Search NASA⌕ Search

Engineering topics

Stone, J. R.

Publications and source records attributed to Stone, J. R..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Forced-flow once-through boilers

A compilation and review of NASA-sponsored research on boilers for use in spacecraft electrical power generation systems is presented. Emphasis is on the heat-transfer and fluid-flow problems. In addition to space applications, much of the boiler technology is applicable to terrestrial and marine uses such as vehicular power, electrical power generation, vapor generation, and heating and cooling. Related research areas are discussed such as condensation, cavitation, line and boiler dynamics, the SNAP-8 project (Mercury-Rankine cycle), and conventional terrestrial boilers (either supercritical or gravity-assisted liquid-vapor separation types). The research effort was directed at developing the technology for once-through compact boilers with high heat fluxes to generate dry vapor stably, without utilizing gravity for phase separations. A background section that discusses, tutorially, the complex aspects of the boiling process is presented. Discussions of tests on alkali metals are interspersed with those on water and other fluids on a phenomenological basis.

Stone, J. R.↗
NASA NTRS1975

On the effects of flight on jet engine exhaust noise

Differences between flight data and predictions of jet engine exhaust noise were reconciled by considering the combined effects of jet mixing noise and internally generated engine exhaust noise. The source strength of the internally generated noise was assumed to be unaffected by flight, as experiments demonstrated. The directivity of the internally generated noise was assumed to be the same statically as that given in the NASA interim prediction method for core engine noise. However, it was assumed that in flight internally generated noise is subject to the convective amplification effect of a simple source. The absolute levels of internally generated noise were obtained from an empirical fit of some typical engine data. The static and flight jet noise were predicted using the above prediction method. It was shown that in many cases much of the flyover noise signature is dominated by internally generated noise.

Stone, J. R.↗
NASA NTRS1974

Noise of model target type thrust reversers for engine-over-the-wing applications

The present work reports on experiments concerning the noise generated by V-gutter and semicylindrical target reversers with circular and short-aspect-ratio slot nozzles having equivalent diameters of about 5 cm. At subsonic jet velocities of interest for engine-over-the-wing (OTW) powered-lift aircraft, the reversers were noisier than the nozzles alone and had a more uniform directional distribution and more high-frequency noise. Reverser shape was more important than nozzle shape in determining the reverser noise characteristics. An estimate is made of perceived noise level along the 152-m sideline for a hypothetical OTW powered-lift airplane.

Stone, J. R.↗
NASA NTRS1974

Results from cascade thrust reverser noise and suppression experiments

Results from experimental work on model scale cascade reversers with cold airflow are presented. Sound power level directivity and spectral characteristics for cascade reversers are reported. Effect of cascade exit area ratio, vane profile shape, and emission arc are discussed. Model equivalent diameters varied from 3 to 5 inches, pressure ratios range from 1.15 to 3.0. Depending on the reverser type, acoustic power was proportional to the 4 1/2 to 6th power of ideal jet velocity. Reverser noise peaked at higher frequency and was more omnidirectional than nozzle-alone jet noise. Appreciable reduction in sideline noise was obtained from plane shields. Airfoil-vaned cascades were the most aerodynamically efficient and least noisy reversers. Scaling of cascade reverser data to example aircraft engines showed all cascades above the 95 PNdB sideline goal from STOL aircraft. However, the airfoil-vaned reverser has a good potential for meeting this goal for high-bypass (low pressure ratio) exhausts.

Gutierrez, O. A.↗
NASA NTRS1974

Interim prediction method for jet noise

A method is provided for predicting jet noise for a wide range of nozzle geometries and operating conditions of interest for aircraft engines. Jet noise theory, data and existing prediction methods was reviewed, and based on this information a interim method of jet noise prediction is proposed. Problem areas are idenified where further research is needed to improve the prediction method. This method predicts only the noise generated by the exhaust jets mixing with the surrounding air and does not include other noises emanating from the engine exhaust, such as combustion and machinery noise generated inside the engine (i.e., core noise). It does, however, include thrust reverser noise. Prediction relations are provided for conical nozzles, plug nozzles, coaxial nozzles and slot nozzles.

Stone, J. R.↗
NASA NTRS1974

Results from cascade thrust reverser noise and suppression experiments

Results from experimental work on model scale cascade reversers with cold airflow are presented. Sound power levels, directivity, and spectral characteristics for cascade reversers are reported. Effect of cascade exit area ratio, vane profile shape, and emission arc are discussed. Model equivalent diameters varied from 3 to 5 inches; pressure ratios ranged from 1.15 to 3.0. Depending on the reverser type, acoustic power was proportional to the 4.5- to 6-th power of ideal jet velocity. Reverser noise peaked at higher frequency and was more omnidirectional than nozzle-alone jet noise. Appreciable reduction in sideline noise was obtained from plane shields.

Gutierrez, O. A.↗
NASA NTRS1974

Noise of model target type thrust reversers for engine-over-the-wing applications

The results of experiments on the noise generated by V-gutter and semicylindrical target reversers with circular and short-aspect-ratio slot nozzles having diameters of about 5 cm are presented. The experiments were conducted with cold-flow jets at velocities from 190-290 m/sec. The reversers at subsonic jet velocities had a more uniform noise distribution and higher frequency than the nozzles alone. The reverser shape was shown to be more important than the nozzle shape in determining the noise characteristics. The maximum sideline pressure level varied with the sixth power of the jet velocity, and the data were correlated for angles along the sideline. An estimate of the noise level along the 152 m sideline for an engine-over-the-wing powered-lift airplane was made.

