Search NASA⌕ Search

Engineering topics

Stone, Kevin H.

Publications and source records attributed to Stone, Kevin H..

28 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Growth-Controlled Broad Emission in Phase-Pure Two-Dimensional Hybrid Perovskite Films

Two-dimensional hybrid metal halide perovskites (2D perovskites) are attractive for light-emitting devices and other applications because their emission is tunable across the visible spectrum. The emission profile of 2D perovskites can be broadened via a variety of mechanisms and is further complicated by the presence of impurities. Here, the challenge of making phase-pure films in Ruddlesden–Popper phases [(A') 2 (A) n–1 B n X 3n+1 structure] is overcome by using a single A/A'-site cation, ethylammonium (EA), whose optimal size also prohibits the formation of off-target phases. In the (EA) 2 (EA) n–1 Pb n Br 3n+1 family, the low-energy, broad emission observed in bulk crystals is reduced in spin-cast, polycrystalline films. This decrease in broad emission, attributed to phonon-mediated processes, is correlated with the strain in polycrystalline films that is observed by X-ray scattering. Photothermal deflection spectroscopy shows that strain also increases the electronic disorder near the free exciton absorbance. Broad emission in films can be recovered by slowing growth kinetics, which removes the strain acquired from spin-casting and increases the domain size. Furthermore, these results help extend the utility of 2D perovskites by suggesting design rules for the growth of thin films with the targeted phase and emission.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Persistent and partially mobile oxygen vacancies in Li-rich layered oxides

Increasing the energy density of layered oxide battery electrodes is challenging as accessing high states of delithiation often triggers voltage degradation and oxygen release. Here we utilize transmission-based X-ray absorption spectromicroscopy and ptychography on mechanically cross-sectioned Li 1.18–x Ni 0.21 Mn 0.53 Co 0.08 O 2–δ electrodes to quantitatively profile the oxygen deficiency over cycling at the nanoscale. The oxygen deficiency penetrates into the bulk of individual primary particles (~200 nm) and is well-described by oxygen vacancy diffusion. Using an array of characterization techniques, we demonstrate that, surprisingly, bulk oxygen vacancies that persist within the native layered phase are indeed responsible for the observed spectroscopic changes. We additionally show that the arrangement of primary particles within secondary particles (~5 μm) causes considerable heterogeneity in the extent of oxygen release between primary particles. Finally, our work merges an ensemble of length-spanning characterization methods and informs promising approaches to mitigate the deleterious effects of oxygen release in lithium-ion battery electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Probing Molecular Assembly of Small Organic Molecules during Meniscus-Guided Coating Using Experimental and Molecular Dynamics Approaches

Evaporation-based thin-film coating processes are ubiquitous in fields such as organic electronics, dye coatings, and the pharmaceutical industry. Based on experimental observations of enhanced thin-film alignment during meniscus-guided coating (MGC), a molecular dynamics simulation was developed to describe the thin-film formation that occurs due to the interplay between evaporation and fluid dynamics. The process of solvent evaporation from solution is first examined, which leads to the formation of a solid thin film after evaporation is complete. Next, an MGC process was simulated by introducing a flow profile coupled with the evaporative system. In this work, we gain insights into how molecules respond and reorient in the presence of a flow profile. These results indicate that both the evaporation and the flow profile have an impact on orienting small molecules in a thin film during the MCG process. Combining experimental techniques with simulations helps enhance the understanding of the forces that are significant in directing molecular aggregation during coating processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Kinetic origins of the metastable zone width in the manganese oxide Pourbaix diagram

Pourbaix diagrams show solid–aqueous phase stability as a function of pH and redox potential and can be a valuable tool to guide the hydrothermal synthesis of transition metal oxides. However, the Pourbaix diagram is based on thermodynamics, and nucleation kinetics are not readily apparent in this framework. Here, we conduct a combined experimental and theoretical study to measure the onset of MnO 2 precipitation from an MnO 4 - (aq) solution at various pH conditions, which we then compare against Pourbaix diagram phase boundaries. Using a combination of in situ X-ray absorption spectroscopy and X-ray wide-angle scattering, we directly observe the transformation kinetics from the tetrahedral MnO 4 - (aq) ion to octahedrally coordinated Mn pre-nuclei, as well as its initiation into crystalline δ'-MnO 2 at various pH. The kinetics of octahedral-Mn precursor availability is observed to govern induction times of crystalline MnO 2 nucleation, which results in a metastable zone width in the Mn–H 2 O Pourbaix diagram. These results suggest that synthesis conditions often need to be prepared far beyond the phase boundaries in a Pourbaix diagram to initiate crystallization within a reasonable timescale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding Cu incorporation in the Cu 2x Hg 2-x GeTe 4 structure using resonant x-ray diffraction

