated polyimide siloxane and process for preparation thereof

Siloxane containing addition polyimides having improved physical property characteristics of flexibility, drape, tack, and toughness and the process for preparing and utilizing the same are disclosed. The novelty of this invention appears to reside in the composition and process of preparing addition type polyimides useful as structural adhesives as well as composite matrix materials and the process of preparing the same.

Stclair, T. L.↗

NASA NTRS1986

Investigation of the effects of short chain processing additives on polymers

The effects of low level concentrations of several short chain processing additives on the properties of the 4,4'-bis(3,4-dicarboxyphenoxy) diphenylsulfide dianhydride (BDSDA)/4,4'-diaminodiphenyl ether (ODA)/1,3'-diaminobenzene (m-phenylene diamine) (MPA) (422) copolyimide were investigated. It was noted that 5 percent MPD/phthalic anhydride (PA) is more effective than 5 percent ODA/PA and BDSDA/aniline (AN) in strengthening the host material. However, the introduction of 10 percent BDSDA/AN produces disproportionately high effects on free volume and free electron density in the host copolyimide.

Singh, J. J.↗

NASA NTRS1986

Process for preparing essentially colorless polyimide film containing phenoxy-linked diamines

A polyimide film that is approximately 90% transparent at 500 nm, useful for thermal protective coatings and solar cells, and the processes for preparing the same by thermal and chemical conversion are disclosed. An essential feature for achieving maximum optical transparency films requires utilizing recrystallized and/or sublimated specific aromatic diamines and dianhydride monomers and introducing phenoxy or thiophenyl separator groups and isomeric m,m' or o,p'-oriented diamines into the polymer molecular structure. The incorporation of these groups in the polymer structure serves to separate the chromaphoric centers and reduce the formation of inter-chain and intra-chain charge transfer complexes which normally cause absorptions in the UV-visible range. The films may be obtained by hand, brushing, casting, or spraying a layer of polyamic acid solutions onto a surface and thermally converting the applied layer to the polyimide, or the polyamic acid solution can be chemically converted to the polyimide, subsequentially dissolved in an organic solvent, and applied as a polyimide film layer with the solvent therein thermally removed.

Stclair, A. K.↗

NASA NTRS1985

Optically transparent/colorless polyimides

Several series of linear aromatic polyimide films have been synthesized and characterized with the objective of obtaining maximum optical transparency. Two approaches have been used as part of this structure-property relationship study. The first approach is to vary the molecular structure so as to separate chromophoric centers and reduce electronic interactions between polymer chains to lower the intensity of color in the resulting polymer films. A second and concurrent approach is to perform polymerizations with highly purified monomers. Glass transition temperatures of thermally cured polyimide films are obtained by thermomechanical analysis and thermal decomposition temperatures are determined by thermogravimetric analysis. Transmittance UV-visible spectra of the polyimide films are compared to that of a commercial polyimide film. Fully imidized films are tested for solubility in common organic solvents. The more transparent films prepared in this study are evaluated for use on second-surface mirror thermal control coating systems. Lightly colored to colorless films are characterized by UV-visible spectroscopy before and after exposure to 300 equivalent solar hours UV irradiation and varying doses of 1 MeV electron irradiation. The effects of monomer purity, casting solvent and cure atmosphere on polyimide film transparency are also investigated.

Stclair, A. K.↗

NASA NTRS1985

Process of end-capping a polyimide system

A process of endcapping a polyimide system with an endcapping agent in order to achieve a controlled decrease in molecular weight and melt viscosity along with predictable fracture resistance of the molded products is disclosed. The uncapped system is formed by combining an equimolar ratio of 4,4'-bis (3,4-dicarboxyphenoxy) diphenylsulfide dianhydride (BDSDA) and 1,-bis (aminophenoxy) benzene (APB) dissolved in bis (2-methoxyethyl)ether. The endcapped system is formed by dissolving APB in bis-(2-methoxyethyl)ether, adding the BDSDA. By varying the amount of endcapping from 0 to 4%, molecular weight is decreased from 13,900 to 8660. At a processing temperature of 250 C, there is a linear relationship between molecular weight and viscosity, with the viscosity decreasing by two orders of magnitude as the molecular weight decreased from 13,900 to 8660.

Stclair, T. L.↗

NASA NTRS1982

Positron lifetime studies in thermoplastic polyimide test specimens

Positron lifetime measurements were made in two thermoplastic polyimide materials recently developed at Langley. The long component lifetime values in polyimidesulfone samples are 847 + or - 81 Ps (dry) and 764 + or - 91 Ps (saturated). The corresponding values in LARC thermoplastic imides are 1080 + or - 139 Ps (dry) and 711 + or - 96 Ps (saturated). Clearly, the presence of moisture has greater effect on positron lifetime in LARC thermoplastic imides than in the case of polyimidesulfones. This result is consistent with the photomicrographic observations made on frozen water saturated specimens of these materials.

Singh, J. J.↗

NASA NTRS1978

Solventless LARC-160 Polyimide Matrix Resin

The addition polyimide, LARC-160, which was originally synthesized from low cost liquid monomers as a laminating resin in ethanol, was prepared as a solventless, high viscosity, neat liquid resin. The resin was processed by hot-melt coating techniques into graphite prepreg with excellent tack and drape. Comparable data on graphite reinforced laminates made from solvent-coated and various hot-melt coated prepreg were generated. LARC-160, because of its liquid nature, can be easily autoclave processed to produce low void laminates. Liquid chromatographic fingerprints indicate good reaction control on resin scale ups. Minor changes in monomer ratios were also made to improve the thermal aging performance of graphite laminates.

Stclair, T. L.↗

NASA NTRS1978

High Temperature Adhesives for Bonding Kapton

Experimental polyimide resins were developed and evaluated as potential high temperature adhesives for bonding Kapton polyimide film. Lap shear strengths of Kapton/Kapton bonds were obtained as a function of test temperature, adherend thickness, and long term aging at 575K (575 F) in vacuum. Glass transition temperatures of the polyimide/Kapton bondlines were monitored by thermomechanical analysis.

Stclair, A. K.↗

NASA NTRS1977

Polyimide adhesives

A process was developed for preparing aromatic polyamide acids for use as adhesives by reacting an aromatic dianhydride to an approximately equimolar amount of an aromatic diamine in a water or lower alkanol miscible ether solvent. The polyamide acids are converted to polyimides by heating to the temperature range of 200 - 300 C. The polyimides are thermally stable and insoluble in ethers and other organic solvents.

Progar, D. J.↗

NASA NTRS1977

A new polyimide laminatine resin

Addition polyimide for composite materials is based on liquid monomers and has significant advantages over most existing high-temperature resins. Essentially solventless prepreg has improved drape, tack.

Barrick, J. D. W.↗