Search NASA⌕ Search

Engineering topics

Strange, Nathan J.

Publications and source records attributed to Strange, Nathan J..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Enabling a new generation of outer solar system missions: engineering design studies for nuclear electric propulsion

We discuss a nuclear electric propulsion (NEP) capability that would (1) enable a class of outer solar system missions that cannot be done with radioisotope power systems and (2) significantly enhance a range of other deep-space mission concepts. NASA plans to develop Kilopower technology for lunar surface power. Kilopower can also serve as a power source for a 10-kWe NEP system; therefore, we highlight 10-kWe NEP benefits to encourage the NASA Science Mission Directorate (SMD) to advocate (as a potential beneficiary) for NASA’s plan to develop Kilopower and to motivate further 10-kWe NEP–related concept studies.

Sotin, Christophe J.↗
NASA NTRS2019

SmallSat missions enabled by paired low-thrust hybrid rocket and low-power long-life Hall thruster

The capabilities of a SmallSat-class spacecraft targeting the outer solar system and using a combined chemical and electric propulsion system are explored. The development of compact hybrid rockets has enabled high-thrust engines to be packaged tightly enough to fit on cubesat and SmallSat spacecraft. These hybrid rockets provide 10’s-100 N of thrust depending on the propellant load & >300 s of specific impulse and have been demonstrated in both ambient and vacuum environments. Advancements in low-power long-life Hall thruster technologies have provided the potential for significantly greater propellant throughputs, enabling their use as a primary propulsion element on interplanetary spacecraft. In a recent characterization test campaign, the MaSMi-DM Hall thruster demonstrated power throttling from 150 – 1000 W with >1500 s of specific impulse available at >500 W and >40% total thrust efficiency available at >300 W; peak values of 1940 s and 53% were observed. A notional low-mass spacecraft employing a combined hybrid rocket and low-power electric propulsion system was designed and used for mission concept analysis targeting the outer solar system. Using an imposed wet mass limit of 400 kg, mission trajectories to Saturn and Uranus were generated. Orbit capture with >40% of the launch mass was shown to be possible at either target, with mission transfer times of 7.5 years and 13.5 years for Saturn and Uranus, respectively. Significant follow-on mission activities near Saturn (e.g. to Titan & Enceladus) were also possible by carrying extra propellant mass while remaining under the total wet mass limit.

Karp, Ashley C.↗
NASA NTRS2018

Magnetour: Surfing Planetary Systems on Electromagnetic and Multi-Body Gravity Fields

In this NIAC Phase One study, we propose a new mission concept, named Magnetour, to facilitate the exploration of outer planet systems and address both power and propulsion challenges. Our approach would enable a single spacecraft to orbit and travel between multiple moons of an outer planet, with no propellant required. Our approach would enable a single spacecraft to orbit and travel between multiple moons of an outer planet, with no propellant nor onboard power source required. To achieve this free-lunch _Grand Tour', we exploit the unexplored combination of magnetic and multi-body gravitational fields of planetary systems, with a unique focus on using a bare tether for power and propulsion. The main objective of the study is to develop this conceptually novel mission architecture, explore its design space, and investigate its feasibility and applicability to enhance the exploration of planetary systems within a 10-year timeframe. Propellantless propulsion technology offers enormous potential to transform the way NASA conducts outer planet missions. We hope to demonstrate that our free-lunch tour concept can replace heavy, costly, traditional chemical-based missions and can open up a new variety of trajectories around outer planets. Leveraging the powerful magnetic and multi-body gravity fields of planetary systems to travel freely among planetary moons would allow for long-term missions and provide unique scientific capabilities and flagship-class science for a fraction of the mass and cost of traditional concepts. New mission design techniques are needed to fully exploit the potential of this new concept.This final report contains the results and findings of the Phase One study, and is organized as follows. First, an overview of the Magnetour mission concept is presented. Then, the research methodology adopted for this Phase One study is described, followed by a brief outline of the main findings and their correspondence with the original Phase One task plan. Next, an overview of the environment of outer planets is provided, including magnetosphere, radiation belt and planetary moons. Then performance of electrodynamic tethers is assessed, as well as other electromagnetic systems. A method to exploit multi-body dynamics is given next. These analyses allow us to carry out a Jovian mission design to gain insight in the benefits of Magnetour. In addition, a spacecraft configuration is presented that fully incorporates the tether in the design. Finally technology roadmap considerations are discussed.

