Trajectory Optimization for the Virtual Telescope for X-Ray Observations
The Virtual Telescope for X-Ray Observations (VTXO) is a long focal length telescope which promises to provide orders of magnitude improvement in angular resolution in the X-ray band. VTXO will include a Phased Fresnel Lens (PFL), which provides nearly diffraction-limited imaging, with a 1 km focal length. The PFL is carried by the Optics Spacecraft, which flies in a formation with the Detector Spacecraft, approximating a rigid telescope body. In order to maintain the formation requirements, while pointing the telescope axis at the desired astronomical targets, one spacecraft will be traveling on a non-natural trajectory, requiring the vehicle to maneuver regularly to maintain the telescope pointing. If care is not taken in the trajectory design, these paths result in large propellant consumption. However, there is an opportunity to optimize trajectories when re-arranging the formation between different astronomical targets. This paper presents an optimization scheme for re-pointing the telescope, utilizing a non-traditional path-based cost function to solve the propellant optimal trajectory. The resulting trajectories show a factor of four improvement in propellant consumption compared to the baseline. The optimization techniques developed for VTXO are applicable to orbits ranging from low-Earth orbit, to highly eccentric Earth orbits, and Lagrange point orbits.