Search NASA⌕ Search

Engineering topics

Stephen Woodruff

Publications and source records attributed to Stephen Woodruff.

WMLES of Boundary-Layer Transition

The potential for the accurate prediction of laminar-turbulent transition by Wall-Modeled Large-Eddy Simulation (WMLES) is investigated through analysis of Direct Numerical Simulation (DNS) and WMLES results. The analysis indicates satisfactory prediction of transition by WMLES is possible, provided a) a sufficiently accurate wall model for the initial stage of transition is employed, b) a satisfactory transition is made between this initial-stage wall model and the wall model for the downstream fully-developed turbulence, and c) limitations on temporal and spatial resolution, and on the thickness of the wall-modeled region, imposed by the need to accurately resolve the disturbance waves and the transition region are observed. This is illustrated with a WMLES computation that yields reasonable agreement with DNS results; however, the wall-modeled region thickness, and thus the cost savings, is less than is typical for WMLES of fully developed turbulence.

wall-modeled large-eddy simulation, boundary-layer↗

WMLES of Boundary-Layer Transition

An analysis of the potential for the accurate prediction of laminar-turbulent transition by Wall-Modeled Large-Eddy Simulation (WMLES) indicates that satisfactory prediction of transition by WMLES is possible, provided a) a sufficiently accurate wall model for the initial stage of transition is employed, b) a satisfactory transition is made between this initial-stage wall model and the wall model for the downstream fully-developed turbulence, and c) limitations on temporal and spatial resolution, and on the thickness of the wall-modeled region, imposed by the need to accurately resolve the disturbance waves and the transition region are observed. This is illustrated with WMLES computations of subharmonic transition in a flat-plate boundary layer that yield reasonable agreement with DNS results. However, the wall-modeled region thickness, and thus the cost savings, is less than is typical for WMLES of fully developed turbulence.

wall-modeled large-eddy simulation↗

WMLES of K-Type and Bypass Boundary-Layer Transition

A new wall model for transitional flows is applied to the wall-modeled large-eddy simulation of the Klebanoff (fundamental) and bypass transition mechanisms, continuing an effort to improve computational efficiency by mitigating resolution requirements for the disturbances upstream of transition. Comparison with direct-numerical simulation results shows good agreement in the region prior to transition, but agreement during and after transition is not as good as previous wall-modeled large-eddy simulations of the Herbert (subharmonic) transition mechanism using this wall model. This is apparently due to weaknesses in the modelling of the transition process itself.

wall-modeled large-eddy simulation↗

WMLES of K-Type and Bypass Boundary-Layer Transition

A new wall model for transitional flows is applied to the wall-modeled large-eddy simulation of the Klebanoff (fundamental) and bypass transition mechanisms, continuing an effort to improve computational efficiency by mitigating resolution requirements for the disturbances upstream of transition. Comparison with direct-numerical simulation results shows good agreement in the region prior to transition, but agreement during and after transition is not as good as previous wall-modeled large-eddy simulations of the Herbert (subharmonic) transition mechanism using this wall model. This is apparently due to weaknesses in the modelling of the transition process itself.

wall-modeled large-eddy simulation↗