Gravity Fields↗
NASA NTRS2017

Overview of the Mission Design Reference Trajectory for NASA's Asteroid Redirect Robotic Mission

The National Aeronautics and Space Administration's (NASA's) recently cancelled Asteroid Redirect Mission was proposed to rendezvous with and characterize a 100 m plus class near-Earth asteroid and provide the capability to capture and retrieve a boulder off of the surface of the asteroid and bring the asteroidal material back to cislunar space. Leveraging the best of NASA's science, technology, and human exploration efforts, this mission was originally conceived to support observation campaigns, advanced solar electric propulsion, and NASA's Space Launch System heavy-lift rocket and Orion crew vehicle. The asteroid characterization and capture portion of ARM was referred to as the Asteroid Redirect Robotic Mission (ARRM) and was focused on the robotic capture and then redirection of an asteroidal boulder mass from the reference target, asteroid 2008 EV5, into an orbit near the Moon, referred to as a Near Rectilinear Halo Orbit where astronauts would visit and study it. The purpose of this paper is to document the final reference trajectory of ARRM and the challenges and unique methods employed in the trajectory design of the mission.

low thrust↗
NASA NTRS2017

Sensitivity of the Asteroid Redirect Robotic Mission (ARRM) to Launch Date and Asteroid Stay Time

National Aeronautics and Space Administrations (NASAs) proposed Asteroid Redirect Mission (ARM) is being designed to robotically capture and then redirect an asteroidal boulder into a stable orbit in the vicinity of the moon, where astronauts would be able to visit and study it. The current reference trajectory for the robotic portion, ARRM, assumes a launch on a Delta-IV H in the end of the calendar year 2021, with a return for astronaut operations in cislunar space in 2026. The current baseline design allocates 245 days of stay time at the asteroid for operations and boulder collection. This paper outlines analysis completed by the ARRM mission design team to understand the sensitivity of the reference trajectory to launch date and asteroid stay time.

asteroid↗
NASA NTRS2017

Sensitivity of the Asteroid Redirect Robotic Mission (ARRM) to Launch Date and Asteroid Stay Time

National Aeronautics and Space Administrations (NASAs) proposed Asteroid Redirect Mission (ARM) is being designed to robotically capture and then redirect an asteroidal boulder mass into a stable orbit in the vicinity of the moon, where astronauts would be able to visit and study it. The current reference trajectory for the robotic portion, ARRM, assumes a launch on a Delta IV H in the end of the calendar year 2021, with a return for astronaut operations in cislunar space in 2026. The current baseline design allocates 245 days of stay time at the asteroid for operations and boulder collection. This paper outlines analysis completed by the ARRM mission design team to understand the sensitivity of the reference trajectory to launch date and asteroid stay time.

trajectory analysis↗
NASA NTRS2016

Potential Cislunar and Interplanetary Proving Ground Excursion Trajectory Concepts

NASA has been investigating potential translunar excursion concepts to take place in the 2020s that would be used to test and demonstrate long duration life support and other systems needed for eventual Mars missions in the 2030s. These potential trajectory concepts could be conducted in the proving ground, a region of cislunar and near-Earth interplanetary space where international space agencies could cooperate to develop the technologies needed for interplanetary spaceflight. Enabled by high power Solar Electric Propulsion (SEP) technologies, the excursion trajectory concepts studied are grouped into three classes of increasing distance from the Earth and increasing technical difficulty: the first class of excursion trajectory concepts would represent a 90-120 day round trip trajectory with abort to Earth options throughout the entire length, the second class would be a 180-210 day round trip trajectory with periods in which aborts would not be available, and the third would be a 300-400 day round trip trajectory without aborts for most of the length of the trip. This paper provides a top-level summary of the trajectory and mission design of representative example missions of these three classes of excursion trajectory concepts.