The ability to control carrier concentration based on the extent of Cu solubility in the Cu 2x Hg 2-x GeTe 4 alloy compound (where 0 ≤ x ≤ 1) makes Cu 2x Hg 2-x GeTe 4 an interesting case study in the field of thermoelectrics. While Cu clearly plays a role in this process, it is unknown exactly how Cu incorporates into the Cu 2x Hg 2-x GeTe 4 crystal structure and how this affects the carrier concentration. In this work, we use a combination of resonant energy x-ray diffraction (REXD) experiments and density functional theory (DFT) calculations to elucidate the nature of Cu incorporation into the Cu 2x Hg 2-x GeTe 4 structure. REXD across the Cu k edge facilitates the characterization of Cu incorporation in the Cu 2x Hg 2-x GeTe 4 alloy and enables direct quantification of antisite defects. Here, we find that Cu substitutes for Hg at a 2:1 ratio, wherein Cu annihilates a vacancy and swaps with a Hg atom. DFT calculations confirm this result and further indicate that the incorporation of Cu occurs preferentially on one of the z = 1/4 or z = 3/4 planes before filling the other plane. Furthermore, the amount of Cu Hg antisite defects quantified by REXD was found to be directly proportional to the experimentally measured hole concentration, indicating that the Cu Hg defects are the driving force for tuning carrier concentration in the Cu 2x Hg 2-x GeTe 4 alloy. The link uncovered here between crystal structure, or more specifically antisite defects, and carrier concentration can be extended to similar cation-disordered material systems and will aid the development of improved thermoelectric and other functional materials through defect engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of Oxygen and Water on the Formation and Degradation Processes of (CH 3 NH 3 )PbI 3 Thin Films

Thin films of lead halide perovskites have attracted considerable interest for optoelectronic applications, especially photovoltaics. The influence of oxygen and water have been well studied on fully formed films in an effort to improve and understand material stability. In this paper, we study the influence of oxygen and water exposure on unconverted, precursor films prior to the conversion to the (CH 3 NH 3 )PbI 3 perovskite phase. We find that, for the PbCl 2 synthesis route studied here, extended oxygen exposure can lead to increased PbI 2 in the final film. Additionally, a reversible transformation into the perovskite structure can be driven by exposure to high humidity, which we hypothesize is due to the deliquescent nature of methylammonium chloride in the precursor film. Upon prolonged exposure to humidity, the film undergoes an irreversible phase transformation to a previously unknown crystalline phase of (CH 3 NH 3 ) 2 PbI 3 Cl, the structure of which is solved using X-ray powder diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction

Metal parts produced by laser powder bed fusion (LPBF) additive manufacturing exhibit characteristic microstructures comparable to those observed in laser welding. The primary cause of this characteristic microstructure is rapid, localized heating and cooling cycles, which result in extreme thermal gradients where material solidification is followed by fast cooling in the solid state. The final microstructure and mechanical performance are also influenced by pore formation caused by melt pool fluid dynamics. Here, we use high speed, in situ X-ray diffraction to probe the kinetics of cooling and solid-solid phase transitions after laser melting in two aerospace titanium alloys: Ti-6Al-4V, an α + β alloy; and Ti-5Al-5V-5Mo-3Cr, a near-β alloy. We complement these diffraction studies with in situ X-ray imaging to probe melt pool dynamics and pore formation. From these two complementary probes, we quantify pore formation during melting and the subsequent microstructural evolution as the material rapidly cools after solidification. These results are critical for understanding defect formation and residual stress development in different titanium alloys under LPBF conditions and can help inform process models to predict final part performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Role of Dimethylammonium in Bandgap Modulation for Stable Halide Perovskites

Halide perovskites with bandgaps of 1.70–1.85 eV are of interest for multijunction photovoltaics. Mixing halides on the X site of the ABX3-structured perovskite system is a common way to reach these bandgaps, but this method introduces phase segregation pathways, limiting photovoltage. Recently, a new strategy for increasing the bandgap has been introduced, where cations normally too large to fit into the lattice, but compensated by smaller cations, are substituted on the A site. The mechanism underlying the increase of the bandgap with this strategy remained an open question. Here, we show that by partial substitution of the large dimethylammonium (DMA) cation at the A site of FA x Cs 1–x PbI y Br 3–y perovskites, a bandgap increase is observed not only when DMA is compensated by smaller Cs cations but also when only DMA is added, which is accompanied by an expansion of the crystal lattice. Our experimental findings suggest that adding DMA is causing an unexpected tilt in the perovskite octahedra, increasing the bandgap. Efficient solar cells based on 1.73 eV DMA-incorporated materials are extremely stable, retaining 96% of their original efficiency over 2200 h at 85 °C in the dark and 92% of their original efficiency after operation at 60 °C for 500 h. Finally, this octahedral tilting strategy is a promising route for attaining efficient and stable wide bandgap perovskite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using resonant energy X-ray diffraction to extract chemical order parameters in ternary semiconductors

II–IV–V 2 materials, ternary analogs to III–V materials, are emerging for their potential applications in devices such as LEDs and solar cells. Controlling cation ordering in II–IV–V 2 materials offers the potential to tune properties at nearly fixed compositions and lattice parameters. While tuning properties at a fixed lattice constant through ordering has the potential to be a powerful tool used in device fabrication, cation ordering also creates challenges with characterization and quantification of ordering. In this work, we investigate two different methods to quantify cation ordering in ZnGeP 2 thin films: a stretching parameter calculated from lattice constants , and an order parameter determined from the cation site occupancies ( S ). We use high resolution X-ray diffraction (HRXRD) to determine and resonant energy X-ray diffraction (REXD) to extract S . REXD is critical to distinguish between elements with similar Z -number ( e.g. Zn and Ge). We found that samples with a corresponding to the ordered chalcopyrite structure had only partially ordered S values. The optical absorption onset for these films occurred at lower energy than expected for fully ordered ZnGeP 2 , indicating that S is a more accurate descriptor of cation order than the stretching parameter. Since disorder is complex and can occur on many length scales, metrics for quantifying disorder should be chosen that most accurately reflect the physical properties of interest.

36 MATERIALS SCIENCE↗