Search NASA⌕ Search

Engineering topics

Stepanyan, Vahram

Publications and source records attributed to Stepanyan, Vahram.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

SAFE50 Reference Design Study for Large-Scale High-Density Low-Altitude UAS Operations in Urban Areas

Enabling safe, routine, and high-density flight operations of small UAS at low-altitude over heavily populated urban centers presents a difficult challenge for emerging UAS Traffic Management (UTM) system concepts. Urban operations by definition involve flight over people, property, and infrastructure. Low-altitude urban environments - such as urban canyons – are one of the most difficult areas for UTM to consider. Mission concepts require routine operations in a cluttered radio-frequency (RF) environment with degraded or denied Global Positioning System (GPS) reception. Flights with any appreciable distance will be beyond visual and communications line-of-sight from ground operators. Timely detection and response to emergencies and onboard failures, which is critical for safe aircraft operation, will be difficult. This work seeks to establish a feasible reference autonomy architecture for autonomous vehicles in an urban UTM system, then verifying and validating this architecture within a complete UTM concept point-design and systems analysis study. In this paper, we present the results from the NASA SAFE50 conceptual design and systems study that investigates the trade-space of urban UTM operations. This advanced conceptual design study develops a feasible, verified, validated point-design solution. The SAFE50 point-design concept places emphasis on advanced, highly-autonomous, and highly-capable vehicles that favors intelligent onboard autonomy over direct human control with today's technologies and operating in today's urban environments. This paper focuses on an general overview of the design study, highlighting decisions made in the architectural solution. This paper will presents a summary of the study, architectures, and requirements. We present an overview of the architecture designs as derived from the top-level UTM system. The point-design has been implemented in both simulation and through flight testing of hardware design prototypes. The results from simulation and flight testing as part of the verification and validation process of the reference design study.

Ippolito, Corey A.↗
NASA NTRS2019

Input Constrained M-MRAC for Multirotors Operating in an Urban Environment

The paper presents a modified model reference adaptive control (M-MRAC) for multi-input multi-output nonlinear dynamical systems with time varying parametric uncertainties and bounded external disturbances. It uses a prediction model to rapidly generate adaptive estimates of the system's uncertainties with adjustable errors that converge to a small neighborhood of the origin. A sufficient condition is derived to specify the region of attraction in the space of initialization errors, design parameters and external commends. The approach is applied to thrust controlled multi-rotor air vehicles operating in an urban environment. It is shown that the designed controller can provide a good tracking of a given trajectory in the unknown urban wind field, assuming that the maximum thrust generated by the rotors is known. The performance of the algorithms are demonstrated in simulations.

Stepanyan, Vahram↗
NASA NTRS2019

Coordinated Turn Trajectory Generation and Tracking Control for Multi-rotors Operating in Urban Environment

The paper presents an efficient trajectory generation and tracking approach for multi-rotor air vehicles operating in urban environment, which takes into account uncertainties in the urban wind field and in the vehicle's parameters. Generated trajectories are sufficiently smooth, based on the differential flatness of the vehicle's dynamics and optimal in the sense of minimum agility and time. They pass through given set of way points, guarantee flight without a side-slip, and satisfy vehicle's dynamics and actuator constraints. In addition, an algorithm is presented to compute the required power to traverse the generated trajectory. Presented algorithms are implementable in real time using on-board computers. They do not take into account the vehicle's existing flight controller, hence there is no guarantee that the controller will be able to provide acceptable tracking of the generated trajectory, especially in the presence of atmospheric disturbances. To this end, we propose an adaptive augmentation algorithm to improve vehicle's performance by taking into account the effects of disturbances and on-line estimates of vehicle's existing flight controller's gains. The algorithms have been verified by simulations using DJI S1000 octocopter's model.

Stepanyan, Vahram↗
NASA NTRS2019

Coordinated Turn Trajectory Generation and Tracking Control for Multi-Rotors Operating in Urban Environment

The paper presents an efficient trajectory generation and tracking approach for multi-rotor air vehicles operating in urban environment, which takes into account uncertainties in the urban wind field and in the vehicle's parameters. Generated trajectories are sufficiently smooth, based on the differential flatness of the vehicle's dynamics and optimal in the sense of minimum agility and time. They pass through given set of way points, guarantee flight without a side-slip, and satisfy vehicle's dynamics and actuators constraints. In addition, an algorithm is presented to compute the required power to traverse the generated trajectory. Presented algorithms are implementable in real time using on-board computers. They do not take into account the vehicle's existing flight controller, hence there is no guarantee that the controller will be able to provide acceptable tracking of the generated trajectory, especially in the presence of atmospheric disturbances. To this end, we propose an adaptive augmentation algorithm to improve vehicle's performance by taking into account the effects of disturbances and on-line estimates of vehicle's existing flight controller's gains. The algorithms have been verified by simulations using DJI S1000 octocopter's model.