asteroids↗
NASA NTRS2015

Mars Conjunction Crewed Missions With a Reusable Hybrid Architecture

A new crew Mars architecture has been developed that provides many potential benefits for NASA-led human Mars moons and surface missions beginning in the 2030s or 2040s. By using both chemical and electric propulsion systems where they are most beneficial and maintaining as much orbital energy as possible, the Hybrid spaceship that carries crew round trip to Mars is pre-integrated before launch and can be delivered to orbit by a single launch. After check-out on the way to cis-lunar space, it is refueled and can travel round trip to Mars in less than 1100 days, with a minimum of 300 days in Mars vicinity (opportunity dependent). The entire spaceship is recaptured into cis-lunar space and can be reused. The spaceship consists of a habitat for 4 crew attached to the Hybrid propulsion stage which uses long duration electric and chemical in-space propulsion technologies that are in use today. The hybrid architecture's con-ops has no in-space assembly of the crew transfer vehicle and requires only rendezvous of crew in a highly elliptical Earth orbit for arrival at and departure from the spaceship. The crew transfer vehicle does not travel to Mars so it only needs be able to last in space for weeks and re-enter at lunar velocities. The spaceship can be refueled and resupplied for multiple trips to Mars (every other opportunity). The hybrid propulsion stage for crewed transits can also be utilized for cargo delivery to Mars every other opportunity in a reusable manner to pre-deploy infrastructure required for Mars vicinity operations. Finally, the Hybrid architecture provides evolution options for mitigating key long-duration space exploration risks, including crew microgravity and radiation exposure.

Merrill, Raymond G.↗
NASA NTRS2014

Human Missions to Mars Orbit, Phobos, and Mars Surface Using 100-kWe-Class Solar Electric Propulsion

Solar electric propulsion (SEP) tugs in the 100-kWe range, may be utilized to preposition cargo in the Mars system to enable more affordable human missions to Phobos and to the surface of Mars. The SEP tug, a high heritage follow-on to the 50-kWe SEP spacecraft proposed for the Asteroid Redirect Robotic Mission (ARRM), would have the same structure, tankage, electric propulsion components, and avionics as the ARRM version, But with double the number of solar arrays, Hall thrusters, and power processor units (PPUs) and would be accommodated within the same launch envelope defined for ARRM. As a feasibility study, a 950-day human mission to Phobos using a conjunction class trajectory, such as the 2033 opportunity, was developed using two 100-kWe SEP vehicles to preposition a habitat at Phobos and propulsion stages in high Mars orbit (HMO). An architecture concept for a crewed Mars surface lander mission was also developed as a reference to build on the Phobos mission architecture, adding a lander element that could be delivered using chemical propulsion and aerocapture.

Price, Humphrey W.↗
NASA NTRS2012

Orbital Operations for Phobos and Deimos Exploration

One of the deep-space human exploration activities proposed for the post-Shuttle era is a mission to one of the moons of Mars, Phobos or Deimos. There are several options available to the mission architect for operations around these bodies. These options include distant retrograde orbits (DROs), Lagrange-point orbits such as halos and Lyapunov orbits, and fixed-point stationkeeping or "hovering." These three orbit options are discussed in the context of the idealized circular restricted three body problem, full-dynamics propagations, and a concept of operations. The discussion is focused on Phobos, but all results hold for Deimos

distant retrograde orbits (DROs)↗
NASA NTRS2012

Riding the Banzai Pipeline at Jupiter: Balancing Low Delta-V and Low Radiation to Reach Europa

