Sternfeld, H. | Search NASA

NASA NTRS1995

Evaluation of the impact of noise metrics on tiltrotor aircraft design

A subjective noise evaluation was conducted in which the test participants evaluated the annoyance of simulated sounds representative of future civil tiltrotor aircraft. The subjective responses were correlated with the noise metrics of A-weighted sound pressure level, overall sound pressure level, and perceived level. The results indicated that correlation between subjective response and A-weighted sound pressure level is considerably enhanced by combining it in a multiple regression with overall sound pressure level. As a single metric, perceived level correlated better than A-weighted sound pressure level due to greater emphasis on low frequency noise components. This latter finding was especially true for indoor noise where the mid and high frequency noise components are attenuated by typical building structure. Using the results of the subjective noise evaluation, the impact on tiltrotor aircraft design was also evaluated. While A-weighted sound pressure level can be reduced by reduction in tip speed, an increase in number of rotor blades is required to achieve significant reduction of low frequency noise as measured by overall sound pressure level. Additional research, however, is required to achieve comparable reductions in impulsive noise due to blade-vortex interaction, and also to achieve reduction in broad band noise.

Sternfeld, H.↗

NASA NTRS1982

Role of empirical methods

There are different levels of helicopter noise prediction which may be appropriate at various stages in the design process. In the early preliminary design stages, when available information is usually limited to parameters such as gross weight, tip speed, forward speed, rotor radius, and possibly number of blades, one is limited to purely empirically based methodology. As the design progresses, and airfoil blade planforms and twists are defined, predictions of airloads, vortex paths, and compressibility effects may permit application of more analytically based sound pressure level prediction methods. At the present stage of development of first principle prediction methodology, however, the designer may still find it necessary to supplement such analyses with modifications based on empirical experience. Various causes and parameters of helicopter noise were identified and discussed from the standpoint of prediction. Rotational noise, blade-vortex interaction noise, thickness noise, broadband noise, and flyover noise were considered. A modular computer program for helicopter noise prediction (HELNOP) was described briefly. Wind tunnel models as useful tools in predicting full scale helicopter noise were also discussed.

Sternfeld, H.↗