Stone, J. R.↗
NASA NTRS1973

Noise tests of a high-aspect-ratio slot nozzle with various V-gutter target thrust reversers

The results of experiments on the noise generated by a 1.33 x 91.4 cm slot nozzle with various V-gutter reversers are presented. The experiments were conducted with near-ambient temperature jets at nozzle pressure ratios of 1.25 to 3.0, yielding jet velocities of about 190 to 400 m/sec. At pressure ratios of 2 or less, the reversers, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high-frequency noise. At pressure ratios above 2, the nozzle alone generated enough shock noise that the levels were about the same as for the reversers. The maximum overall sound pressure level and the effective overall sound power level both varied with the sixth power of jet velocity over the range tested.

Stone, J. R.↗
NASA NTRS1973

Small-scale noise tests of a slot nozzle with V-gutter target thrust reverser

The noise generated by a 2.26- by 11.43-cm slot nozzle with a V-gutter reverser, as well as some aerodynamic data on flow, thrust-reversal efficiency, and nozzle jet velocity decay were studied. The experimental data are scaled up to sizes suitable for reversing the wing flow of a 45/400-kg augmentor-wing-type STOL airplane, yielding perceived noise levels well above the 95-PNdb design goal on the 152-m sideline. The reverser, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high frequency noise. The maximum overall sound pressure level and the effective sound power level both varied with the sixth power of nozzle jet velocity. Preliminary experiments indicated possible sideline noise reduction by shielding.

Stone, J. R.↗
NASA NTRS1973

Noise tests of a high-aspect-ratio slot nozzle with various V-gutter target thrust reversers

The results of experiments on the noise generated by a 1.33- by 91.4 cm slot nozzle with various V-gutter reversers, and some thrust measurements are presented. The experiments were conducted with near-ambient temperature jets at nozzle pressure ratios of 1.25 to 3.0, yielding jet velocities of about 190 to 400 m/sec. At pressure ratios of 2 or less, the reversers, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high-frequency noise. At pressure ratios above 2, the nozzle alone generated enough shock noise that the levels were about the same as for the reversers. The maximum overall sound pressure level and the effective overall sound power level both varied with the sixth power of jet velocity over the range tested. The data were scaled up to a size suitable for reversing the wing-flap slot nozzle flow of a 45 400-kg augmentor-wing-type airplane on the ground, yielding perceived noise levels well above 95 PNdB on a 152-m sideline.

Stone, J. R.↗
NASA NTRS1973

Paper pilot ponders supersonic transports

The application is described of the digital program Pitch Paper Pilot to a presimulation analysis of a large delta wing aircraft similar to the Concorde supersonic transport. Pilot acceptance (in terms of Cooper-Harper ratings), pilot model parameters, and pilot-vehicle performance were predicted by Paper Pilot and compared to actual inflight measures. Results are good and illustrate the value of using the Paper Pilot concept during the planning stages of simulation.

Stone, J. R.↗
NASA NTRS1972

Noise generated by STOL core-jet thrust reversers.

This paper summarizes the results of an experimental investigation on the noise generated by target-type thrust reversers. The experimental data are normalized and scaled up to sizes suitable for reversing the core jets of a 45,400-kg augmentor-wing-type STOL airplane. The scaling calculatings yield perceived noise levels well above the 95-PNdB design goal for both sideline and flyover at 152.5 m. V-gutter and semicylindrical reversers were tested with a 5.24-cm-diameter circular nozzle, and a semicylindrical reverser was also tested with a 7.78-cm-diameter circular nozzle. Other test variables were the spacing between nozzle and reverser, reverser orientation, and nozzle pressure ratio. The thrust reversers, in addition to being noisier than the nozzle alone, also had a more uniform directivity.

Stone, J. R.↗
NASA NTRS1972

Preliminary experiments on the noise generated by target-type thrust reverser models

Experiments are reported on the noise generated by model V-gutter and semicylindrical target-type reversers with circular nozzles. Nozzles were 5.24 and 7.78 cm in diameter. Nozzle pressure ratio ranged from 1.25 to 1.72. The spacing between reversers and nozzle, as well as the reverser orientation, was also varied. More noise was generated with reversers than with the nozzle alone. The measured maximum overall sound pressure level varied with the sixth power of the nozzle exit velocity. Noise levels were more uniform in regard to directivity with reversers than with the nozzle alone. It is concluded that thrust reversers, can be a significant noise problem, especially for STOL aircraft using thrust reversers during approach.

Gutierrez, O. A.↗
NASA NTRS1972

Noise generated by STOL core-jet thrust reversers

An experimental investigation on the noise generated by target-type thrust reversers is discussed. The experimental data are normalized and scaled up to sizes suitable for reversing the core jets of a 100,000 lb augmentor-wing-type STOL airplane. The scaling calculations yield perceived noise levels well above the 95-PNdB design goal for both sideline and flyover at 500 ft. V-gutter and semicylindrical reversers were tested with a 5.24-cm-diameter circular nozzle, and a semicylindrical reverser was also tested with a 7.78-cm-diameter circular nozzle. The thrust reversers, in addition to being noisier than the nozzle alone, also had a more uniform directivity. The maximum overall sound pressure level and the effective sound power level both varied with sixth power of the nozzle jet velocity.

Stone, J. R.↗