Stepanyan, Vahram↗
NASA NTRS2019

Real-Time Path Planning for Multi-copters flying in UTM -TCL4

NASA's UAS Traffic management (UTM) -TCL-4 focuses on safely enabling large scale small UAS oper- ations in low altitude airspace in dense urban regions. This paper presents an operational architecture of an autonomous unmanned aerial vehicle operating in TCL4. An on-line path planning scheme is proposed which can effectively plan for feasible paths in real time with TCL-4 constraints. An end to end system is designed and tested in high fidelity Reflection architecture which demonstrates the feasibility of the approach.

Chakrabarty, Anjan↗
NASA NTRS2018

Piloted Simulator Evaluation Results of Flight Physics Based Stall Recovery Guidance

In recent studies, it has been observed that loss of control in flight is the most frequent primary cause of accidents. A significant share of accidents in this category can be remedied by upset prevention if possible, and by upset recovery if necessary, in this order of priorities. One of the most important upsets to be recovered from is stall. Recent accidents have shown that a correct stall recovery maneuver remains a big challenge in civil aviation, partly due to a lack of pilot training. A possible strategy to support the flight crew in this demanding context is calculating a recovery guidance signal, and showing this signal in an intuitive way on one of the cockpit displays, for example by means of the flight director. Different methods for calculating the recovery signal, one based on fast model predictive control and another using an energy based approach, have been evaluated in four relevant operational scenarios by experienced commercial as well as test pilots in the Vertical Motion Simulator at NASA Ames Research Center. Evaluation results show that this approach could be able to assist the pilots in executing a correct stall recovery maneuver.

Lombaerts, Thomas↗
NASA NTRS2017

Vertical Motion Simulator Experiment on Stall Recovery Guidance

A stall recovery guidance system was designed to help pilots improve their stall recovery performance when the current aircraft state may be unrecognized under various complicating operational factors. Candidate guidance algorithms were connected to the split-cue pitch and roll flight directors that are standard on large transport commercial aircraft. A new thrust guidance algorithm and cue was also developed to help pilots prevent the combination of excessive thrust and nose-up stabilizer trim. The overall system was designed to reinforce the current FAA recommended stall recovery procedure. A general transport aircraft model, similar to a Boeing 757, with an extended aerodynamic database for improved stall dynamics simulation fidelity was integrated into the Vertical Motion Simulator at NASA Ames Research Center. A detailed study of the guidance system was then conducted across four stall scenarios with 30 commercial and 10 research test pilots, and the results are reported.

Schuet, Stefan↗
NASA NTRS2017

Safe Autonomous Flight Environment (SAFE50) for the Notional Last 50 ft of Operation of 55 lb Class of UAS

The most difficult phase of small Unmanned Aerial System (sUAS) deployment is autonomous operations below the notional 50 ft in urban landscapes. Understanding the feasibility of safely flying sUAS autonomously below 50 ft is a game changer for many civilian applications. This paper outlines three areas of research currently underway which address key challenges for flight in the urban landscape. These are: (1) Off-line and On-board wind estimation and accommodation; (2) Real-time trajectory planning via characterization of obstacles using a LIDAR; (3) On-board information fusion for real-time decision-making and safe trajectory generation.

Autonomy↗
NASA NTRS2017

Estimation, Navigation and Control of Multi-Rotor Drones in an Urban Wind Field

The paper presents an on-board estimation, navigation and control architecture for multi-rotor drones flying in urban environment. It consists of adaptive algorithms to estimate vehicle's aerodynamic drag coefficients with respect to still air and the urban wind components along the flight trajectory, with guaranteed fast and reliable convergence to the true values; navigation algorithms to generate feasible trajectories between given way-points that take into account the estimated wind; and of control algorithms to track the generated trajectories as long as the vehicle retains sufficient number of functioning rotors capable of compensating for the estimated wind. All components of this on-board system are computationally effective and are intended for a real time implementation. The algorithms were tested in simulations.

Stepanyan, Vahram↗
NASA NTRS2017

Stall Recovery Guidance Using Fast Model Predictive Control

Based on a detailed analysis of recent loss-of-control events, the Aircraft State Awareness Joint Safety Analysis Team has identified the need to develop algorithms and display strategies to provide control guidance for recovery from approach-to-stall or stall. In order to be effective, such guidance should enhance the pilots ability to execute the Federal Aviation Administrations recommended stall recovery procedure. This paper explores the use of a fast model predictive control algorithm that determines near optimal recovery guidance, which quantifies the aircraft configuration and situation dependent recovery information required to maximize the effectiveness of the recovery. This information includes the magnitude of the initial pitch down maneuver, the specific amount of airspeed and thrust needed before pulling out of the recovery dive, as well as the maximum pitch-up rate that can be sustained without causing a secondary stall. The algorithm was integrated and tested with an in-house desktop simulator that implements the General Transport Aircraft model and the associated stall aircraft dynamics. Preliminary results are presented to demonstrate the use of the proposed approach as a recovery aid for pilots.

predictive control↗
NASA NTRS2016

Emerging Technologies for Airplane State Awareness and Prediction

Loss of control in flight (LOC-I) is consistently the leading cause of fatal aircraft accidents. A study of LOC accidents and incidents, commissioned by the Commercial Aviation Safety Team (CAST) identified a growing trend in loss of Airplane State Awareness (ASA) by the flight crew. This has led to recommended safety enhancements that include flight deck technologies with the potential of enhancing flight crew awareness of airplane energy state. The goal of this research is to develop and evaluate technologies that predict and assess the future aircraft energy state and auto-flight configuration, and provide appropriate alerting to anticipated problematic auto-flight inputs, with the aim of enhancing pilots situational awareness.