Europa's tantalizing allure as a possible haven for life comes cloaked in a myriad of challenges for robotic spacecraft exploration. Not only are the propulsive requirements high and the solar illumination low, but the radiation environment at Jupiter administers its inexorable death sentence on any electronics dispatched to closely examine the satellite. So to the usual trades of mass, delta-V, and cost, we must add radiation dose, which tugs the trajectory solution in a contrary direction. Previous studies have concluded that adding radiation shielding mass is more efficient than using ?V to reduce the exposure time, but that position was recently challenged by a study focusing on delivering simple landers to the Europa surface. During this work, a new trajectory option was found to occupy a strategic location in the delta-V/radiation continuum - we call it the "Banzai pipeline" due to the visual similarity with the end-on view down a breaking wave, as shown in the following figures.

McElrath, Timothy P.↗
NASA NTRS2011

Small Solar Electric Propulsion Spacecraft Concept for Near Earth Object and Inner Solar System Missions

Near Earth Objects (NEOs) and other primitive bodies are exciting targets for exploration. Not only do they provide clues to the early formation of the universe, but they also are potential resources for manned exploration as well as provide information about potential Earth hazards. As a step toward exploration outside Earth's sphere of influence, NASA is considering manned exploration to Near Earth Asteroids (NEAs), however hazard characterization of a target is important before embarking on such an undertaking. A small Solar Electric Propulsion (SEP) spacecraft would be ideally suited for this type of mission due to the high delta-V requirements, variety of potential targets and locations, and the solar energy available in the inner solar system.Spacecraft and mission trades have been performed to develop a robust spacecraft design that utilizes low cost, off-the-shelf components that could accommodate a suite of different scientific payloads for NEO characterization. Mission concepts such as multiple spacecraft each rendezvousing with different NEOs, single spacecraft rendezvousing with separate NEOs, NEO landers, as well as other inner solar system applications (Mars telecom orbiter) have been evaluated. Secondary launch opportunities using the Expendable Secondary Payload Adapter (ESPA) Grande launch adapter with unconstrained launch dates have also been examined.

Solar Electric Propulsion (SEP)↗
NASA NTRS2007

Planetary Moon Cycler Trajectories

Free-return cycler trajectories repeatedly shuttle a spacecraft between two bodies using little or no fuel. Here, the cycler architecture is proposed as a complementary and alternative method for designing planetary moon tours. Previously applied enumerative cycler search and optimization techniques are generalized and specifically implemented in the Jovian and Saturnian moon systems. In addition, the algorithms are tested for general use to find non-Earth heliocentric cyclers. Overall, hundreds of ideal model ballistic cycler geometries are found and several representative cases are documented and discussed. Many of the ideal model solutions are found to remain ballistic in a zero radius sphere of influence patched conic ephemeris model, and preliminary work in a high-fidelity fully integrated model demonstrates near-ballistic cycles for several example cases.

trajectory↗
NASA NTRS2000

Automated Design of the Europa Orbiter Tour

In this paper we investigate tours of the Jovian satellites Europa, Ganymede, and Callisto for the Europa Orbiter Mission. The principal goal of the tour design is to lower arrival V(sub infinity) for the final Europa encounter while meeting all of the design constraints. Key constraints arise from considering the total time of the tour and the radiation dosage of a tour. These tours may employ 14 or more encounters with the Jovian satellites, hence there is an enormous number of possible sequences of these satellites to investigate. We develop a graphical method that greatly aids the design process.

Heaton, Andrew F.↗
NASA NTRS2000

Automated Design of the Europa Orbiter Tour

In this paper we investigate tours of the Jovian satellites Europa Ganymede, and Callisto for the Europa Orbiter Mission. The principal goal of the tour design is to lower arrival V_ for the final Europa encounter while meeting all of the design constraints. Key constraints arise from considering the total time of the tour and the radiation dosage of a tour. These tours may employ 14 or more encounters with the Jovian satellites. hence there is an enormous number of possible sequences of these satellites to investigate. We develop a graphical method that greatly aids the design process.

Heaton, Andrew F.↗