Search NASA⌕ Search

Engineering topics

Strmcnik, D

Publications and source records attributed to Strmcnik, D.

At least 19 records

Trends in activity for the water electrolyzer reactions on 3d-M(Ni,Co,Fe,Mn)-hydr(oxy)oxide catalysts.

Design and synthesis of materials for efficient electrochemical transformation of water to molecular hydrogen and of hydroxyl ions to oxygen in alkaline environments is of paramount importance in reducing energy losses in water-alkali electrolysers. Here, using 3d-M hydr(oxy)oxides, with distinct stoichiometries and morphologies in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) regions, we establish the overall catalytic activities for these reaction as a function of a more fundamental property, a descriptor, OH-M{sup 2+{delta}} bond strength (0 {le} {delta} {le} 1.5). This relationship exhibits trends in reactivity (Mn < Fe < Co < Ni), which is governed by the strength of the OH-M{sup 2+{delta}} energetic (Ni < Co < Fe < Mn). These trends are found to be independent of the source of the OH, either the supporting electrolyte (for the OER) or the water dissociation product (for the HER). The successful identification of these electrocatalytic trends provides the foundation for rational design of 'active sites' for practical alkaline HER and OER electrocatalysts.

08 HYDROGEN↗

Enhancing hydrogen evolution activities in water splitting by tailoring Li+/Ni(OH){<_2}/Pt interfaces.

Improving the sluggish kinetics for the electrochemical reduction of water to molecular hydrogen in alkaline environments is one key to reducing the high overpotentials and associated energy losses in water-alkali and chlor-alkali electrolyzers. We found that a controlled arrangement of nanometer-scale Ni(OH){sub 2} clusters on platinum electrode surfaces manifests a factor of 8 activity increase in catalyzing the hydrogen evolution reaction relative to state-of-the-art metal and metal-oxide catalysts. In a bifunctional effect, the edges of the Ni(OH){sub 2} clusters promoted the dissociation of water and the production of hydrogen intermediates that then adsorbed on the nearby Pt surfaces and recombined into molecular hydrogen. The generation of these hydrogen intermediates could be further enhanced via Li{sup +}-induced destabilization of the HO-H bond, resulting in a factor of 10 total increase in activity.

08 HYDROGEN↗

Tailoring the selectivity and stability of chemically modified platinum nanocatalysts to design highly durable anodes for PEM fuel cells.

Chemically modifying platinum with calix[4]arene yields a highly stable anode catalyst that effectively suppresses the oxidation reduction reaction without altering the maximum activity for the hydrogen oxidation reaction (see picture, Pt blue, C gray, O red, S yellow). This behavior extends from long-range-ordered stepped single-crystal surfaces to nanocatalysts.

08 HYDROGEN↗

Design and synthesis of bimetallic electrocatalyst with multilayered Pt-skin surfaces.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Li[sup +}, K{sup +} and Ba{sup 2 sup +} cations on the ORR at model and high surface area Pt and Au surfaces in alkaline solutions.

This Letter reveals new findings on the influence of noncovalent interactions on the electrochemical interface. Using surface X-ray scattering, we demonstrate that the barium cations are located at 3.4 {angstrom} away from the surface, suggesting that they are partially hydrated, though not adsorbed at the surface. The effect of the cation on the oxygen reduction reaction (ORR) ranges from significant (Pt) to little (Au), depending on the nature of the metal and cation. Finally, we show that these results, as obtained on well-defined single-crystal surfaces, correlate well with observations on high surface area nanoparticle catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective catalysts for the hydrogen oxidation and oxygen reduction reactions by patterning of platinum with calix[4]arene molecules.

The design of new catalysts for polymer electrolyte membrane fuel cells must be guided by two equally important fundamental principles: optimization of their catalytic behaviour as well as the long-term stability of the metal catalysts and supports in hostile electrochemical environments. The methods used to improve catalytic activity are diverse, ranging from the alloying and de-alloying of platinum to the synthesis of platinum core-shell catalysts. However, methods to improve the stability of the carbon supports and catalyst nanoparticles are limited, especially during shutdown (when hydrogen is purged from the anode by air) and startup (when air is purged from the anode by hydrogen) conditions when the cathode potential can be pushed up to 1.5 V. Under the latter conditions, stability of the cathode materials is strongly affected (carbon oxidation reaction) by the undesired oxygen reduction reaction (ORR) on the anode side. This emphasizes the importance of designing selective anode catalysts that can efficiently suppress the ORR while fully preserving the Pt-like activity for the hydrogen oxidation reaction. Here, we demonstrate that chemically modified platinum with a self-assembled monolayer of calix[4]arene molecules meets this challenging requirement.

08 HYDROGEN↗

Enhanced electrocatalysis of the oxygen reduction reaction based on patterning of platinum surfaces with cyanide

The slow rate of the oxygen reduction reaction in the phosphoric acid fuel cell is the main factor limiting its wide application. Here, we present an approach that can be used for the rational design of cathode catalysts with potential use in phosphoric acid fuel cells, or in any environments containing strongly adsorbing tetrahedral anions. This approach is based on molecular patterning of platinum surfaces with cyanide adsorbates that can efficiently block the sites for adsorption of spectator anions while the oxygen reduction reaction proceeds unhindered. We also demonstrate that, depending on the supporting electrolyte anions and cations, on the same CN-covered Pt(111) surface, the oxygen reduction reaction activities can range from a 25-fold increase to a 50-fold decrease. This behaviour is discussed in the light of the role of covalent and non-covalent interactions in controlling the ensemble of platinum active sites required for high turn over rates of the oxygen reduction reaction.