Aircraft Safety↗
NASA NTRS2016

Identification and Reconfigurable Control of Impaired Multi-Rotor Drones

The paper presents an algorithm for control and safe landing of impaired multi-rotor drones when one or more motors fail simultaneously or in any sequence. It includes three main components: an identification block, a reconfigurable control block, and a decisions making block. The identification block monitors each motor load characteristics and the current drawn, based on which the failures are detected. The control block generates the required total thrust and three axis torques for the altitude, horizontal position and/or orientation control of the drone based on the time scale separation and nonlinear dynamic inversion. The horizontal displacement is controlled by modulating the roll and pitch angles. The decision making algorithm maps the total thrust and three torques into the individual motor thrusts based on the information provided by the identification block. The drone continues the mission execution as long as the number of functioning motors provide controllability of it. Otherwise, the controller is switched to the safe mode, which gives up the yaw control, commands a safe landing spot and descent rate while maintaining the horizontal attitude.

Unmanned aerial system↗
NASA NTRS2016

Stall Recovery Guidance Algorithms Based on Constrained Control Approaches

Aircraft loss-of-control, in particular approach to stall or fully developed stall, is a major factor contributing to aircraft safety risks, which emphasizes the need to develop algorithms that are capable of assisting the pilots to identify the problem and providing guidance to recover the aircraft. In this paper we present several stall recovery guidance algorithms, which are implemented in the background without interfering with flight control system and altering the pilot's actions. They are using input and state constrained control methods to generate guidance signals, which are provided to the pilot in the form of visual cues. It is the pilot's decision to follow these signals. The algorithms are validated in the pilot-in-the loop medium fidelity simulation experiment.

Aircraft stall↗
NASA NTRS2015

M-MRAC Backstepping for Systems with Unknown Virtual Control Coefficients

The paper presents an over-parametrization free certainty equivalence state feedback backstepping adaptive control design method for systems of any relative degree with unmatched uncertainties and unknown virtual control coefficients. It uses a fast prediction model to estimate the unknown parameters, which is independent of the control design. It is shown that the system's input and output tracking errors can be systematically decreased by the proper choice of the design parameters. The benefits of the approach are demonstrated in numerical simulations.

Certainty equivalence control↗
NASA NTRS2015

M-MRAC for SPHERES

This paper presents application of the modified reference model MRAC (M-MRAC) method to control the relative position and orientation of a cluster of satellites known collectively as the Synchronized Position Hold, Engage, Reorient Experimental Satellites (SPHERES). The approach uses fast estimation algorithms to achieve guaranteed tracking of reference commands for both input and output signals in the presence of uncertainties in mass and inertia data and external disturbances. The tracking errors can be systematically decreased by the proper selection of the design parameters in the identification model. The generated control signals have acceptable magnitudes and exhibit no oscillations. The benefits of the method are demonstrated in numerical simulations.

Relative motion↗
NASA NTRS2014

M-MRAC With Normalization

This paper presents a normalization based modified reference model adaptive control method for multi-input multi-output (MIMO) uncertain systems in the presence of bounded external disturbances. It has been shown that desired tracking performance can be achieved for the system's output and input signals with the proper choice of design parameters. The resulting adaptive control signal satisfies a second order linear time invariant (LTI) system, which is the effect of the normalization term in the adaptive laws. This LTI system provides the guideline for the design parameter selection. The theoretical findings are confirmed via a simulation example.

Stepanyan, Vahram↗
NASA NTRS2014

Initial Evaluations of LoC Prediction Algorithms Using the NASA Vertical Motion Simulator

Flying near the edge of the safe operating envelope is an inherently unsafe proposition. Edge of the envelope here implies that small changes or disturbances in system state or system dynamics can take the system out of the safe envelope in a short time and could result in loss-of-control events. This study evaluated approaches to predicting loss-of-control safety margins as the aircraft gets closer to the edge of the safe operating envelope. The goal of the approach is to provide the pilot aural, visual, and tactile cues focused on maintaining the pilot's control action within predicted loss-of-control boundaries. Our predictive architecture combines quantitative loss-of-control boundaries, an adaptive prediction method to estimate in real-time Markov model parameters and associated stability margins, and a real-time data-based predictive control margins estimation algorithm. The combined architecture is applied to a nonlinear transport class aircraft. Evaluations of various feedback cues using both test and commercial pilots in the NASA Ames Vertical Motion-base Simulator (VMS) were conducted in the summer of 2013. The paper presents results of this evaluation focused on effectiveness of these approaches and the cues in preventing the pilots from entering a loss-of-control event.

Pilot Cue↗