Search NASA⌕ Search

Engineering topics

Stewart, James

Publications and source records attributed to Stewart, James.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗
DOE OSTI2024

Detection and Quantitation of Hydrogen Emissions Role and Status of Detection Technology

Hydrogen is a critical strategy to decarbonize energy and manufacturing industries. Hydrogen is nontoxic and can be handled safely, but potential for secondary greenhouse impacts. Hydrogen releases arise from a variety of mechanisms (process, design features, "leaks") that contribute to total hydrogen releases. Detection methodologies will be critical to detect and quantify hydrogen emissions. Detection is to be integrated with advanced analytics (AI) and behavior modelling to effectively identify, quantify, and source locate hydrogen releases. Modelling of emissions will contribute to facility safety and reliability. DOE is committed to develop the tools to model and mitigate the impact of hydrogen releases which include: Support modeling to elucidate released hydrogen degradation; Support the development of tools for emissions quantitation; and Support engineering advancements to minimize hydrogen losses along the value chain (including process, design features, and leaks).

detection↗
DOE OSTI2024

NREL Hydrogen Sensor Testing Laboratory

Relevance: Detection is recognized as a critical element for hydrogen facility safety design and supports risk mitigation. Detection methodologies will support validation of H2 behavior research. Hydrogen point sensors play a critical role for safety and process monitoring, but other methodologies can be developed. Approach: NREL Sensor Laboratory tests and verifies sensor performance for manufacturers, developers, end-users, regulatory agencies and SDOs/CDOs NREL deployment activity supports regulatory requirement verification, hydrogen behavior models, and method development for use by stakeholders. Accomplishments and Progress: NREL's R&D accomplishments have supported developers, industry, and SDOs by providing sensor performance and deployment expertise not otherwise available. Development of alternative detection strategies for hydrogen applications have been initiated. HyWAM and advanced detection methodologies deployments at H2@Scale Facilities are being implemented. Collaborations: Collaboration with government laboratories, universities, private organizations and regulatory agencies has leveraged the NREL Sensor Laboratory's success in advancing hydrogen safety sensors and process control. Proposed Future Work: NREL will support hydrogen deployment by the proper implementation of hydrogen sensors and advanced detection strategies. NREL will continue to support science-based codes and standards. This effort will be guided by the needs of the hydrogen community.

codes and standards↗
DOE OSTI2023

MEMPHIS (Mesoscle Multiphysics Phase Field Simulator v.0

SAND2024-01427O Mesoscale Multiphysics Phase Field Simulator (MEMPHIS) is used for solving interfacial problems and can be applied to many evolutionary problems. Some examples are solidification dynamics, viscous fingering, fracture mechanics, hydrogen embrittlement, vesicle dynamics, electro-mechanical degradation of batteries, aging of microstructures, and segregation. MEMPHIS is written in Fortran 90 in a modular fashion, where model and numerical solvers are decoupled from one another. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Dingreville, Remi↗
DOE OSTI2021

Modeling impurity concentrations in liquid argon detectors

Impurities in noble liquid detectors used for neutrino and dark matter experiments can significantly impact the quality of data. We present an experimentally verified model for describing the dynamics of impurity distributions in liquid argon (LAr) detectors. The model considers sources, sinks, and transport of impurities within and between the gas and liquid argon phases. Measurements of oxygen concentrations in a 20-L LAr multi-purpose test stand are compared to calculations made with this model to show that an accurate description of the concentrations under various operational conditions can be obtained. A result of this analysis is a determination of Henry’s coefficient for oxygen in LAr. Additionally, these calculations also show that some processes have small effects on the impurity dynamics and excluding them yields a solution as a sum of two exponential terms. This solution provides a simple way to extract Henry’s coefficient with negligible approximation error. It is applied to the data and the Henry’s coefficient for oxygen in LAr is obtained as 0.84 +0.09 -0.05 , consistent with literature results. Finally, based on the analysis of the data with the model, we further suggest that, for a large liquid argon detector, barriers to flow (“baffles”) installed in the gas phase to restrict flow can help reduce the ultimate impurity concentration in the LAr.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Quantitating Interfraction Target Dynamics During Concurrent Chemoradiation for Glioblastoma: A Prospective Serial Imaging Study

