Search NASA⌕ Search

Engineering topics

Stimpson, Shane G.

Publications and source records attributed to Stimpson, Shane G..

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multilevel-in-Space-and-Energy CMFD in VERA

For full-core modeling in the Virtual Environment for Reactor Analysis (VERA), the three-dimensional multigroup eigenvalue neutron transport problem is solved by MPACT. To improve the efficiency of MPACT, advancements have been made in the transport accelerator. Multilevel-in-energy and multilevel-in-space coarse mesh finite difference (CMFD) solvers were developed to improve the efficiency of the CMFD accelerator. In this paper a new multilevel-in-space-and-energy CMFD solver is developed with coarsening in both space and energy on every level. Several different strategies are investigated for coarsening groups in energy. Modified V-cycle and multiple-cycle algorithms are evaluated for solving the multilevel equations. The performance of these solvers is compared for typical full-core reactor physics problems.

42 ENGINEERING↗
DOE OSTI2021

Extended Applications of Subgrid Representation in the 2D/1D Method

Recent efforts in MPACT have focused on improving the performance of the 2D/1D subplane implementation to help target computational performance goals. Here, we build on previous efforts that targeted the use of subgrid treatments to improve the accuracy of control rod representation, presenting three additional applications of subgrid treatments with the goal of reducing the computational burden of simulations. These subgrid applications include treatment of spacer grids, thermal feedback, and axial reflector material representation. With these approaches, a single method of characteristics (MOC) plane can contain several different materials axially that are represented explicitly via subgrids on the coarse mesh finite difference (CMFD) mesh but are axially homogenized on the MOC mesh. This allows for a substantial reduction in the number of MOC planes needed in the calculation through the introduction of an approximate treatment, particularly with regard to the self-shielded cross sections and MOC-informed radial current coupling coefficients in CMFD. Several test problems ranging from single rod to quarter core are used to assess the solution accuracy and performance of these various subgrid representations. Overall, the accuracy of the approximations seems very reasonable, with extremely small differences in eigenvalue observed and maximum pin power errors in the 0.5% to 1.0% range. Several cases show substantial value in the compromise between accuracy and computational performance. Others highlight the new computational hurdles that future research will aim to resolve.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Coupling MOOSE-Wrapped MPACT to BISON

As part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an effort is being made to leverage codes like Virtual Environment for Reactor Analysis (VERA) and Michigan Parallel Characteristics Transport (MPACT) by coupling them with other NEAMS codes. To facilitate coupling with other Multiphysics Objected Oriented Simulation Environment (MOOSE) applications, a MOOSE-wrapped MPACT app is created. The capability of this app, named Trogdor, is demonstrated by coupling it with another MOOSE app, BISON. Several single pin problems were run to test the Trogdor and BISON coupling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Impact of Radial Reflector Fidelity on Neutronics and Vessel Fluence Simulations

The Consortium for Advanced Simulation of Light Water Reactors is developing the Virtual Environment for Reactor Applications (VERA), and the MPACT code, which is the primary deterministic neutron transport solver in VERA, provides sub-pin level flux and power distributions as part of full-scale cycle depletion and analysis. In such calculations, an important aspect is the radial reflector treatment. To improve the fidelity of the radial reflector treatment, MPACT was extended to approximate the modeling of the reactor’s structural components such as the core shroud, barrel, neutron pads, and vessel. This work explores several modeling configurations with varying levels of fidelity and computational burden and assesses the importance of modeling fidelity on the eigenvalue and pin power distribution. Two two-dimensional (2-D) problems were analyzed to assess the impact on eigenvalue and pin power distributions with low-fidelity, coarse square cell reflector representations: (1) a Watts Bar Nuclear Plant Unit 1 (WBN1) quarter-core slice with depletion and (2) an AP1000 quarter-core slice. In this work, the analyses showed that the effect on eigenvalue is fairly small, but the effect on pin power is more pronounced, especially locally in the assemblies closest to the periphery, where the maximum pin power difference is nearly 3.5% in the AP1000 case. Two additional 2-D problems were used to assess the comparison between the low-fidelity coarse square cell treatment and a high-fidelity geometric representation that uses subpin material specification: (1) the same WBN1 quarter-core slice and (2) a representative model of the NuScale small modular reactor (SMR), which features a solid reflector design with moderator holes. These results demonstrate that even a coarse, low-fidelity representation adequately captures the necessary simulation characteristics. Last, these capabilities were applied to the 2-D WBN1 quarter-core depletion to assess the impact on vessel fluence using VeraShift. From adjoint calculations, pins along the periphery were observed to be of highest importance for fluence calculation, so the impact of the reflector representation in MPACT could theoretically substantially affect the predicted result. However, it was observed that the change in pin powers along the periphery minimally impacts the maximum vessel fluence with a difference within the statistical uncertainty but provides terrific insight on the sensitivity of the peripheral pins.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Simulation of the BEAVRS benchmark using VERA

The Virtual Environment for Reactor Applications (VERA) is being developed by the Consortium for the Advanced Simulation of Light Water Reactors (CASL). Here, VERA is used to perform the Benchmark for Evaluation and Validation of Reactor Simulations (BEAVRS), which provides two cycles’ worth of operating power history, along with a full, detailed description of the geometry, and measured data. Cycle 1 and 2 are simulated with VERA and the results are compared to the measured zero power physics tests, critical boron concentration, and flux maps.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