30 DIRECT ENERGY CONVERSION↗

The Role of Non-Covalent Interactions in Electrocatalytic Fuel-Cell Reactions on Platinum

The classic models of metal electrode–electrolyte interfaces generally focus on either covalent interactions between adsorbates and solid surfaces or on long-range electrolyte–metal electrostatic interactions. Here we demonstrate that these traditional models are insufficient. To understand electrocatalytic trends in the oxygen reduction reaction (ORR), the hydrogen oxidation reaction (HOR) and the oxidation of methanol on platinum surfaces in alkaline electrolytes, noncovalent interactions must be considered. We find that non-covalent interactions between hydrated alkali metal cations M⁺(H2O)x and adsorbed OH (OHad) species increase in the same order as the hydration energies of the corresponding cations (Li⁺>> Na⁺> K⁺> Cs⁺) and also correspond to an increase in the concentration of OHad–M⁺ (H2O)x clusters at the interface. These trends are inversely proportional to the activities of the ORR, the HOR and the oxidation of methanol on platinum (Cs⁺> K⁺> Na⁺>> Li⁺), which suggests that the clusters block the platinum active sites for electrocatalytic reactions. interface. These trends are inversely proportional to the activities of the ORR, the HOR and the oxidation of methanol on platinum (Cs+> K+> Na+>> Li+), which suggests that the clusters block the platinum active sites for electrocatalytic reactions.

08 HYDROGEN↗

Novel method for fast characterization of high-surface-area electrocatalytic materials using carbon fiber microelectrode.

A carbon fiber microelectrode (CFME) was used for characterization of the nanoparticle catalysts as an alternative to the well-established rotating disk electrode (RDE) method. We found that the novel CFME method yielded comparable results to the RDE method when investigating the adsorption/desorption processes as well the specific activity for reactions such as the oxygen reduction reaction. Its major advantage over the RDE method is a fast sample preparation and rapid measurement, reducing significantly the time of a single sample characterization from 2-3 h to a favorable 5-10 min.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promotion of the oxidation of carbon monoxide at stepped platinum single-crystal electrodes in alkaline media by lithium and beryllium cations.

The role of alkali cations (Li{sup +}, Na{sup +}, K{sup +}, Cs{sup +}, and Be{sup 2+}) on the blank voltammetric response and the oxidative stripping of carbon monoxide from stepped Pt single-crystal electrodes in alkaline media has been investigated by cyclic voltammetry. A strong influence of the nature of the cation on both the blank voltammetric profile and the CO oxidation is observed and related to the influence of the cation on the specific adsorption of OH on the platinum surface. Especially Li{sup +} and Be{sup 2+} cations markedly affect the adsorption of OH and thereby have a significant promoting effect on CO{sub ads} oxidation. The voltammetric experiments suggest that, on Pt(111), the influence of Li{sup +} (and Be{sup 2+}) is primarily through a weakening of the repulsive interactions between the OH in the OH adlayer, whereas in the presence of steps also, the onset of OH adsorption is at a lower potential, both on steps and on terraces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three phase interfaces at electrified metal-solid electrolyte systems I. study of the Pt(hkl)-Nafion interface.

A voltammetric fingerprinting approach has been used to probe the nature of Pt-Nafion three phase interfaces for Pt(hkl) and polycrystalline platinum surfaces. Nature of adsorbing species is identified as the sulfonate anions via CO charge displacement technique. The affinity for the sulfonate anions to adsorb on the electrode surface is investigated. Adsorption strength of the sulfonate anions with the electrode surface is compared with other strongly adsorbing anions such as (bi) sulfates and chlorides. Various factors that influence the adsorption properties of the sulfonate anions are studied. Nature and strength of the anion interaction with various surface geometries is also discussed. A physical model is presented to describe the observed phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monodisperse Pt{sub 3}Co nanoparticles as a catalyst for the oxygen reduction reaction : size-dependent activity.

Monodisperse Pt{sub 3}Co nanoparticles with size controlled from 3 to 9 nm have been synthesized through an organic solvothermal approach and applied as electrocatalysts for the oxygen reduction reaction. Electrochemical study shows that the Pt{sub 3}Co nanoparticles are highly active for the oxygen reduction reaction and the activity is size-dependent. The optimal size for maximal mass activity was established to be around 4.5 nm by balancing the electrochemically active surface area and specific activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-induced ordering of metal/adsorbate structures at electrochemical interfaces.

The influence of temperature changes in water-based electrolytes on the atomic structure at the electrochemical interface has been studied using in situ surface X-ray scattering (SXS) in combination with cyclic voltammetry. Results are presented for the potential-dependent surface reconstruction of Au(100), the adsorption and ordering of bromide anions on the Au(100) surface, and the adsorption and oxidation of CO on Pt(111) in pure HClO{sub 4} and in the presence of anions. These systems represent a range of structural phenomena, namely metal surface restructuring and ordering transitions in both nonreactive spectator species and reactive adsorbate layers. The key effect of temperature appears to be in controlling the kinetics of the surface reactions that involve oxygenated species, such as hydroxyl adsorption and oxide formation. The results indicate that temperature effects should be considered in the determination of structure-function relationships in many important electrochemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