Magnetic resonance image (MRI) guided radiation therapy has the potential to improve outcomes for glioblastoma by adapting to tumor changes during radiation therapy. This study quantifies interfraction dynamics (tumor size, position, and geometry) based on sequential magnetic resonance imaging scans obtained during standard 6-week chemoradiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Chapter 17: Residential Behavior Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures, September 2011 - August 2020

This document has been updated in August 2020. This document was developed for the U.S. Department of Energy Uniform Methods Project (UMP). The UMP provides model protocols for determining energy and demand savings that result from specific energy-efficiency measures implemented through state and utility programs. In most cases, the measure protocols are based on a particular option identified by the International Performance Verification and Measurement Protocol; however, this work provides a more detailed approach to implementing that option. Each chapter is written by technical experts in collaboration with their peers, reviewed by industry experts, and subject to public review and comment. The protocols are updated on an as-needed basis. The UMP protocols can be used by utilities, program administrators, public utility commissions,evaluators, and other stakeholders for both program planning and evaluation. To learn more about the UMP, visit the website, https://energy.gov/eere/about-us/ump-home, or download the UMP introduction document at http://www.nrel.gov/docs/fy17osti/68557.pdf.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Coupled Experiment and Theory to Explore the Limits of Material Strength at High Strain Rates

Critical components such as detonators in Sandia's stockpile are heterogeneous materials that rely on accurate constitutive models for each material used in the component. However, experiments to study materials at high pressure are challenging and time consumptive, therefore we turn to modeling tools to refine and predict outcomes beforehand. Efficient models balance absolute physical accuracy against approximate but computationally lightweight constitutive inputs. By using a relatively small number of high fidelity simulations and experiments we have be able to broaden the predictive power of the shock response in metals and polymers. We have tailored the analysis of these simulations to determine a size dependent material strength, which can be used as constitutive model inputs for continuum hydrodynamics codes. For the shocked Cu, MD simulations show a yield strength from RMI jet growth of approximately 450MPa that depends on the details of the free surface geometry. This value is close to the yield strength of 500MPa parameterized for an elastic-perfectly-plastic strength model from experiments at the Dynamic Compression Sector at Argonne National Lab. The same analysis applied to MD simulations of PMMA jetting resulted in no clear determination of yield strength, implying a more complex RMI process in polymeric materials. Atomistic simulations of both materials are shown to be valuable training metrics and show the need for explicit strain rate dependent strength for future improvements in strength models used in continuum codes.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Dakota Technical Support Demonstrations and Software Improvements

Caterpillar, Inc. (Caterpillar) and Sandia National Laboratories (SNL) continued their partnership to improve SNL's open source Dakota software product and effectively deploy it to Caterpillar engineering design and analysis problems. Several new features that are expected to benefit not only Caterpillar but also the entire Dakota user community were introduced. In addition, SNL and Caterpillar cooperated extensively to conduct a demonstration of Dakota's uncertainty quantification capabilities on a computational simulation of relevance to Caterpillar.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Chapter 24: Strategic Energy Management (SEM) Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Strategic energy management (SEM) focuses on achieving energy-efficiency improvements through systematic and planned changes in facility operations, maintenance, and behaviors (OM&B) and capital equipment upgrades in large energy-using facilities, including industrial buildings, commercial buildings, and multi-facility organizations such as campuses or communities. Facilities can institute a spectrum of SEM actions, ranging from a simple process for regularly identifying energy-savings actions, to establishing a formal, third-party recognized or certified SEM framework for continuous improvement of energy performance. In general, SEM programs that would be considered part of a utility program will contain a set of energy-reducing goals, principles, and practices emphasizing continuous improvements in energy performance or savings through energy management and an energy management system (EnMS).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Measurement of longitudinal electron diffusion in liquid argon

In this paper, we report the measurement of longitudinal electron diffusion coefficients in liquid argon for electric fields between 100 and 2000 V/cm with a gold photocathode as a bright electron source. The measurement principle, apparatus, and data analysis are described. In the region between 100 and 350 V/cm, our results show a discrepancy with the previous measurement. In the region between 350 and 2000 V/cm, our results represent the world's best measurement. Over the entire measured electric field range, our results are systematically higher than the calculation of Atrazhev-Timoshkin. The quantum efficiency of the gold photocathode, the drift velocity and longitudinal diffusion coefficients in gas argon are also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